Devon · England
Crack stitching in Devon
Across Devon, requests for crack stitching usually begin with a crack someone has noticed getting wider. Clay shrinkage is less of a concern in Devon, so other causes such as drains, poor footings or older walls are checked first. A repair only lasts if the reason for the movement has stopped.
Guide price from£80per metre of crack inc VAT
- Area
- Devon
- Pricing region
- South West
- Ground
- Mostly firmer ground
- Towns listed
- 10
Is Devon prone to ground movement?
Devon's ground is mostly older mudstones, sandstones and granite, so shrinkable-clay subsidence is less widespread than further east. Older solid-walled and cob buildings, steep sites and retaining walls are the more common structural concerns.
Old metal-mine shafts and workings are recorded in places, so mining searches are routine for some properties. Across Devon, most homes are cob and stone cottages, Victorian terraces in Exeter, Plymouth and Torbay, and post-war estates.
What should you budget for crack stitching in Devon?
For Devon we use South West rates. Treat the table as a budget guide, inc VAT; the price you pay is the one on your written quote.
| Item | Guide price | Per |
|---|---|---|
| Crack stitching with stainless helical bars | £80 – £185 | per metre of crack |
| Small jobs (minimum visit)est. | £360 – £515 | per visit |
| Repointing over the stitched line in matching mortarest. | £30 – £60 | per metre |
Repair options we may recommend
Helical bars in cementitious grout
The most common approach. A slot is cut along the bed joint with a twin-blade cutter, flushed out and part filled with a cement-based grout. The helical bar is pushed in, more grout is packed over it, and the joint is pointed to match. The grout cures over a few days.
Best for: Most brick and block walls, including older softer bricks
Helical bars in resin grout
A resin grout bonds quickly and strongly to the bar and masonry and suits wet conditions or work that must take load sooner. It is less forgiving of soft or crumbly bricks, so the choice of grout is made wall by wall rather than as a rule.
Best for: Dense bricks, damp walls and repairs needing a fast cure
Stitching with crack injection
Once the bars are in, the crack itself is filled. Fine cracks are pointed in matching mortar, while wider or deeper cracks can be injected with grout so the void inside the wall is filled rather than just the face. On older houses, lime mortar keeps the repair breathable.
Best for: Deep cracks running through the full thickness of the wall
What to expect when we carry out crack stitching
Confirm the cause has stopped
Before quoting we check what made the wall crack and whether it is still moving. If there is doubt, we suggest a period of monitoring or an engineer’s view, rather than stitching a crack that will simply open again.
Set out the bars
Bar positions are marked across the crack, typically every few courses up its full height, with each bar extending well into sound brickwork on both sides. An engineer’s specification, where there is one, sets the exact spacing and length.
Cut, clean and grout
Slots are cut into the bed joints to the right depth, dust is blown and washed out, and grout is placed. The bars are pressed home and covered, and the crack line is filled or injected.
Is it time for crack stitching? Common signs
- A crack visible on both the inside and outside face of the wall
- Filled cracks that keep reopening along the same line
- A crack you can fit a coin into, running through bricks and mortar
- Stepped cracking beside a window, door or corner
Do you need approval for crack stitching in England?
Like-for-like repairs such as crack stitching and repointing do not usually need building control approval in England, but anything that changes or strengthens the structure, such as underpinning or rebuilding a wall, does. If the work touches a party wall, the Party Wall etc. Act 1996 may apply.
Find crack stitching in your Devon town
Your crack stitching questions
Why do houses in Devon crack?
Devon's ground is mostly older mudstones, sandstones and granite, so shrinkable-clay subsidence is less widespread than further east. Older solid-walled and cob buildings, steep sites and retaining walls are the more common structural concerns. Old metal-mine shafts and workings are recorded in places, so mining searches are routine for some properties. Only an investigation on site can say why a particular building has moved.
How much will crack stitching cost in Devon?
On South West rates, crack stitching starts from about £80 per metre of crack, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
How far apart are helical bars placed?
Helical bars are usually placed every few courses up the full height of the crack, each one running well past the crack into sound brickwork. Spacing and bar length depend on the wall and the crack width, and where an engineer has specified the repair, their drawing sets them.
Can I stitch a crack myself?
It is possible on a small, stable crack, but the work involves cutting into joints with a twin-blade cutter, controlling silica dust and placing the bars correctly. If the crack is part of an insurance claim or is wide, have it assessed first, because a poor repair can hide ongoing movement.
Can crack stitching be done from outside only?
Often yes, especially on cavity walls where only the outer leaf has cracked. On solid walls, or where the crack shows clearly inside, bars may be needed on both faces to reconnect the full thickness. We check both sides before quoting.