Hampshire · England
Chimney stack repairs in Hampshire
We carry out chimney stack repairs across Hampshire, from the larger towns to smaller places nearby. Much of Hampshire sits on clay that shrinks in dry summers and swells in wet winters. Every job starts with the cause, then the repair is specified to match it.
Guide price from£560per stack inc VAT
- Area
- Hampshire
- Pricing region
- South East
- Ground
- Shrinkable clay widespread
- Towns listed
- 22
Is Hampshire prone to ground movement?
Central Hampshire is chalk, while the south around Portsmouth, Southampton and the New Forest fringe and the north-east around Farnborough sit on London Clay, Reading Beds and other clays and sands. The clay areas see seasonal movement near trees.
Ground movement here is more often linked to soils, drains and trees than to mining. Across Hampshire, most homes are Victorian terraces in Portsmouth and Southampton, 1930s semis, and large post-war and new-build estates.
What should you budget for chimney stack repairs in Hampshire?
The ranges below reflect typical South East costs for chimney stack repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Repointing, flaunching and minor brick repairs | £560 – £2,250 | per stack |
| Partial or full stack rebuild | £3,350 – £11,200 | per stack |
| Stack restraint or strappingest. | £450 – £1,350 | per stack |
Repair options we may recommend
Flaunching and pot resetting
Old cracked flaunching is broken out, pots are lifted and reset or replaced, and new flaunching is formed to a fall so water runs off. Unused flues can be capped with ventilated caps, which keeps rain out while letting the flue breathe.
Best for: Loose pots and cracked mortar at the top of the stack
Stack restraint or strapping
A stack that has leaned slightly but is otherwise sound can be restrained with stainless straps or ties fixed back to the roof structure or the gable. This stops further movement without taking the stack down, and is often combined with repointing.
Best for: Slightly leaning stacks with sound brickwork
Partial or full rebuild
Where the lean is pronounced or the brickwork is badly decayed, the stack is taken down to sound masonry, often to roof level, and rebuilt plumb with new flashings and flaunching. Original bricks are cleaned and reused where possible to keep the appearance.
Best for: Badly leaning or decayed stacks
What to expect when we carry out chimney stack repairs
Look from the ground
Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.
Scaffold to the stack
Safe access is set up with a working platform around the stack. On terraces we may need to agree access over a neighbour’s roof, and a council licence is arranged where the scaffold stands on the pavement.
Weatherproof and clear
Caps or cowls are fitted where agreed, the roof around the stack is checked for slipped tiles, and debris is cleared from gutters. You receive photos of the finished stack taken from the scaffold, since it is hard to see from the ground.
Is it time for chimney stack repairs? Common signs
- Damp patches on the chimney breast inside, especially after rain
- Mortar washed out of joints, leaving bricks standing proud
- Cracked or missing flaunching around the top of the stack
- A stack visibly leaning when you look along the roof ridge
Do you need approval for chimney stack repairs in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Towns in Hampshire we cover for chimney stack repairs
- Southampton
- Portsmouth
- Basingstoke
- Waterlooville
- Farnborough
- Eastleigh
- Winchester
- Havant
- Andover
- Fareham
- Aldershot
- Fleet
- Totton
- New Milton
- Bordon
- Hythe
- Alton
- Emsworth
- Hedge End
- Romsey
- Hayling Island
- Tadley
Your chimney stack repairs questions
Is the ground in Hampshire prone to subsidence?
Central Hampshire is chalk, while the south around Portsmouth, Southampton and the New Forest fringe and the north-east around Farnborough sit on London Clay, Reading Beds and other clays and sands. The clay areas see seasonal movement near trees. Ground movement here is more often linked to soils, drains and trees than to mining. Only an investigation on site can say why a particular building has moved.
How much will chimney stack repairs cost in Hampshire?
On South East rates, chimney stack repairs starts from about £560 per stack, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Should I remove my chimney stack instead of repairing it?
It depends on whether you use the flue, the stack’s condition and how it relates to the house next door. Taking a stack down below the roofline changes the structure and the roof, and on a terrace it can affect your neighbour. We can price both options.
Do I need scaffolding for chimney repairs?
In almost all cases, yes. Safe work on a stack needs a stable platform at stack height, which usually means scaffold. Ladders and roof ladders do not give a safe place to repoint, lift pots or rebuild brickwork.
Why is my chimney stack leaning?
Most leaning stacks are caused by sulphate attack, where chemicals from old flue gases make the mortar expand more on the wetter side, so the stack bends away from the weather. Frost damage and failed pointing can make it worse. A recently leaning stack can also signal problems below.