Cambridgeshire · England
Wall tie replacement in Cambridgeshire
If you live in Cambridgeshire and are looking at wall tie replacement, the first question is why the wall moved. Much of Cambridgeshire sits on clay that shrinks in dry summers and swells in wet winters; ground movement here is more often linked to soils, drains and trees than to mining.
Guide price from£1,900per house inc VAT
- Area
- Cambridgeshire
- Pricing region
- East of England
- Ground
- Shrinkable clay widespread
- Towns listed
- 8
How do local ground conditions affect wall tie replacement in Cambridgeshire?
Gault Clay underlies much of the Cambridge area and Oxford Clay the west of the county around Peterborough and Huntingdon, while the northern fens are peat and silt that can shrink as they dry. Both clay and peat ground can move with the seasons.
Ground movement here is more often linked to soils, drains and trees than to mining. Housing stock in Cambridgeshire: Victorian terraces in Cambridge and Peterborough, fen-edge cottages, and extensive post-war and new-build estates.
What to look for before calling about wall tie replacement
- Horizontal cracks along mortar joints, repeating every few brick courses
- A house built before the 1980s on an exposed or coastal site
- Outer brickwork bowing or bulging, often worst near the top
- Mortar joints that look wider or opened up on one elevation
Wall tie replacement prices in Cambridgeshire
Guide prices below are for homes in Cambridgeshire, on East of England rates and including VAT. A survey or good photos let us turn them into a fixed written price.
| Item | Guide price | Per |
|---|---|---|
| Mid-terrace houseest. | £1,900 – £3,700 | per house |
| Semi-detached house | £2,600 – £5,250 | per house |
| Detached houseest. | £3,700 – £7,350 | per house |
| Scaffolding where neededest. | £630 – £1,900 | per elevation |
How we usually approach wall tie replacement
Isolating the old ties
Where the old ties are swelling and cracking the brickwork, fitting new ties alone may not stop further damage. Each old tie can be isolated, usually by cutting it through within the cavity or sleeving its outer end, so it can no longer lift the outer leaf as it continues to corrode.
Best for: Thick mild steel ties still causing horizontal cracking
Removing old ties and rebedding
On badly cracked elevations the old ties are cut out from the outer face, the joints raked and rebedded, and the brickwork repointed. It is more work than isolation but removes the source of expansion entirely. An engineer or the survey report usually specifies where this is needed.
Best for: Elevations with severe cracking or lifting
Partial rebuild of the outer leaf
If a section of the outer leaf has bulged too far to be tied back, it is carefully taken down and rebuilt with new ties built in as the work goes up. This is uncommon, and is usually limited to a gable top, a parapet or a panel under a window.
Best for: Outer leaf too distorted to tie back safely
What happens during wall tie replacement, step by step?
Tie survey
A metal detector locates the existing ties and shows their pattern. Small holes are then drilled at sample points and a borescope passed into the cavity to see the tie condition, type and embedment. The holes are made good afterwards.
Access
Ties are fitted across the whole of each affected elevation, so scaffold or a tower is usually needed above ground floor. We plan access around conservatories, extensions, neighbours’ land and any parking that must be suspended.
Install the new ties
New stainless ties are drilled and fixed to the specified grid, with closer spacing around windows, doors and the roofline. Sample ties can be pull-tested to confirm they are holding in your particular brick and block.
Do you need approval for wall tie replacement in England?
Like-for-like repairs such as crack stitching and repointing do not usually need building control approval in England, but anything that changes or strengthens the structure, such as underpinning or rebuilding a wall, does. If the work touches a party wall, the Party Wall etc. Act 1996 may apply.
Towns in Cambridgeshire we cover for wall tie replacement
Questions about wall tie replacement in Cambridgeshire
Is the ground in Cambridgeshire prone to subsidence?
Gault Clay underlies much of the Cambridge area and Oxford Clay the west of the county around Peterborough and Huntingdon, while the northern fens are peat and silt that can shrink as they dry. Both clay and peat ground can move with the seasons. Ground movement here is more often linked to soils, drains and trees than to mining. Only an investigation on site can say why a particular building has moved.
How much will wall tie replacement cost in Cambridgeshire?
On East of England rates, wall tie replacement starts from about £1,900 per house, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Do the old wall ties have to be removed?
Not always, because thin wire ties that cannot swell are usually left in place once new ties are fitted. Thicker ties that are still expanding and cracking the wall are isolated or removed so they stop causing damage. The survey decides which applies.
Which houses are most at risk of wall tie failure?
Cavity-walled houses built before the 1980s are most at risk, especially those with mild steel ties, black ash mortar or an exposed position. Coastal and hilltop houses, and elevations facing the prevailing weather, tend to fail first.
Will a mortgage lender accept wall tie replacement?
Lenders generally accept properly carried out tie replacement, but they may want to see the survey, the quote or a record of the completed work. If a valuation has flagged wall ties, a written report and itemised quote are usually what the lender or buyer needs next.