Cheshire · England
Roof structure repairs in Cheshire
We carry out roof structure repairs across Cheshire, from the larger towns to smaller places nearby. Cheshire has a mix of ground, with clay in some places and firmer rock in others. Every job starts with the cause, then the repair is specified to match it.
Guide price from£290per rafter inc VAT
- Area
- Cheshire
- Pricing region
- North West
- Ground
- Clay in parts
- Towns listed
- 13
What is the ground like in Cheshire?
Most of Cheshire is glacial till over Mercia Mudstone. Around Northwich and the Weaver valley, historic salt and brine extraction has caused subsidence in the past, and a separate brine subsidence compensation scheme exists for parts of the county.
Historic brine and salt working has caused ground movement in parts of Cheshire in the past. What you mostly find across Cheshire: brick terraces in Crewe, Northwich and Warrington, Victorian villas in Chester, and inter-war and post-war semis.
Is it time for roof structure repairs? Common signs
- Roof slope looking hollow or wavy between the ridge and the gutter
- Ridge line dipping in the middle when seen from the street
- Struts, collars or ties cut out or missing in the loft
- Horizontal cracks in the wall just below the eaves or ceiling line
What should you budget for roof structure repairs in Cheshire?
Prices in Cheshire are worked out on North West rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.
| Item | Guide price | Per |
|---|---|---|
| Repairing or doubling a rafter | £290 – £575 | per rafter |
| Purlin and strut strengthening | £1,150 – £2,900 | per roof |
| Tying in roof spread (straps and ties)est. | £770 – £2,400 | per roof |
Repair options we may recommend
Tying in roof spread
New ties, collars or steel straps connect opposite rafters, or fix the rafter feet and wall plate firmly to the ceiling joists, so the outward thrust is resisted. Leaning wall heads are strapped back to the roof, and a badly spread roof may need partly rebuilding first.
Best for: Walls pushed out at eaves level by spreading rafters
Wall plate replacement
Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.
Best for: Rot along the eaves where rafters bear on the wall
Purlin and strut strengthening
Undersized purlins are strengthened with extra timber or replaced, and new struts are taken down to a load-bearing wall. Where there is no suitable wall, an engineer designs the load path. Temporary props hold the roof while members are changed.
Best for: Sagging slopes, slim purlins and struts removed from the loft
What to expect when we carry out roof structure repairs
Loft and outside survey
On site we check rafter sizes and spacing, purlins, struts, ties and wall plates, look for rot and past alterations, and measure any lean at the wall head. The covering is noted too, because its weight affects the repair.
Written quote
You receive a no-obligation written quote listing each timber repair, any ties or straps, propping, scaffolding and making good. Once the repair is specified, the figure becomes a fixed price in writing.
Prop, strengthen and tie
The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.
Do you need approval for roof structure repairs in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Find roof structure repairs in your Cheshire town
- Warrington
- Chester
- Crewe
- Ellesmere Port
- Widnes
- Macclesfield
- Northwich
- Winsford
- Congleton
- Wilmslow
- Sandbach
- Nantwich
- Neston
Your roof structure repairs questions
Why do houses in Cheshire crack?
Most of Cheshire is glacial till over Mercia Mudstone. Around Northwich and the Weaver valley, historic salt and brine extraction has caused subsidence in the past, and a separate brine subsidence compensation scheme exists for parts of the county. Historic brine and salt working has caused ground movement in parts of Cheshire in the past. Only an investigation on site can say why a particular building has moved.
How much will roof structure repairs cost in Cheshire?
On North West rates, roof structure repairs starts from about £290 per rafter, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Why are there cracks just below the eaves?
A horizontal crack just below the eaves, along the front or back wall, is a common sign of roof spread. The rafters push the top of the wall outward and the masonry cracks where it hinges. Corroded wall ties can cause similar cracks, so the cause needs checking.
Can the roof be strengthened without removing the tiles?
In most cases, yes. Doubling rafters, adding struts and fitting ties can all be done from inside the loft with the coverings in place. Tiles usually only come off where timber near the eaves is badly decayed, or the roof is being re-covered anyway.
Do I need a structural engineer for roof repairs?
For like-for-like repairs to a few rafters, often not. Where purlins, struts or ties are being redesigned, the covering is getting heavier or the walls are being pushed out, you usually do. Where the repair needs an engineer’s design or sign-off, an independent chartered structural engineer is appointed, and we can arrange this.