Cheshire · England
Lintel replacement in Cheshire
Looking for lintel replacement in Cheshire? Send us photos for a free initial view. Parts of Cheshire have clay that can shrink near trees in dry spells, so we look at the ground, drains and nearby trees before recommending anything.
Guide price from£720per opening inc VAT
- Area
- Cheshire
- Pricing region
- North West
- Ground
- Clay in parts
- Towns listed
- 13
What should you know about the ground under Cheshire?
Most of Cheshire is glacial till over Mercia Mudstone. Around Northwich and the Weaver valley, historic salt and brine extraction has caused subsidence in the past, and a separate brine subsidence compensation scheme exists for parts of the county.
Historic brine and salt working has caused ground movement in parts of Cheshire in the past. Across Cheshire, most homes are brick terraces in Crewe, Northwich and Warrington, Victorian villas in Chester, and inter-war and post-war semis.
How we usually approach lintel replacement
Replacement with a cavity tray
A damp-proof membrane is laid over the new lintel with stop ends and weep holes, so water running down the cavity is directed out rather than into the house. Many older lintels were installed without one, which is often why they failed.
Best for: Cavity walls with damp above windows
Inner and outer lintel replacement
Solid walls and some cavity walls carry separate lintels on the inside and outside faces. Where both have failed, each is replaced in turn, keeping the wall supported throughout. Internal plaster and reveals are then made good and redecorated where included.
Best for: Older solid walls with rotten timber across the inner face
Like-for-like replacement
The failed lintel comes out and one of suitable type and size is bedded on mortar with adequate bearing at each end. Bricks above are relaid to match the original bond and the joints are pointed to blend with the surrounding wall.
Best for: Standard windows and doors with a single failed lintel
What happens during lintel replacement, step by step?
Specify the replacement
We confirm the lintel type, length and bearing needed. For wide openings, bays or walls with unusual loads, an engineer may specify it, and where the repair needs an engineer’s design or sign-off we can arrange one.
Remove and replace
Brickwork is carefully taken out above the lintel, the old lintel removed and the new one bedded level on full bearings. A cavity tray goes in where relevant, then the brickwork above is relaid.
Remove supports and make good
Once the mortar has gained strength, props and needles come out and their holes are made good. Pointing, reveals and plaster are finished, and the window is refitted or checked for smooth operation.
What to look for before calling about lintel replacement
- Damp patches on the inside wall just above a window
- Brickwork above an opening visibly dipping in the middle
- Window or door frames that have started to bind or distort
- Rust stains or flaking steel showing above the frame
Lintel replacement prices in Cheshire
Prices in Cheshire are worked out on North West rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.
| Item | Guide price | Per |
|---|---|---|
| Standard window or door opening | £720 – £2,400 | per opening |
| Wide or bay openingest. | £1,900 – £4,300 | per opening |
| Making good inside and outest. | £145 – £575 | per opening |
Do you need approval for lintel replacement in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Lintel replacement near you in Cheshire
- Warrington
- Chester
- Crewe
- Ellesmere Port
- Widnes
- Macclesfield
- Northwich
- Winsford
- Congleton
- Wilmslow
- Sandbach
- Nantwich
- Neston
Questions about lintel replacement in Cheshire
Does the ground around Warrington cause cracking?
Most of Cheshire is glacial till over Mercia Mudstone. Around Northwich and the Weaver valley, historic salt and brine extraction has caused subsidence in the past, and a separate brine subsidence compensation scheme exists for parts of the county. Historic brine and salt working has caused ground movement in parts of Cheshire in the past. Only an investigation on site can say why a particular building has moved.
How much will lintel replacement cost in Cheshire?
On North West rates, lintel replacement starts from about £720 per opening, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
How do I know if a lintel has failed?
The most common sign is a diagonal or stepped crack running up from the top corner of a window or door. Others include a dip in the brickwork above, rust or rot visible at the lintel edge, and windows that start to stick. A crack alone can have other causes, so it is worth checking.
What is a cavity tray and do I need one?
A cavity tray is a damp-proof membrane above a lintel that catches water running down inside a cavity wall and sends it out through weep holes. If your wall is cavity construction and the original lintel had no tray, fitting one with the new lintel is usually sensible.
How long does it take to replace a lintel?
Most single lintels are replaced in one to two days. The props stay in until the mortar has gained enough strength, and wide bays or openings with both inner and outer lintels can take longer. The window can usually be used again once the supports come out.