Skelmersdale · Lancashire
Roof structure repairs in Skelmersdale
If the top of a wall at your Skelmersdale property seems to lean out at the eaves, the roof may be spreading. Ties, collars and straps can usually hold it back, sometimes with an engineer’s design for the new load path.
Guide price from£290per rafter inc VAT
- Postcodes
- WN8
- Population
- about 39,000
- Area
- Lancashire
- Pricing region
- North West
Why does the ground in Lancashire matter for roof structure repairs?
We cover Skelmersdale and its postcode districts WN8, part of Lancashire, with a population of roughly 39,000. If you are just outside Skelmersdale, we also cover Ormskirk (5 miles), Wigan (6 miles) and Kirkby (7 miles).
Lancashire has a mix of ground, with clay in some places and firmer rock in others. Parts of Lancashire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Typical buildings in Lancashire: Stone and brick mill terraces, seaside villas in Blackpool and Lytham, and inter-war and post-war semis.
How much will roof structure repairs cost in Skelmersdale?
For Skelmersdale we use North West rates. Treat the table as a budget guide, inc VAT; the price you pay is the one on your written quote.
| Item | Guide price | Per |
|---|---|---|
| Repairing or doubling a rafter | £290 – £575 | per rafter |
| Purlin and strut strengthening | £1,150 – £2,900 | per roof |
| Tying in roof spread (straps and ties)est. | £770 – £2,400 | per roof |
Which repair method suits a home in Skelmersdale?
Purlin and strut strengthening
Undersized purlins are strengthened with extra timber or replaced, and new struts are taken down to a load-bearing wall. Where there is no suitable wall, an engineer designs the load path. Temporary props hold the roof while members are changed.
Best for: Sagging slopes, slim purlins and struts removed from the loft
Wall plate replacement
Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.
Best for: Rot along the eaves where rafters bear on the wall
What happens when we carry out roof structure repairs in Skelmersdale?
Send photos
Photograph the roof from across the street, both slopes if you can, and the loft timbers with a torch. Include the eaves and any cracks just below them. From these we can usually tell sag from spread and whether an engineer is needed.
Loft and outside survey
On site we check rafter sizes and spacing, purlins, struts, ties and wall plates, look for rot and past alterations, and measure any lean at the wall head. The covering is noted too, because its weight affects the repair.
Prop, strengthen and tie
The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.
Signs you may need roof structure repairs
- Daylight through the tiles, or timber that is damp, stained or crumbling
- Struts, collars or ties cut out or missing in the loft
- Roof slope looking hollow or wavy between the ridge and the gutter
Rules for roof structure repairs in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Roof structure repairs in Skelmersdale: questions and answers
How much should I budget for roof structure repairs in Skelmersdale?
Guide prices for roof structure repairs in Skelmersdale start from about £290 per rafter, including VAT, on North West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Can you survey a property in Skelmersdale?
Yes, Skelmersdale is covered, along with postcode districts WN8. We also cover nearby Ormskirk and Wigan.
Why do houses in Lancashire crack?
Lancashire is mostly glacial till over sandstone and mudstone, with the Burnley and Accrington coalfield in the east and soft coastal and estuarine ground on the Fylde. Old mill and mine sites leave made ground in many towns. Only an investigation can say why a particular building has moved.
Can heavy concrete tiles damage a roof?
Yes, if the frame was designed for lighter slate or tiles and was not strengthened. The extra weight makes rafters and purlins sag and can bring on roof spread. Before re-roofing in a heavier material, have the structure checked and notify building control.
Do roof structure repairs need building control?
Usually yes, where the structure is strengthened or altered, or the covering becomes significantly heavier. In England and Wales that falls under Part A, in Scotland it generally needs a building warrant, and in Northern Ireland council building control approves it. We deal with building control where the work needs it.
Related work in Skelmersdale
Roof structure repairs near Skelmersdale
If struts were removed for a loft room in Skelmersdale, send photos of the space and we will price putting a proper load path back.