Oxford · Oxfordshire
Roof structure repairs in Oxford
If the top of a wall at your Oxford property seems to lean out at the eaves, the roof may be spreading. Ties, collars and straps can usually hold it back, sometimes with an engineer’s design for the new load path.
Guide price from£335per rafter inc VAT
- Postcodes
- OX1, OX2, OX3, OX4
- Population
- about 160,000
- Area
- Oxfordshire
- Pricing region
- South East
What is the ground like in Oxfordshire?
With roughly 160,000 people, Oxford spans postcode districts OX1, OX2, OX3, OX4 in Oxfordshire. Nearby places we cover include Abingdon (6 miles), Didcot (10 miles) and Witney (10 miles).
Much of Oxfordshire sits on clay that shrinks in dry summers and swells in wet winters. Ground movement here is more often linked to soils, drains and trees than to mining. Typical buildings in Oxfordshire: Cotswold stone villages, Victorian terraces in Oxford and Banbury, and large post-war and new-build estates around Didcot and Bicester.
What to expect when we carry out roof structure repairs
Loft and outside survey
On site we check rafter sizes and spacing, purlins, struts, ties and wall plates, look for rot and past alterations, and measure any lean at the wall head. The covering is noted too, because its weight affects the repair.
Engineer’s design where needed
Where purlins, struts or ties must be redesigned, or the roof carries a heavier covering, an independent chartered structural engineer is appointed to specify the work. We can arrange this, and their design sets the sizes and fixings.
Written quote
You receive a no-obligation written quote listing each timber repair, any ties or straps, propping, scaffolding and making good. Once the repair is specified, the figure becomes a fixed price in writing.
Is it time for roof structure repairs? Common signs
- Ridge line dipping in the middle when seen from the street
- Roof slope looking hollow or wavy between the ridge and the gutter
- Daylight through the tiles, or timber that is damp, stained or crumbling
What should you budget for roof structure repairs in Oxford?
Guide prices below are for homes in Oxford, on South East rates and including VAT. A survey or good photos let us turn them into a fixed written price.
| Item | Guide price | Per |
|---|---|---|
| Repairing or doubling a rafter | £335 – £670 | per rafter |
| Purlin and strut strengthening | £1,350 – £3,350 | per roof |
| Tying in roof spread (straps and ties)est. | £895 – £2,800 | per roof |
Repair options we may recommend
Wall plate replacement
Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.
Best for: Rot along the eaves where rafters bear on the wall
Tying in roof spread
New ties, collars or steel straps connect opposite rafters, or fix the rafter feet and wall plate firmly to the ceiling joists, so the outward thrust is resisted. Leaning wall heads are strapped back to the roof, and a badly spread roof may need partly rebuilding first.
Best for: Walls pushed out at eaves level by spreading rafters
Rules for roof structure repairs in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Your roof structure repairs questions
How much should I budget for roof structure repairs in Oxford?
Guide prices for roof structure repairs in Oxford start from about £335 per rafter, including VAT, on South East rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Can you survey a property in Oxford?
Yes. We take enquiries from across Oxford, including OX1, OX2, OX3, OX4, and from nearby places such as Abingdon and Didcot. Send photos for a free initial view and we will tell you what happens next.
Why do houses in Oxfordshire crack?
Oxfordshire's vales sit on Oxford, Kimmeridge and Gault Clays, among the more shrinkage-prone clays in England, with Cotswold limestone in the north-west and chalk downs in the south. Only an investigation can say why a particular building has moved.
Can heavy concrete tiles damage a roof?
Yes, if the frame was designed for lighter slate or tiles and was not strengthened. The extra weight makes rafters and purlins sag and can bring on roof spread. Before re-roofing in a heavier material, have the structure checked and notify building control.
Why are there cracks just below the eaves?
A horizontal crack just below the eaves, along the front or back wall, is a common sign of roof spread. The rafters push the top of the wall outward and the masonry cracks where it hinges. Corroded wall ties can cause similar cracks, so the cause needs checking.
Related work in Oxford
- Structural crack repairs
- Extension pulling away repairs
- Chimney stack repairs
- Floor joist repairs
- Crack stitching
Roof structure repairs near Oxford
For a guide price on roof structure repairs in Oxford, try the quote tool or send photos of the ridge, the loft and the eaves.