Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Taunton · Somerset

Underpinning in Taunton

The ground under Taunton and the wider Somerset decides how deep an underpinning scheme has to go. Where firm ground lies close to the surface, mass concrete is usually the practical choice, while deeper soft ground often points to mini-piles.

Guide price from£1,050per metre of wall inc VAT

Underpinning bay excavated beneath a brick house footing with fresh concrete placed
Postcodes
TA1
Population
about 65,000
Area
Somerset
Pricing region
South West

What should you know about the ground under Taunton?

Postcode districts TA1 cover Taunton, a Somerset town of about 65,000 people. We also take enquiries from nearby Bridgwater (9 miles), Burnham-on-Sea (16 miles) and Tiverton (19 miles).

Somerset has a mix of ground, with clay in some places and firmer rock in others. Parts of Somerset lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Housing stock in Somerset: Bath stone Georgian terraces, Victorian houses in Taunton and Weston-super-Mare, and post-war estates.

Signs you may need underpinning

  • Movement continuing through more than one winter of monitoring
  • Floors sloping noticeably towards one external wall
  • Cracks that keep widening after the drains have been repaired

How much will underpinning cost in Taunton?

The ranges below reflect typical South West costs for underpinning, including VAT. Scaffold, access and making good can push a job to the top of the range.

Guide prices inc VAT on South West rates. Items marked est. are our estimates.
ItemGuide pricePer
Mass-concrete underpinning£1,050 – £1,550per metre of wall
Beam-and-base underpinning£1,550 – £2,600per metre of wall
Mini-piled underpinning£2,050 – £3,600per metre of wall
Engineer's design and building control feesest.£825 – £2,600per scheme

Which repair method suits a home in Taunton?

Mass concrete underpinning

The traditional method. Short sections under the wall are dug out in a set sequence, usually about a metre at a time, and filled with concrete before the next section is opened. It suits moderate depths and good access, and it needs little specialist plant.

Best for: Shallow failures on firm ground found at moderate depth

Beam-and-base underpinning

A reinforced concrete beam is cast beneath or alongside the existing footing and carries the wall onto mass concrete bases at intervals. It spreads load well across variable ground and can mean less digging than continuous underpinning along the whole wall.

Best for: Longer runs of wall or heavier loads over variable ground

What happens when we carry out underpinning in Taunton?

  1. Engineer’s investigation

    An independent chartered structural engineer studies the monitoring results, trial pits and soil tests, then decides whether underpinning is needed and which method suits. We can arrange the engineer if you do not already have one.

  2. Design and approvals

    The engineer produces drawings and calculations. We make the building control or building warrant application, and party wall notices are served where the law requires them, before any digging starts.

  3. Excavation and concrete

    Work runs in the sequence the engineer sets so the wall is never left unsupported over a long length. Building control inspects the excavations before concrete goes in, and each section is dry-packed tight to the footing above.

Rules for underpinning in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Underpinning in Taunton: questions and answers

How much should I budget for underpinning in Taunton?

Guide prices for underpinning in Taunton start from about £1,050 per metre of wall, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Can you survey a property in Taunton?

We do. Taunton and the surrounding area are covered, including nearby Bridgwater and Burnham-on-Sea. A free initial assessment from your photos is the first step.

Why do houses in Somerset crack?

Somerset mixes Lias clays, Mercia Mudstone, limestone hills and the peat and alluvium of the Levels around Bridgwater, which can settle. The former Somerset coalfield around Radstock and Midsomer Norton left recorded workings. Only an investigation can say why a particular building has moved.

Do I need to tell my neighbours about underpinning?

In England and Wales you usually do. Underpinning a party wall normally needs two months’ notice, and excavating near a neighbour’s foundations needs one month’s notice under the Party Wall etc. Act 1996. Scotland and Northern Ireland have no equivalent Act, but agreeing the work in writing still helps.

Can you underpin only part of a house?

Yes, partial underpinning of one corner or one wall is common, though the engineer must think about the junction with the unstrengthened part. A sudden change in foundation depth can cause new cracking, so the scheme may step down gradually or include a movement joint.

Related work in Taunton

Underpinning near Taunton

For a no-obligation written quote on underpinning in Taunton, send photos of the cracking and any engineer’s report you already hold.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote