Lancashire · England
Lintel replacement in Lancashire
Homes in Lancashire are mostly stone and brick mill terraces. That matters for lintel replacement: footings, wall construction and mortar all vary with the age of the building. Parts of Lancashire have clay that can shrink near trees in dry spells.
Guide price from£720per opening inc VAT
- Area
- Lancashire
- Pricing region
- North West
- Ground
- Clay in parts
- Towns listed
- 20
What is the ground like in Lancashire?
Lancashire is mostly glacial till over sandstone and mudstone, with the Burnley and Accrington coalfield in the east and soft coastal and estuarine ground on the Fylde. Old mill and mine sites leave made ground in many towns.
Parts of Lancashire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Across Lancashire, most homes are stone and brick mill terraces, seaside villas in Blackpool and Lytham, and inter-war and post-war semis.
How much will lintel replacement cost in Lancashire?
Guide prices below are for homes in Lancashire, on North West rates and including VAT. A survey or good photos let us turn them into a fixed written price.
| Item | Guide price | Per |
|---|---|---|
| Standard window or door opening | £720 – £2,400 | per opening |
| Wide or bay openingest. | £1,900 – £4,300 | per opening |
| Making good inside and outest. | £145 – £575 | per opening |
Which repair method suits a home in Lancashire?
Inner and outer lintel replacement
Solid walls and some cavity walls carry separate lintels on the inside and outside faces. Where both have failed, each is replaced in turn, keeping the wall supported throughout. Internal plaster and reveals are then made good and redecorated where included.
Best for: Older solid walls with rotten timber across the inner face
Propping and needling
Adjustable props carry the wall above while the old lintel comes out. For heavier walls, short steel needles are passed through holes cut above the opening and propped on both sides, taking the load off the lintel completely. The supports stay until the new work has set.
Best for: Openings with heavy walls, upper floors or bay windows above
Like-for-like replacement
The failed lintel comes out and one of suitable type and size is bedded on mortar with adequate bearing at each end. Bricks above are relaid to match the original bond and the joints are pointed to blend with the surrounding wall.
Best for: Standard windows and doors with a single failed lintel
What happens when we carry out lintel replacement in Lancashire?
Specify the replacement
We confirm the lintel type, length and bearing needed. For wide openings, bays or walls with unusual loads, an engineer may specify it, and where the repair needs an engineer’s design or sign-off we can arrange one.
Support the wall
Props or needles are set so the brickwork above carries no load on the old lintel. Windows are protected or temporarily removed where the work demands it, and the room inside is sheeted against dust.
Remove and replace
Brickwork is carefully taken out above the lintel, the old lintel removed and the new one bedded level on full bearings. A cavity tray goes in where relevant, then the brickwork above is relaid.
Signs you may need lintel replacement
- Damp patches on the inside wall just above a window
- Rust stains or flaking steel showing above the frame
- Window or door frames that have started to bind or distort
- Brickwork above an opening visibly dipping in the middle
Do you need approval for lintel replacement in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Towns in Lancashire we cover for lintel replacement
- Preston
- Burnley
- Blackburn
- Blackpool
- Morecambe
- Lancaster
- Lytham St Annes
- Skelmersdale
- Leyland
- Accrington
- Chorley
- Darwen
- Thornton-Cleveleys
- Nelson
- Fleetwood
- Ormskirk
- Rawtenstall
- Colne
- Poulton-le-Fylde
- Heysham
Lintel replacement in Lancashire: questions and answers
Is the ground in Lancashire prone to subsidence?
Lancashire is mostly glacial till over sandstone and mudstone, with the Burnley and Accrington coalfield in the east and soft coastal and estuarine ground on the Fylde. Old mill and mine sites leave made ground in many towns. Parts of Lancashire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Only an investigation on site can say why a particular building has moved.
How much will lintel replacement cost in Lancashire?
On North West rates, lintel replacement starts from about £720 per opening, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
How long does it take to replace a lintel?
Most single lintels are replaced in one to two days. The props stay in until the mortar has gained enough strength, and wide bays or openings with both inner and outer lintels can take longer. The window can usually be used again once the supports come out.
What is a cavity tray and do I need one?
A cavity tray is a damp-proof membrane above a lintel that catches water running down inside a cavity wall and sends it out through weep holes. If your wall is cavity construction and the original lintel had no tray, fitting one with the new lintel is usually sensible.
What does needling a wall mean?
Needling means passing short steel members through holes cut in the wall just above the opening and supporting them on props on both sides. The needles take the weight of the wall above, so the old lintel can be removed safely without any brickwork dropping.