Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Bedworth · Warwickshire

Roof structure repairs in Bedworth

Many older roofs, in Bedworth and across Warwickshire alike, were built with slim purlins and few ties. A little historic movement is normal, so we check whether the roof is still moving before recommending how far the strengthening needs to go.

Guide price from£300per rafter inc VAT

New timber purlin and struts strengthening the rafters in a loft
Postcodes
CV12
Population
about 31,000
Area
Warwickshire
Pricing region
West Midlands

Is Warwickshire prone to ground movement?

With roughly 31,000 people, Bedworth spans postcode districts CV12 in Warwickshire. Neighbouring towns we cover: Nuneaton (3 miles), Coventry (5 miles) and Hinckley (6 miles).

Warwickshire has a mix of ground, with clay in some places and firmer rock in others. Parts of Warwickshire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Typical buildings in Warwickshire: Regency houses in Leamington Spa, timber-framed buildings in Stratford and Warwick, and brick terraces and estates in the north.

What to look for before calling about roof structure repairs

  • Horizontal cracks in the wall just below the eaves or ceiling line
  • Ridge line dipping in the middle when seen from the street
  • Struts, collars or ties cut out or missing in the loft

Roof structure repairs prices in Bedworth

Prices in Bedworth are worked out on West Midlands rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.

Guide prices inc VAT on West Midlands rates. Items marked est. are our estimates.
ItemGuide pricePer
Repairing or doubling a rafter£300 – £600per rafter
Purlin and strut strengthening£1,200 – £3,000per roof
Tying in roof spread (straps and ties)est.£800 – £2,500per roof

How we usually approach roof structure repairs

Tying in roof spread

New ties, collars or steel straps connect opposite rafters, or fix the rafter feet and wall plate firmly to the ceiling joists, so the outward thrust is resisted. Leaning wall heads are strapped back to the roof, and a badly spread roof may need partly rebuilding first.

Best for: Walls pushed out at eaves level by spreading rafters

Repairing or doubling rafters

Cracked, sagging or rotten rafters are strengthened by fixing a new timber alongside, often called doubling, and rotten rafter feet are cut back and spliced. The work is usually done from inside the loft with the tiles left in place, unless the covering is coming off anyway.

Best for: Individual rafters that have cracked, sagged or rotted at the feet

What happens during roof structure repairs, step by step?

  1. Send photos

    Photograph the roof from across the street, both slopes if you can, and the loft timbers with a torch. Include the eaves and any cracks just below them. From these we can usually tell sag from spread and whether an engineer is needed.

  2. Written quote

    You receive a no-obligation written quote listing each timber repair, any ties or straps, propping, scaffolding and making good. Once the repair is specified, the figure becomes a fixed price in writing.

  3. Prop, strengthen and tie

    The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.

Rules for roof structure repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Questions about roof structure repairs in Bedworth

How much will roof structure repairs cost in Bedworth?

Guide prices for roof structure repairs in Bedworth start from about £300 per rafter, including VAT, on West Midlands rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you cover Bedworth?

Yes, Bedworth is covered, along with postcode districts CV12. We also cover nearby Nuneaton and Coventry.

Is the ground in Warwickshire prone to subsidence?

Much of Warwickshire is Mercia Mudstone and Lias clay, with the Warwickshire coalfield under Nuneaton and Bedworth in the north. Clay soils near trees can shrink in dry summers. Only an investigation can say why a particular building has moved.

Do I need a structural engineer for roof repairs?

For like-for-like repairs to a few rafters, often not. Where purlins, struts or ties are being redesigned, the covering is getting heavier or the walls are being pushed out, you usually do. Where the repair needs an engineer’s design or sign-off, an independent chartered structural engineer is appointed, and we can arrange this.

Do roof structure repairs need building control?

Usually yes, where the structure is strengthened or altered, or the covering becomes significantly heavier. In England and Wales that falls under Part A, in Scotland it generally needs a building warrant, and in Northern Ireland council building control approves it. We deal with building control where the work needs it.

Other structural repairs in Bedworth

Roof structure repairs near Bedworth

For a guide price on roof structure repairs in Bedworth, try the quote tool or send photos of the ridge, the loft and the eaves.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote