East Riding of Yorkshire · England
Roof structure repairs in East Riding of Yorkshire
We arrange surveys and price roof structure repairs throughout East Riding of Yorkshire. Clay soils are found in parts of East Riding of Yorkshire, and we take that into account before recommending a method.
Guide price from£285per rafter inc VAT
- Area
- East Riding of Yorkshire
- Pricing region
- Yorkshire and the Humber
- Ground
- Clay in parts
- Towns listed
- 4
What should you know about the ground under East Riding of Yorkshire?
The Yorkshire Wolds are chalk, while Holderness and Hull sit on glacial till and estuarine clays and silts. Soft alluvial ground near the Humber can settle, and the Holderness coast is one of the fastest-eroding in Europe.
Ground movement here is more often linked to soils, drains and trees than to mining. What you mostly find across East Riding of Yorkshire: Victorian terraces in Hull, market-town houses in Beverley and Driffield, and post-war estates.
Symptoms that point to roof structure repairs
- Horizontal cracks in the wall just below the eaves or ceiling line
- Top of an outside wall leaning out at eaves level
- Daylight through the tiles, or timber that is damp, stained or crumbling
- Struts, collars or ties cut out or missing in the loft
Guide prices for roof structure repairs in East Riding of Yorkshire
Guide prices below are for homes in East Riding of Yorkshire, on Yorkshire and the Humber rates and including VAT. A survey or good photos let us turn them into a fixed written price.
| Item | Guide price | Per |
|---|---|---|
| Repairing or doubling a rafter | £285 – £570 | per rafter |
| Purlin and strut strengthening | £1,150 – £2,850 | per roof |
| Tying in roof spread (straps and ties)est. | £760 – £2,400 | per roof |
Methods for roof structure repairs
Wall plate replacement
Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.
Best for: Rot along the eaves where rafters bear on the wall
Tying in roof spread
New ties, collars or steel straps connect opposite rafters, or fix the rafter feet and wall plate firmly to the ceiling joists, so the outward thrust is resisted. Leaning wall heads are strapped back to the roof, and a badly spread roof may need partly rebuilding first.
Best for: Walls pushed out at eaves level by spreading rafters
Purlin and strut strengthening
Undersized purlins are strengthened with extra timber or replaced, and new struts are taken down to a load-bearing wall. Where there is no suitable wall, an engineer designs the load path. Temporary props hold the roof while members are changed.
Best for: Sagging slopes, slim purlins and struts removed from the loft
From first photo to finished repair
Loft and outside survey
On site we check rafter sizes and spacing, purlins, struts, ties and wall plates, look for rot and past alterations, and measure any lean at the wall head. The covering is noted too, because its weight affects the repair.
Engineer’s design where needed
Where purlins, struts or ties must be redesigned, or the roof carries a heavier covering, an independent chartered structural engineer is appointed to specify the work. We can arrange this, and their design sets the sizes and fixings.
Written quote
You receive a no-obligation written quote listing each timber repair, any ties or straps, propping, scaffolding and making good. Once the repair is specified, the figure becomes a fixed price in writing.
Do you need approval for roof structure repairs in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Roof structure repairs near you in East Riding of Yorkshire
Frequently asked questions
Does the ground around Hull cause cracking?
The Yorkshire Wolds are chalk, while Holderness and Hull sit on glacial till and estuarine clays and silts. Soft alluvial ground near the Humber can settle, and the Holderness coast is one of the fastest-eroding in Europe. Ground movement here is more often linked to soils, drains and trees than to mining. Only an investigation on site can say why a particular building has moved.
How much will roof structure repairs cost in East Riding of Yorkshire?
On Yorkshire and the Humber rates, roof structure repairs starts from about £285 per rafter, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Do I need a structural engineer for roof repairs?
For like-for-like repairs to a few rafters, often not. Where purlins, struts or ties are being redesigned, the covering is getting heavier or the walls are being pushed out, you usually do. Where the repair needs an engineer’s design or sign-off, an independent chartered structural engineer is appointed, and we can arrange this.
Is a sagging roof ridge dangerous?
A slight, even dip in an old roof is often historic movement that stopped long ago. A sag that is getting worse, cracking timbers, walls pushing out at the eaves or recently removed struts should be checked soon. Avoid storing heavy items in the loft until then.
Why are there cracks just below the eaves?
A horizontal crack just below the eaves, along the front or back wall, is a common sign of roof spread. The rafters push the top of the wall outward and the masonry cracks where it hinges. Corroded wall ties can cause similar cracks, so the cause needs checking.