Wiltshire · England
Chimney stack repairs in Wiltshire
Homes in Wiltshire are mostly stone cottages. That matters for chimney stack repairs: footings, wall construction and mortar all vary with the age of the building. Parts of Wiltshire have clay that can shrink near trees in dry spells.
Guide price from£515per stack inc VAT
- Area
- Wiltshire
- Pricing region
- South West
- Ground
- Clay in parts
- Towns listed
- 9
Is Wiltshire prone to ground movement?
Southern Wiltshire is chalk, while the north around Swindon, Chippenham and Trowbridge sits on Oxford and Kimmeridge Clays that are prone to seasonal movement near trees. Bath stone was mined underground around Corsham.
Ground movement here is more often linked to soils, drains and trees than to mining. Housing stock in Wiltshire: Stone cottages, railway terraces in Swindon, and large post-war and new-build estates.
How much will chimney stack repairs cost in Wiltshire?
Prices in Wiltshire are worked out on South West rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.
| Item | Guide price | Per |
|---|---|---|
| Repointing, flaunching and minor brick repairs | £515 – £2,050 | per stack |
| Partial or full stack rebuild | £3,100 – £10,300 | per stack |
| Stack restraint or strappingest. | £410 – £1,250 | per stack |
Which repair method suits a home in Wiltshire?
Partial or full rebuild
Where the lean is pronounced or the brickwork is badly decayed, the stack is taken down to sound masonry, often to roof level, and rebuilt plumb with new flashings and flaunching. Original bricks are cleaned and reused where possible to keep the appearance.
Best for: Badly leaning or decayed stacks
Repointing and brick repairs
Eroded joints are raked out and repointed in a mortar suited to the brick, often a lime-based mix on older stacks. Spalled or cracked bricks are cut out and replaced with matched reclaimed or new bricks. On many stacks this, with new flaunching, is all that is needed.
Best for: Upright stacks with weathered joints and some damaged bricks
Flaunching and pot resetting
Old cracked flaunching is broken out, pots are lifted and reset or replaced, and new flaunching is formed to a fall so water runs off. Unused flues can be capped with ventilated caps, which keeps rain out while letting the flue breathe.
Best for: Loose pots and cracked mortar at the top of the stack
What happens when we carry out chimney stack repairs in Wiltshire?
Look from the ground
Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.
Check what is below
We ask whether any chimney breasts have been removed, and check the loft and rooms below for cracking. If a breast has gone without proper support, we recommend an independent chartered structural engineer before any stack work.
Repair, restrain or rebuild
The agreed work is carried out: repointing, new flaunching and pots, restraint, or taking the stack down and rebuilding it. Lead flashings where the stack meets the roof are checked and renewed if needed.
Signs you may need chimney stack repairs
- Damp patches on the chimney breast inside, especially after rain
- Cracked or missing flaunching around the top of the stack
- A stack visibly leaning when you look along the roof ridge
- Mortar washed out of joints, leaving bricks standing proud
Do you need approval for chimney stack repairs in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Chimney stack repairs near you in Wiltshire
Chimney stack repairs in Wiltshire: questions and answers
Does the ground around Swindon cause cracking?
Southern Wiltshire is chalk, while the north around Swindon, Chippenham and Trowbridge sits on Oxford and Kimmeridge Clays that are prone to seasonal movement near trees. Bath stone was mined underground around Corsham. Ground movement here is more often linked to soils, drains and trees than to mining. Only an investigation on site can say why a particular building has moved.
How much will chimney stack repairs cost in Wiltshire?
On South West rates, chimney stack repairs starts from about £515 per stack, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Is a leaning chimney dangerous?
A leaning chimney can become dangerous, because stacks are heavy and stand high above the roof. A slight, long-standing lean may be stable for now, but a lean that is worsening, or loose bricks and pots, should be looked at quickly. Keep people away from below if anything looks loose.
Do I need scaffolding for chimney repairs?
In almost all cases, yes. Safe work on a stack needs a stable platform at stack height, which usually means scaffold. Ladders and roof ladders do not give a safe place to repoint, lift pots or rebuild brickwork.
What if a chimney breast below has been removed?
Where the breast has gone but the stack is still on the roof, how that stack is now held up is a structural question. Cracking in nearby ceilings or a dropped stack are warning signs. An independent chartered structural engineer should assess it before any repair, and we can arrange one.