Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Bath · Somerset

Underpinning in Bath

If an engineer has recommended underpinning for your Bath home, we can price the scheme from their drawings and calculations. You receive a fixed price in writing that covers the method, the length of wall, access and the making good afterwards.

Guide price from£1,050per metre of wall inc VAT

Underpinning bay excavated beneath a brick house footing with fresh concrete placed
Postcodes
BA1, BA2
Population
about 100,000
Area
Somerset
Pricing region
South West

How do local ground conditions affect underpinning in Bath?

We cover Bath and its postcode districts BA1, BA2, part of Somerset, with a population of roughly 100,000. If you are just outside Bath, we also cover Keynsham (6 miles), Trowbridge (8 miles) and Kingswood (8 miles).

Parts of Somerset have clay that can shrink near trees in dry spells. Parts of Somerset lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. What you mostly find across Somerset: Bath stone Georgian terraces, Victorian houses in Taunton and Weston-super-Mare, and post-war estates.

What to look for before calling about underpinning

  • Footings found to be very shallow during a trial pit
  • Cracks that keep widening after the drains have been repaired
  • Movement continuing through more than one winter of monitoring

Underpinning prices in Bath

Guide prices below are for homes in Bath, on South West rates and including VAT. A survey or good photos let us turn them into a fixed written price.

Guide prices inc VAT on South West rates. Items marked est. are our estimates.
ItemGuide pricePer
Mass-concrete underpinning£1,050 – £1,550per metre of wall
Beam-and-base underpinning£1,550 – £2,600per metre of wall
Mini-piled underpinning£2,050 – £3,600per metre of wall
Engineer's design and building control feesest.£825 – £2,600per scheme

How we usually approach underpinning

Beam-and-base underpinning

A reinforced concrete beam is cast beneath or alongside the existing footing and carries the wall onto mass concrete bases at intervals. It spreads load well across variable ground and can mean less digging than continuous underpinning along the whole wall.

Best for: Longer runs of wall or heavier loads over variable ground

Mini-piled underpinning

Small-diameter piles are driven or bored down to firm ground and linked by a reinforced beam or needles that pick up the wall. Compact rigs fit through narrow access, and the method reaches depths that would be impractical to excavate by hand.

Best for: Deep soft ground, tree roots, or restricted access

What happens during underpinning, step by step?

  1. Engineer’s investigation

    An independent chartered structural engineer studies the monitoring results, trial pits and soil tests, then decides whether underpinning is needed and which method suits. We can arrange the engineer if you do not already have one.

  2. Fixed written price

    With the design in hand we confirm a fixed price in writing, setting out the method, the length of wall, access arrangements and the making good. For insurance work we can price to the loss adjuster’s or engineer’s schedule.

  3. Excavation and concrete

    Work runs in the sequence the engineer sets so the wall is never left unsupported over a long length. Building control inspects the excavations before concrete goes in, and each section is dry-packed tight to the footing above.

Rules for underpinning in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Questions about underpinning in Bath

How much will underpinning cost in Bath?

Guide prices for underpinning in Bath start from about £1,050 per metre of wall, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you cover Bath?

Yes. We take enquiries from across Bath, including BA1, BA2, and from nearby places such as Keynsham and Trowbridge. Send photos for a free initial view and we will tell you what happens next.

Is the ground in Somerset prone to subsidence?

Somerset mixes Lias clays, Mercia Mudstone, limestone hills and the peat and alluvium of the Levels around Bridgwater, which can settle. The former Somerset coalfield around Radstock and Midsomer Norton left recorded workings. Only an investigation can say why a particular building has moved.

Does my house really need underpinning?

Often not, because most subsidence is fixed by repairing drains or managing trees and then repairing the cracks. Underpinning is justified when monitoring shows movement continuing after the cause has been dealt with, or when the ground itself is unsuitable. An independent engineer should make that call.

Will underpinning affect selling my house?

It needs explaining to buyers, but a properly documented scheme is far better than unresolved movement. Keep the engineer’s design, the building control completion certificate and any insurance paperwork. Lenders and surveyors will usually ask for these before agreeing a sale.

Other structural repairs in Bath

Underpinning near Bath

For a no-obligation written quote on underpinning in Bath, send photos of the cracking and any engineer’s report you already hold.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote