Berkshire · England
Roof structure repairs in Berkshire
We arrange surveys and price roof structure repairs throughout Berkshire. Shrinkable clay is widespread in Berkshire, and we take that into account before recommending a method.
Guide price from£335per rafter inc VAT
- Area
- Berkshire
- Pricing region
- South East
- Ground
- Shrinkable clay widespread
- Towns listed
- 8
Why does the ground in Berkshire matter for roof structure repairs?
East Berkshire is largely London Clay with Thames terrace gravels along the river, while the west rises onto chalk downland. Houses on the clay near Slough, Windsor and Bracknell are the ones most exposed to shrink-swell movement.
Ground movement here is more often linked to soils, drains and trees than to mining. What you mostly find across Berkshire: Victorian and Edwardian terraces in Reading and Windsor, 1930s semis, and large post-war new-town estates around Bracknell.
Guide prices for roof structure repairs in Berkshire
Guide prices below are for homes in Berkshire, on South East rates and including VAT. A survey or good photos let us turn them into a fixed written price.
| Item | Guide price | Per |
|---|---|---|
| Repairing or doubling a rafter | £335 – £670 | per rafter |
| Purlin and strut strengthening | £1,350 – £3,350 | per roof |
| Tying in roof spread (straps and ties)est. | £895 – £2,800 | per roof |
Methods for roof structure repairs
Purlin and strut strengthening
Undersized purlins are strengthened with extra timber or replaced, and new struts are taken down to a load-bearing wall. Where there is no suitable wall, an engineer designs the load path. Temporary props hold the roof while members are changed.
Best for: Sagging slopes, slim purlins and struts removed from the loft
Wall plate replacement
Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.
Best for: Rot along the eaves where rafters bear on the wall
Tying in roof spread
New ties, collars or steel straps connect opposite rafters, or fix the rafter feet and wall plate firmly to the ceiling joists, so the outward thrust is resisted. Leaning wall heads are strapped back to the roof, and a badly spread roof may need partly rebuilding first.
Best for: Walls pushed out at eaves level by spreading rafters
From first photo to finished repair
Engineer’s design where needed
Where purlins, struts or ties must be redesigned, or the roof carries a heavier covering, an independent chartered structural engineer is appointed to specify the work. We can arrange this, and their design sets the sizes and fixings.
Written quote
You receive a no-obligation written quote listing each timber repair, any ties or straps, propping, scaffolding and making good. Once the repair is specified, the figure becomes a fixed price in writing.
Prop, strengthen and tie
The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.
Symptoms that point to roof structure repairs
- Daylight through the tiles, or timber that is damp, stained or crumbling
- Top of an outside wall leaning out at eaves level
- Horizontal cracks in the wall just below the eaves or ceiling line
- Roof slope looking hollow or wavy between the ridge and the gutter
Do you need approval for roof structure repairs in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Find roof structure repairs in your Berkshire town
Frequently asked questions
Why do houses in Berkshire crack?
East Berkshire is largely London Clay with Thames terrace gravels along the river, while the west rises onto chalk downland. Houses on the clay near Slough, Windsor and Bracknell are the ones most exposed to shrink-swell movement. Ground movement here is more often linked to soils, drains and trees than to mining. Only an investigation on site can say why a particular building has moved.
How much will roof structure repairs cost in Berkshire?
On South East rates, roof structure repairs starts from about £335 per rafter, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Do I need a structural engineer for roof repairs?
For like-for-like repairs to a few rafters, often not. Where purlins, struts or ties are being redesigned, the covering is getting heavier or the walls are being pushed out, you usually do. Where the repair needs an engineer’s design or sign-off, an independent chartered structural engineer is appointed, and we can arrange this.
Is a sagging roof ridge dangerous?
A slight, even dip in an old roof is often historic movement that stopped long ago. A sag that is getting worse, cracking timbers, walls pushing out at the eaves or recently removed struts should be checked soon. Avoid storing heavy items in the loft until then.
Do roof structure repairs need building control?
Usually yes, where the structure is strengthened or altered, or the covering becomes significantly heavier. In England and Wales that falls under Part A, in Scotland it generally needs a building warrant, and in Northern Ireland council building control approves it. We deal with building control where the work needs it.