Oxfordshire · England
Roof structure repairs in Oxfordshire
We carry out roof structure repairs across Oxfordshire, from the larger towns to smaller places nearby. Much of Oxfordshire sits on clay that shrinks in dry summers and swells in wet winters. Every job starts with the cause, then the repair is specified to match it.
Guide price from£335per rafter inc VAT
- Area
- Oxfordshire
- Pricing region
- South East
- Ground
- Shrinkable clay widespread
- Towns listed
- 7
What should you know about the ground under Oxfordshire?
Oxfordshire's vales sit on Oxford, Kimmeridge and Gault Clays, among the more shrinkage-prone clays in England, with Cotswold limestone in the north-west and chalk downs in the south.
Ground movement here is more often linked to soils, drains and trees than to mining. Housing stock in Oxfordshire: Cotswold stone villages, Victorian terraces in Oxford and Banbury, and large post-war and new-build estates around Didcot and Bicester.
Is it time for roof structure repairs? Common signs
- Struts, collars or ties cut out or missing in the loft
- Horizontal cracks in the wall just below the eaves or ceiling line
- Ridge line dipping in the middle when seen from the street
- Roof slope looking hollow or wavy between the ridge and the gutter
What should you budget for roof structure repairs in Oxfordshire?
Prices in Oxfordshire are worked out on South East rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.
| Item | Guide price | Per |
|---|---|---|
| Repairing or doubling a rafter | £335 – £670 | per rafter |
| Purlin and strut strengthening | £1,350 – £3,350 | per roof |
| Tying in roof spread (straps and ties)est. | £895 – £2,800 | per roof |
Repair options we may recommend
Purlin and strut strengthening
Undersized purlins are strengthened with extra timber or replaced, and new struts are taken down to a load-bearing wall. Where there is no suitable wall, an engineer designs the load path. Temporary props hold the roof while members are changed.
Best for: Sagging slopes, slim purlins and struts removed from the loft
Wall plate replacement
Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.
Best for: Rot along the eaves where rafters bear on the wall
Repairing or doubling rafters
Cracked, sagging or rotten rafters are strengthened by fixing a new timber alongside, often called doubling, and rotten rafter feet are cut back and spliced. The work is usually done from inside the loft with the tiles left in place, unless the covering is coming off anyway.
Best for: Individual rafters that have cracked, sagged or rotted at the feet
What to expect when we carry out roof structure repairs
Engineer’s design where needed
Where purlins, struts or ties must be redesigned, or the roof carries a heavier covering, an independent chartered structural engineer is appointed to specify the work. We can arrange this, and their design sets the sizes and fixings.
Written quote
You receive a no-obligation written quote listing each timber repair, any ties or straps, propping, scaffolding and making good. Once the repair is specified, the figure becomes a fixed price in writing.
Prop, strengthen and tie
The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.
Do you need approval for roof structure repairs in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Roof structure repairs near you in Oxfordshire
Your roof structure repairs questions
Does the ground around Oxford cause cracking?
Oxfordshire's vales sit on Oxford, Kimmeridge and Gault Clays, among the more shrinkage-prone clays in England, with Cotswold limestone in the north-west and chalk downs in the south. Ground movement here is more often linked to soils, drains and trees than to mining. Only an investigation on site can say why a particular building has moved.
How much will roof structure repairs cost in Oxfordshire?
On South East rates, roof structure repairs starts from about £335 per rafter, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Do I need a structural engineer for roof repairs?
For like-for-like repairs to a few rafters, often not. Where purlins, struts or ties are being redesigned, the covering is getting heavier or the walls are being pushed out, you usually do. Where the repair needs an engineer’s design or sign-off, an independent chartered structural engineer is appointed, and we can arrange this.
What is roof spread?
Roof spread is when the feet of the rafters move outward because nothing is tying them together firmly enough. As they spread, the ridge drops and the tops of the walls are pushed out, often with a horizontal crack below the eaves. It is fixed by adding ties, collars or straps, sometimes with rebuilding.
Do roof structure repairs need building control?
Usually yes, where the structure is strengthened or altered, or the covering becomes significantly heavier. In England and Wales that falls under Part A, in Scotland it generally needs a building warrant, and in Northern Ireland council building control approves it. We deal with building control where the work needs it.