Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Stroud · Gloucestershire

Roof structure repairs in Stroud

A dipping ridge or a wavy roof slope in Stroud is usually a timber problem, not a tile problem. We look at the rafters, purlins, struts and ties from the loft, and at the wall heads from outside, before suggesting how to strengthen it.

Guide price from£310per rafter inc VAT

New timber purlin and struts strengthening the rafters in a loft
Postcodes
GL5, GL6
Population
about 60,000
Area
Gloucestershire
Pricing region
South West

How do local ground conditions affect roof structure repairs in Stroud?

Stroud, Gloucestershire: about 60,000 residents across postcode districts GL5, GL6. Neighbouring towns we cover: Gloucester (8 miles), Cirencester (10 miles) and Cheltenham (12 miles).

Gloucestershire has a mix of ground, with clay in some places and firmer rock in others. Parts of Gloucestershire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Across Gloucestershire, most homes are Cotswold stone cottages, Regency terraces in Cheltenham, and brick estates around Gloucester.

Signs you may need roof structure repairs

  • Horizontal cracks in the wall just below the eaves or ceiling line
  • Roof slope looking hollow or wavy between the ridge and the gutter
  • Struts, collars or ties cut out or missing in the loft

How much will roof structure repairs cost in Stroud?

Prices in Stroud are worked out on South West rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.

Guide prices inc VAT on South West rates. Items marked est. are our estimates.
ItemGuide pricePer
Repairing or doubling a rafter£310 – £620per rafter
Purlin and strut strengthening£1,250 – £3,100per roof
Tying in roof spread (straps and ties)est.£825 – £2,600per roof

Which repair method suits a home in Stroud?

Wall plate replacement

Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.

Best for: Rot along the eaves where rafters bear on the wall

Purlin and strut strengthening

Undersized purlins are strengthened with extra timber or replaced, and new struts are taken down to a load-bearing wall. Where there is no suitable wall, an engineer designs the load path. Temporary props hold the roof while members are changed.

Best for: Sagging slopes, slim purlins and struts removed from the loft

What happens when we carry out roof structure repairs in Stroud?

  1. Send photos

    Photograph the roof from across the street, both slopes if you can, and the loft timbers with a torch. Include the eaves and any cracks just below them. From these we can usually tell sag from spread and whether an engineer is needed.

  2. Engineer’s design where needed

    Where purlins, struts or ties must be redesigned, or the roof carries a heavier covering, an independent chartered structural engineer is appointed to specify the work. We can arrange this, and their design sets the sizes and fixings.

  3. Prop, strengthen and tie

    The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.

Rules for roof structure repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Roof structure repairs in Stroud: questions and answers

How much will roof structure repairs cost in Stroud?

Guide prices for roof structure repairs in Stroud start from about £310 per rafter, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you cover Stroud?

Yes, Stroud is covered, along with postcode districts GL5, GL6. We also cover nearby Gloucester and Cirencester.

Is the ground in Gloucestershire prone to subsidence?

The Severn vale around Gloucester, Cheltenham and Tewkesbury is Lias and Mercia Mudstone clay, the Cotswolds are limestone, and the Forest of Dean has a historic coalfield. Parts of South Gloucestershire around Kingswood also lie on old Coal Measures. Only an investigation can say why a particular building has moved.

Is a sagging roof ridge dangerous?

A slight, even dip in an old roof is often historic movement that stopped long ago. A sag that is getting worse, cracking timbers, walls pushing out at the eaves or recently removed struts should be checked soon. Avoid storing heavy items in the loft until then.

Can heavy concrete tiles damage a roof?

Yes, if the frame was designed for lighter slate or tiles and was not strengthened. The extra weight makes rafters and purlins sag and can bring on roof spread. Before re-roofing in a heavier material, have the structure checked and notify building control.

Other structural repairs in Stroud

Roof structure repairs near Stroud

Send photos of the roof from the street and the loft timbers at your Stroud property for a free initial assessment and a no-obligation written quote.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote