Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Hedge End · Hampshire

Chimney stack repairs in Hedge End

Plenty can be judged about a Hedge End chimney from the pavement. A lean, tilted pots or patchy pointing are often visible from the ground, and photos with a zoom tell us a lot before anyone goes up.

Guide price from£560per stack inc VAT

Brick chimney stack being rebuilt with new flaunching on a slate roof
Postcodes
SO30
Population
about 18,000
Area
Hampshire
Pricing region
South East

How do local ground conditions affect chimney stack repairs in Hedge End?

We cover Hedge End and its postcode districts SO30, part of Hampshire, with a population of roughly 18,000. If you are just outside Hedge End, we also cover Eastleigh (4 miles), Southampton (5 miles) and Hythe (6 miles).

Much of Hampshire sits on clay that shrinks in dry summers and swells in wet winters. Ground movement here is more often linked to soils, drains and trees than to mining. What you mostly find across Hampshire: Victorian terraces in Portsmouth and Southampton, 1930s semis, and large post-war and new-build estates.

What should you budget for chimney stack repairs in Hedge End?

Guide prices below are for homes in Hedge End, on South East rates and including VAT. A survey or good photos let us turn them into a fixed written price.

Guide prices inc VAT on South East rates. Items marked est. are our estimates.
ItemGuide pricePer
Repointing, flaunching and minor brick repairs£560 – £2,250per stack
Partial or full stack rebuild£3,350 – £11,200per stack
Stack restraint or strappingest.£450 – £1,350per stack

Repair options we may recommend

Partial or full rebuild

Where the lean is pronounced or the brickwork is badly decayed, the stack is taken down to sound masonry, often to roof level, and rebuilt plumb with new flashings and flaunching. Original bricks are cleaned and reused where possible to keep the appearance.

Best for: Badly leaning or decayed stacks

Stack restraint or strapping

A stack that has leaned slightly but is otherwise sound can be restrained with stainless straps or ties fixed back to the roof structure or the gable. This stops further movement without taking the stack down, and is often combined with repointing.

Best for: Slightly leaning stacks with sound brickwork

What to expect when we carry out chimney stack repairs

  1. Look from the ground

    Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.

  2. Check what is below

    We ask whether any chimney breasts have been removed, and check the loft and rooms below for cracking. If a breast has gone without proper support, we recommend an independent chartered structural engineer before any stack work.

  3. Weatherproof and clear

    Caps or cowls are fitted where agreed, the roof around the stack is checked for slipped tiles, and debris is cleared from gutters. You receive photos of the finished stack taken from the scaffold, since it is hard to see from the ground.

Is it time for chimney stack repairs? Common signs

  • Cracked or missing flaunching around the top of the stack
  • Chimney pots that are loose, tilted or cracked at the base
  • Bits of brick, mortar or render landing in the garden or gutter

Rules for chimney stack repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Your chimney stack repairs questions

How much will chimney stack repairs cost in Hedge End?

Guide prices for chimney stack repairs in Hedge End start from about £560 per stack, including VAT, on South East rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you cover Hedge End?

We do. Hedge End and the surrounding area are covered, including nearby Eastleigh and Southampton. A free initial assessment from your photos is the first step.

Is the ground in Hampshire prone to subsidence?

Central Hampshire is chalk, while the south around Portsmouth, Southampton and the New Forest fringe and the north-east around Farnborough sit on London Clay, Reading Beds and other clays and sands. The clay areas see seasonal movement near trees. Only an investigation can say why a particular building has moved.

Why is my chimney stack leaning?

Most leaning stacks are caused by sulphate attack, where chemicals from old flue gases make the mortar expand more on the wetter side, so the stack bends away from the weather. Frost damage and failed pointing can make it worse. A recently leaning stack can also signal problems below.

What is chimney flaunching?

Flaunching is the sloped bed of mortar on top of a chimney stack that holds the pots in place and throws rainwater off. When it cracks, water gets into the stack and pots can work loose. Renewing it is one of the most common stack repairs.

Other structural repairs in Hedge End

Chimney stack repairs near Hedge End

Send zoomed photos of the chimney stack at your Hedge End home, from the street and the garden, for a free initial assessment.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote