Crewe · Cheshire
Lintel replacement in Crewe
Bay windows on older houses around Crewe often hide a timber lintel behind the face brickwork. When that timber rots, the bay brickwork drops and cracks, and replacing it properly means supporting the wall above throughout the job.
Guide price from£720per opening inc VAT
- Postcodes
- CW1, CW2
- Population
- about 76,000
- Area
- Cheshire
- Pricing region
- North West
What should you know about the ground under Crewe?
With roughly 76,000 people, Crewe spans postcode districts CW1, CW2 in Cheshire. Nearby places we cover include Nantwich (4 miles), Sandbach (5 miles) and Winsford (7 miles).
Clay soils are found in parts of Cheshire. Historic brine and salt working has caused ground movement in parts of Cheshire in the past. Across Cheshire, most homes are brick terraces in Crewe, Northwich and Warrington, Victorian villas in Chester, and inter-war and post-war semis.
Methods for lintel replacement
Like-for-like replacement
The failed lintel comes out and one of suitable type and size is bedded on mortar with adequate bearing at each end. Bricks above are relaid to match the original bond and the joints are pointed to blend with the surrounding wall.
Best for: Standard windows and doors with a single failed lintel
Replacement with a cavity tray
A damp-proof membrane is laid over the new lintel with stop ends and weep holes, so water running down the cavity is directed out rather than into the house. Many older lintels were installed without one, which is often why they failed.
Best for: Cavity walls with damp above windows
From first photo to finished repair
Support the wall
Props or needles are set so the brickwork above carries no load on the old lintel. Windows are protected or temporarily removed where the work demands it, and the room inside is sheeted against dust.
Remove and replace
Brickwork is carefully taken out above the lintel, the old lintel removed and the new one bedded level on full bearings. A cavity tray goes in where relevant, then the brickwork above is relaid.
Remove supports and make good
Once the mortar has gained strength, props and needles come out and their holes are made good. Pointing, reveals and plaster are finished, and the window is refitted or checked for smooth operation.
Symptoms that point to lintel replacement
- Window or door frames that have started to bind or distort
- Damp patches on the inside wall just above a window
- Rust stains or flaking steel showing above the frame
Guide prices for lintel replacement in Crewe
The ranges below reflect typical North West costs for lintel replacement, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Standard window or door opening | £720 – £2,400 | per opening |
| Wide or bay openingest. | £1,900 – £4,300 | per opening |
| Making good inside and outest. | £145 – £575 | per opening |
Rules for lintel replacement in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Frequently asked questions
What is the price of lintel replacement in Crewe?
Guide prices for lintel replacement in Crewe start from about £720 per opening, including VAT, on North West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you carry out lintel replacement in Crewe?
Yes, Crewe is covered, along with postcode districts CW1, CW2. We also cover nearby Nantwich and Sandbach.
Does the ground around Crewe cause cracking?
Most of Cheshire is glacial till over Mercia Mudstone. Around Northwich and the Weaver valley, historic salt and brine extraction has caused subsidence in the past, and a separate brine subsidence compensation scheme exists for parts of the county. Only an investigation can say why a particular building has moved.
How do I know if a lintel has failed?
The most common sign is a diagonal or stepped crack running up from the top corner of a window or door. Others include a dip in the brickwork above, rust or rot visible at the lintel edge, and windows that start to stick. A crack alone can have other causes, so it is worth checking.
Do I need building regulations approval to replace a lintel?
In England and Wales, replacing a lintel is structural work and building control will usually need to approve it. Rules differ in Scotland and Northern Ireland. We deal with building control where the work needs it, and include the cost in the quote.
More repairs we carry out in Crewe
Lintel replacement near Crewe
Send photos of the cracked or sagging opening at your Crewe home for a free initial assessment and an honest view on the lintel.