Cheshire · England
Wall tie replacement in Cheshire
Homes in Cheshire are mostly brick terraces in Crewe. That matters for wall tie replacement: footings, wall construction and mortar all vary with the age of the building. Clay soils are found in parts of Cheshire.
Guide price from£1,750per house inc VAT
- Area
- Cheshire
- Pricing region
- North West
- Ground
- Clay in parts
- Towns listed
- 13
What is the ground like in Cheshire?
Most of Cheshire is glacial till over Mercia Mudstone. Around Northwich and the Weaver valley, historic salt and brine extraction has caused subsidence in the past, and a separate brine subsidence compensation scheme exists for parts of the county.
Historic brine and salt working has caused ground movement in parts of Cheshire in the past. What you mostly find across Cheshire: brick terraces in Crewe, Northwich and Warrington, Victorian villas in Chester, and inter-war and post-war semis.
Signs you may need wall tie replacement
- A house built before the 1980s on an exposed or coastal site
- Outer brickwork bowing or bulging, often worst near the top
- Cracked render with a regular horizontal pattern
- Horizontal cracks along mortar joints, repeating every few brick courses
How much will wall tie replacement cost in Cheshire?
For Cheshire we use North West rates. Treat the table as a budget guide, inc VAT; the price you pay is the one on your written quote.
| Item | Guide price | Per |
|---|---|---|
| Mid-terrace houseest. | £1,750 – £3,350 | per house |
| Semi-detached house | £2,400 – £4,800 | per house |
| Detached houseest. | £3,350 – £6,700 | per house |
| Scaffolding where neededest. | £575 – £1,750 | per elevation |
Which repair method suits a home in Cheshire?
Remedial tie installation
New stainless ties are drilled through the outer leaf into the inner leaf, then fixed by mechanical expansion or resin, depending on the masonry. They are placed to a set grid across each elevation, with extra ties around openings and at the edges. Holes are made good in matching mortar.
Best for: Walls where the original ties have failed or are missing
Removing old ties and rebedding
On badly cracked elevations the old ties are cut out from the outer face, the joints raked and rebedded, and the brickwork repointed. It is more work than isolation but removes the source of expansion entirely. An engineer or the survey report usually specifies where this is needed.
Best for: Elevations with severe cracking or lifting
Isolating the old ties
Where the old ties are swelling and cracking the brickwork, fitting new ties alone may not stop further damage. Each old tie can be isolated, usually by cutting it through within the cavity or sleeving its outer end, so it can no longer lift the outer leaf as it continues to corrode.
Best for: Thick mild steel ties still causing horizontal cracking
What happens when we carry out wall tie replacement in Cheshire?
Tie survey
A metal detector locates the existing ties and shows their pattern. Small holes are then drilled at sample points and a borescope passed into the cavity to see the tie condition, type and embedment. The holes are made good afterwards.
Report and quote
You receive a written summary of what the survey found on each elevation, which walls need new ties, whether old ties should be isolated or removed, and a no-obligation written quote with scaffold shown separately.
Deal with the old ties and make good
Old ties are isolated or removed where the report calls for it, cracked joints are raked out and repointed, and drilled holes are filled in matching mortar. A written note of tie positions and findings goes in your property file.
Do you need approval for wall tie replacement in England?
Like-for-like repairs such as crack stitching and repointing do not usually need building control approval in England, but anything that changes or strengthens the structure, such as underpinning or rebuilding a wall, does. If the work touches a party wall, the Party Wall etc. Act 1996 may apply.
Towns in Cheshire we cover for wall tie replacement
- Warrington
- Chester
- Crewe
- Ellesmere Port
- Widnes
- Macclesfield
- Northwich
- Winsford
- Congleton
- Wilmslow
- Sandbach
- Nantwich
- Neston
Wall tie replacement in Cheshire: questions and answers
Is the ground in Cheshire prone to subsidence?
Most of Cheshire is glacial till over Mercia Mudstone. Around Northwich and the Weaver valley, historic salt and brine extraction has caused subsidence in the past, and a separate brine subsidence compensation scheme exists for parts of the county. Historic brine and salt working has caused ground movement in parts of Cheshire in the past. Only an investigation on site can say why a particular building has moved.
How much will wall tie replacement cost in Cheshire?
On North West rates, wall tie replacement starts from about £1,750 per house, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
How do I know if my wall ties have failed?
The clearest sign is horizontal cracking in the mortar joints repeating every few courses, often with a bulge or a lifted roofline. Wire ties can fail with no cracking at all, so a tie survey with a metal detector and borescope is the only reliable check.
Do all walls of the house need new ties?
Not necessarily, because ties often fail on one exposed elevation long before the others. The survey checks each wall, and the quote covers only the elevations where ties have failed or are close to it. Sheltered walls may simply be noted for future checks.
Do the old wall ties have to be removed?
Not always, because thin wire ties that cannot swell are usually left in place once new ties are fitted. Thicker ties that are still expanding and cracking the wall are isolated or removed so they stop causing damage. The survey decides which applies.