Cheshire · England
Bowing wall repairs in Cheshire
Across Cheshire, requests for bowing wall repairs usually begin with a crack someone has noticed getting wider. Cheshire has a mix of ground, with clay in some places and firmer rock in others. A repair only lasts if the reason for the movement has stopped.
Guide price from£960per wall inc VAT
- Area
- Cheshire
- Pricing region
- North West
- Ground
- Clay in parts
- Towns listed
- 13
What is the ground like in Cheshire?
Most of Cheshire is glacial till over Mercia Mudstone. Around Northwich and the Weaver valley, historic salt and brine extraction has caused subsidence in the past, and a separate brine subsidence compensation scheme exists for parts of the county.
Historic brine and salt working has caused ground movement in parts of Cheshire in the past. Housing stock in Cheshire: Brick terraces in Crewe, Northwich and Warrington, Victorian villas in Chester, and inter-war and post-war semis.
Is it time for bowing wall repairs? Common signs
- Internal plaster cracks where a wall meets the ceiling
- Gaps opening between floorboards and the skirting on an outside wall
- Window frames pulling away from the brickwork at the sides
- Horizontal cracking at first-floor or ceiling level
What should you budget for bowing wall repairs in Cheshire?
The ranges below reflect typical North West costs for bowing wall repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Lateral restraint for a typical gable | £960 – £2,900 | per wall |
| Remedial restraint ties installed | £25 – £60 | per tie |
| Partial rebuild of a badly distorted sectionest. | £2,900 – £7,700 | per section |
Repair options we may recommend
Partial rebuild
A section that has bowed beyond safe limits, or where bricks have crushed, is propped, taken down and rebuilt plumb with restraint built in. It is the most disruptive option, so it is kept to the area that genuinely needs it.
Best for: Badly distorted sections that cannot be tied back
Stitching a delaminating wall
Where the layers of a solid wall have separated, long stainless ties are drilled in from the face and bonded into the inner layer to bind the wall together again. This is often combined with restraint ties, so the wall is both reconnected through its thickness and tied back to the structure.
Best for: Solid walls where the outer layer has pulled away
Restraint ties into the floor
Stainless restraint ties are drilled through the wall and fixed into the floor joists or into blocking between them. Where joists run parallel, noggins are fitted across several joists so the tie has something solid to hold. A neat plate or a buried fixing is left on the outside face.
Best for: Walls bowing at floor level where joists run alongside
What to expect when we carry out bowing wall repairs
Decide restrain or rebuild
If the wall is badly out of plumb, has bricks crushing or follows removed internal walls, we recommend an engineer, and can arrange one. Their view sets whether restraint is enough or a section needs rebuilding.
Open up inside
Floorboards or a ceiling strip are lifted along the affected wall to expose the joists. We fit noggins where joists run alongside, and plan furniture moves with you, since this is the most disruptive part of the job.
Close up and make good
Boards are relaid, plaster and outside fixings made good, and cracked joints repointed. You receive a record of the restraint positions, which helps if you sell or if an engineer needs to check the wall again later.
Do you need approval for bowing wall repairs in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Bowing wall repairs near you in Cheshire
- Warrington
- Chester
- Crewe
- Ellesmere Port
- Widnes
- Macclesfield
- Northwich
- Winsford
- Congleton
- Wilmslow
- Sandbach
- Nantwich
- Neston
Your bowing wall repairs questions
Does the ground around Warrington cause cracking?
Most of Cheshire is glacial till over Mercia Mudstone. Around Northwich and the Weaver valley, historic salt and brine extraction has caused subsidence in the past, and a separate brine subsidence compensation scheme exists for parts of the county. Historic brine and salt working has caused ground movement in parts of Cheshire in the past. Only an investigation on site can say why a particular building has moved.
How much will bowing wall repairs cost in Cheshire?
On North West rates, bowing wall repairs starts from about £960 per wall, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Is a bowing wall dangerous?
A bowing wall is not always dangerous, but it should never be ignored. Many have been slightly out of line for decades. A bow that is growing, crushing bricks or appeared after building work is more serious, and an engineer should look at it promptly. Your engineer will confirm.
Do restraint ties show on the outside?
Some do and some do not. Certain ties leave a small round or square plate on the outside face, while others are fully recessed and pointed over. Straps fitted from inside leave no outside trace at all. We agree the finish with you before work starts.
Will I need to move out during bowing wall repairs?
Usually not. Restraint work means lifting some floorboards or a strip of ceiling along one wall, so a room or two is disrupted for a few days. A partial rebuild of an external wall can be more involved, and we will talk it through with you first.