Basingstoke · Hampshire
Chimney stack repairs in Basingstoke
Before repairing a stack at a Basingstoke property, we ask what lies beneath it. If a chimney breast has been removed inside, the support for the stack above needs checking by an engineer before any work on the roof.
Guide price from£560per stack inc VAT
- Postcodes
- RG21, RG22, RG23, RG24
- Population
- about 110,000
- Area
- Hampshire
- Pricing region
- South East
What should you know about the ground under Basingstoke?
Basingstoke, Hampshire: about 110,000 residents across postcode districts RG21, RG22, RG23, RG24. We also take enquiries from nearby Tadley (6 miles), Alton (9 miles) and Fleet (11 miles).
Shrinkable clay is widespread in Hampshire. Ground movement here is more often linked to soils, drains and trees than to mining. What you mostly find across Hampshire: Victorian terraces in Portsmouth and Southampton, 1930s semis, and large post-war and new-build estates.
Symptoms that point to chimney stack repairs
- Mortar washed out of joints, leaving bricks standing proud
- Bits of brick, mortar or render landing in the garden or gutter
- A stack visibly leaning when you look along the roof ridge
Guide prices for chimney stack repairs in Basingstoke
The ranges below reflect typical South East costs for chimney stack repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Repointing, flaunching and minor brick repairs | £560 – £2,250 | per stack |
| Partial or full stack rebuild | £3,350 – £11,200 | per stack |
| Stack restraint or strappingest. | £450 – £1,350 | per stack |
Methods for chimney stack repairs
Flaunching and pot resetting
Old cracked flaunching is broken out, pots are lifted and reset or replaced, and new flaunching is formed to a fall so water runs off. Unused flues can be capped with ventilated caps, which keeps rain out while letting the flue breathe.
Best for: Loose pots and cracked mortar at the top of the stack
Partial or full rebuild
Where the lean is pronounced or the brickwork is badly decayed, the stack is taken down to sound masonry, often to roof level, and rebuilt plumb with new flashings and flaunching. Original bricks are cleaned and reused where possible to keep the appearance.
Best for: Badly leaning or decayed stacks
From first photo to finished repair
Check what is below
We ask whether any chimney breasts have been removed, and check the loft and rooms below for cracking. If a breast has gone without proper support, we recommend an independent chartered structural engineer before any stack work.
Repair, restrain or rebuild
The agreed work is carried out: repointing, new flaunching and pots, restraint, or taking the stack down and rebuilding it. Lead flashings where the stack meets the roof are checked and renewed if needed.
Weatherproof and clear
Caps or cowls are fitted where agreed, the roof around the stack is checked for slipped tiles, and debris is cleared from gutters. You receive photos of the finished stack taken from the scaffold, since it is hard to see from the ground.
Rules for chimney stack repairs in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Frequently asked questions
How much should I budget for chimney stack repairs in Basingstoke?
Guide prices for chimney stack repairs in Basingstoke start from about £560 per stack, including VAT, on South East rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Can you survey a property in Basingstoke?
We do. Basingstoke and the surrounding area are covered, including nearby Tadley and Alton. A free initial assessment from your photos is the first step.
Why do houses in Hampshire crack?
Central Hampshire is chalk, while the south around Portsmouth, Southampton and the New Forest fringe and the north-east around Farnborough sit on London Clay, Reading Beds and other clays and sands. The clay areas see seasonal movement near trees. Only an investigation can say why a particular building has moved.
Why is my chimney stack leaning?
Most leaning stacks are caused by sulphate attack, where chemicals from old flue gases make the mortar expand more on the wetter side, so the stack bends away from the weather. Frost damage and failed pointing can make it worse. A recently leaning stack can also signal problems below.
What is chimney flaunching?
Flaunching is the sloped bed of mortar on top of a chimney stack that holds the pots in place and throws rainwater off. When it cracks, water gets into the stack and pots can work loose. Renewing it is one of the most common stack repairs.
Related work in Basingstoke
- Brick arch repairs
- Wall tie replacement
- Retaining wall repairs
- Roof structure repairs
- Lintel replacement
Chimney stack repairs near Basingstoke
Sharing a stack with next door in Basingstoke? We can quote for the whole stack so you and your neighbour can see the full picture.