Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Taunton · Somerset

Chimney stack repairs in Taunton

Before repairing a stack at a Taunton property, we ask what lies beneath it. If a chimney breast has been removed inside, the support for the stack above needs checking by an engineer before any work on the roof.

Guide price from£515per stack inc VAT

Brick chimney stack being rebuilt with new flaunching on a slate roof
Postcodes
TA1
Population
about 65,000
Area
Somerset
Pricing region
South West

What is the ground like in Somerset?

Taunton is in Somerset and takes in postcode districts TA1. About 65,000 people live there. If you are just outside Taunton, we also cover Bridgwater (9 miles), Burnham-on-Sea (16 miles) and Tiverton (19 miles).

Parts of Somerset have clay that can shrink near trees in dry spells. Parts of Somerset lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Typical buildings in Somerset: Bath stone Georgian terraces, Victorian houses in Taunton and Weston-super-Mare, and post-war estates.

Symptoms that point to chimney stack repairs

  • A stack visibly leaning when you look along the roof ridge
  • Mortar washed out of joints, leaving bricks standing proud
  • Bits of brick, mortar or render landing in the garden or gutter

Guide prices for chimney stack repairs in Taunton

The ranges below reflect typical South West costs for chimney stack repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.

Guide prices inc VAT on South West rates. Items marked est. are our estimates.
ItemGuide pricePer
Repointing, flaunching and minor brick repairs£515 – £2,050per stack
Partial or full stack rebuild£3,100 – £10,300per stack
Stack restraint or strappingest.£410 – £1,250per stack

Methods for chimney stack repairs

Flaunching and pot resetting

Old cracked flaunching is broken out, pots are lifted and reset or replaced, and new flaunching is formed to a fall so water runs off. Unused flues can be capped with ventilated caps, which keeps rain out while letting the flue breathe.

Best for: Loose pots and cracked mortar at the top of the stack

Repointing and brick repairs

Eroded joints are raked out and repointed in a mortar suited to the brick, often a lime-based mix on older stacks. Spalled or cracked bricks are cut out and replaced with matched reclaimed or new bricks. On many stacks this, with new flaunching, is all that is needed.

Best for: Upright stacks with weathered joints and some damaged bricks

From first photo to finished repair

  1. Check what is below

    We ask whether any chimney breasts have been removed, and check the loft and rooms below for cracking. If a breast has gone without proper support, we recommend an independent chartered structural engineer before any stack work.

  2. Scaffold to the stack

    Safe access is set up with a working platform around the stack. On terraces we may need to agree access over a neighbour’s roof, and a council licence is arranged where the scaffold stands on the pavement.

  3. Weatherproof and clear

    Caps or cowls are fitted where agreed, the roof around the stack is checked for slipped tiles, and debris is cleared from gutters. You receive photos of the finished stack taken from the scaffold, since it is hard to see from the ground.

Rules for chimney stack repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Frequently asked questions

How much should I budget for chimney stack repairs in Taunton?

Guide prices for chimney stack repairs in Taunton start from about £515 per stack, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Can you survey a property in Taunton?

Yes, Taunton is covered, along with postcode districts TA1. We also cover nearby Bridgwater and Burnham-on-Sea.

Why do houses in Somerset crack?

Somerset mixes Lias clays, Mercia Mudstone, limestone hills and the peat and alluvium of the Levels around Bridgwater, which can settle. The former Somerset coalfield around Radstock and Midsomer Norton left recorded workings. Only an investigation can say why a particular building has moved.

Is a leaning chimney dangerous?

A leaning chimney can become dangerous, because stacks are heavy and stand high above the roof. A slight, long-standing lean may be stable for now, but a lean that is worsening, or loose bricks and pots, should be looked at quickly. Keep people away from below if anything looks loose.

Why is my chimney stack leaning?

Most leaning stacks are caused by sulphate attack, where chemicals from old flue gases make the mortar expand more on the wetter side, so the stack bends away from the weather. Frost damage and failed pointing can make it worse. A recently leaning stack can also signal problems below.

Related work in Taunton

Chimney stack repairs near Taunton

Each part of a Taunton chimney job, scaffold included, is itemised in our no-obligation written quote so you can see where the cost lies.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote