Somerset · England
Underpinning in Somerset
Looking for underpinning in Somerset? Send us photos for a free initial view. Clay soils are found in parts of Somerset, so we look at the ground, drains and nearby trees before recommending anything.
Guide price from£1,050per metre of wall inc VAT
- Area
- Somerset
- Pricing region
- South West
- Ground
- Clay in parts
- Towns listed
- 11
What is the ground like in Somerset?
Somerset mixes Lias clays, Mercia Mudstone, limestone hills and the peat and alluvium of the Levels around Bridgwater, which can settle. The former Somerset coalfield around Radstock and Midsomer Norton left recorded workings.
Parts of Somerset lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. What you mostly find across Somerset: Bath stone Georgian terraces, Victorian houses in Taunton and Weston-super-Mare, and post-war estates.
How we usually approach underpinning
Mini-piled underpinning
Small-diameter piles are driven or bored down to firm ground and linked by a reinforced beam or needles that pick up the wall. Compact rigs fit through narrow access, and the method reaches depths that would be impractical to excavate by hand.
Best for: Deep soft ground, tree roots, or restricted access
Mass concrete underpinning
The traditional method. Short sections under the wall are dug out in a set sequence, usually about a metre at a time, and filled with concrete before the next section is opened. It suits moderate depths and good access, and it needs little specialist plant.
Best for: Shallow failures on firm ground found at moderate depth
Beam-and-base underpinning
A reinforced concrete beam is cast beneath or alongside the existing footing and carries the wall onto mass concrete bases at intervals. It spreads load well across variable ground and can mean less digging than continuous underpinning along the whole wall.
Best for: Longer runs of wall or heavier loads over variable ground
What happens during underpinning, step by step?
Design and approvals
The engineer produces drawings and calculations. We make the building control or building warrant application, and party wall notices are served where the law requires them, before any digging starts.
Excavation and concrete
Work runs in the sequence the engineer sets so the wall is never left unsupported over a long length. Building control inspects the excavations before concrete goes in, and each section is dry-packed tight to the footing above.
Crack repairs and handover
Once the new foundation has cured, cracks are stitched and repointed, inside walls are made good, and paths or patios disturbed by the dig are reinstated. You receive the building control completion paperwork for your records.
What to look for before calling about underpinning
- Movement continuing through more than one winter of monitoring
- One corner of the house visibly lower than the others
- Floors sloping noticeably towards one external wall
- Cracks that keep widening after the drains have been repaired
Underpinning prices in Somerset
For Somerset we use South West rates. Treat the table as a budget guide, inc VAT; the price you pay is the one on your written quote.
| Item | Guide price | Per |
|---|---|---|
| Mass-concrete underpinning | £1,050 – £1,550 | per metre of wall |
| Beam-and-base underpinning | £1,550 – £2,600 | per metre of wall |
| Mini-piled underpinning | £2,050 – £3,600 | per metre of wall |
| Engineer's design and building control feesest. | £825 – £2,600 | per scheme |
Do you need approval for underpinning in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Find underpinning in your Somerset town
Questions about underpinning in Somerset
Why do houses in Somerset crack?
Somerset mixes Lias clays, Mercia Mudstone, limestone hills and the peat and alluvium of the Levels around Bridgwater, which can settle. The former Somerset coalfield around Radstock and Midsomer Norton left recorded workings. Parts of Somerset lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Only an investigation on site can say why a particular building has moved.
How much will underpinning cost in Somerset?
On South West rates, underpinning starts from about £1,050 per metre of wall, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Will underpinning affect selling my house?
It needs explaining to buyers, but a properly documented scheme is far better than unresolved movement. Keep the engineer’s design, the building control completion certificate and any insurance paperwork. Lenders and surveyors will usually ask for these before agreeing a sale.
Which underpinning method is best?
The right method depends on how deep firm ground lies, the load on the wall and the access. Mass concrete suits moderate depths, beam-and-base spreads heavier loads, and mini-piles reach deep soft ground or work through tight access. The engineer chooses the method from the site investigation.
Can you underpin only part of a house?
Yes, partial underpinning of one corner or one wall is common, though the engineer must think about the junction with the unstrengthened part. A sudden change in foundation depth can cause new cracking, so the scheme may step down gradually or include a movement joint.