North Yorkshire · England
Roof structure repairs in North Yorkshire
Roof structure repairs in North Yorkshire starts with the ground. North Yorkshire has a mix of ground, with clay in some places and firmer rock in others, and the buildings here are mostly stone cottages, so the repair has to suit both.
Guide price from£285per rafter inc VAT
- Area
- North Yorkshire
- Pricing region
- Yorkshire and the Humber
- Ground
- Clay in parts
- Towns listed
- 11
How do local ground conditions affect roof structure repairs in North Yorkshire?
North Yorkshire ranges from limestone dales and moors to clays and glacial deposits in the Vale of York, with the Selby coalfield in the south and ironstone workings in Cleveland. Teesside has areas of soft and made ground.
Parts of North Yorkshire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. What you mostly find across North Yorkshire: stone cottages, Georgian and Victorian houses in York and Harrogate, and brick terraces on Teesside.
What happens when we carry out roof structure repairs in North Yorkshire?
Send photos
Photograph the roof from across the street, both slopes if you can, and the loft timbers with a torch. Include the eaves and any cracks just below them. From these we can usually tell sag from spread and whether an engineer is needed.
Loft and outside survey
On site we check rafter sizes and spacing, purlins, struts, ties and wall plates, look for rot and past alterations, and measure any lean at the wall head. The covering is noted too, because its weight affects the repair.
Prop, strengthen and tie
The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.
Signs you may need roof structure repairs
- Daylight through the tiles, or timber that is damp, stained or crumbling
- Struts, collars or ties cut out or missing in the loft
- Ridge line dipping in the middle when seen from the street
- Horizontal cracks in the wall just below the eaves or ceiling line
How much will roof structure repairs cost in North Yorkshire?
Prices in North Yorkshire are worked out on Yorkshire and the Humber rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.
| Item | Guide price | Per |
|---|---|---|
| Repairing or doubling a rafter | £285 – £570 | per rafter |
| Purlin and strut strengthening | £1,150 – £2,850 | per roof |
| Tying in roof spread (straps and ties)est. | £760 – £2,400 | per roof |
Which repair method suits a home in North Yorkshire?
Wall plate replacement
Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.
Best for: Rot along the eaves where rafters bear on the wall
Purlin and strut strengthening
Undersized purlins are strengthened with extra timber or replaced, and new struts are taken down to a load-bearing wall. Where there is no suitable wall, an engineer designs the load path. Temporary props hold the roof while members are changed.
Best for: Sagging slopes, slim purlins and struts removed from the loft
Tying in roof spread
New ties, collars or steel straps connect opposite rafters, or fix the rafter feet and wall plate firmly to the ceiling joists, so the outward thrust is resisted. Leaning wall heads are strapped back to the roof, and a badly spread roof may need partly rebuilding first.
Best for: Walls pushed out at eaves level by spreading rafters
Do you need approval for roof structure repairs in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Roof structure repairs near you in North Yorkshire
Roof structure repairs in North Yorkshire: questions and answers
Does the ground around York cause cracking?
North Yorkshire ranges from limestone dales and moors to clays and glacial deposits in the Vale of York, with the Selby coalfield in the south and ironstone workings in Cleveland. Teesside has areas of soft and made ground. Parts of North Yorkshire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Only an investigation on site can say why a particular building has moved.
How much will roof structure repairs cost in North Yorkshire?
On Yorkshire and the Humber rates, roof structure repairs starts from about £285 per rafter, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Why are there cracks just below the eaves?
A horizontal crack just below the eaves, along the front or back wall, is a common sign of roof spread. The rafters push the top of the wall outward and the masonry cracks where it hinges. Corroded wall ties can cause similar cracks, so the cause needs checking.
Can heavy concrete tiles damage a roof?
Yes, if the frame was designed for lighter slate or tiles and was not strengthened. The extra weight makes rafters and purlins sag and can bring on roof spread. Before re-roofing in a heavier material, have the structure checked and notify building control.
Do roof structure repairs need building control?
Usually yes, where the structure is strengthened or altered, or the covering becomes significantly heavier. In England and Wales that falls under Part A, in Scotland it generally needs a building warrant, and in Northern Ireland council building control approves it. We deal with building control where the work needs it.