Yate · Gloucestershire
Roof structure repairs in Yate
Before buying or re-roofing a house in Yate, it is worth knowing whether the frame can carry its covering. Send photos of the loft and the ridge, and we will tell you whether the timbers look adequate or need strengthening.
Guide price from£310per rafter inc VAT
- Postcodes
- BS37
- Population
- about 24,000
- Area
- Gloucestershire
- Pricing region
- South West
Why does the ground in Gloucestershire matter for roof structure repairs?
Yate (BS37) has around 24,000 residents and sits in Gloucestershire. Nearby places we cover include Kingswood (7 miles), Keynsham (9 miles) and Bath (12 miles).
Parts of Gloucestershire have clay that can shrink near trees in dry spells. Parts of Gloucestershire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Across Gloucestershire, most homes are Cotswold stone cottages, Regency terraces in Cheltenham, and brick estates around Gloucester.
Guide prices for roof structure repairs in Yate
For Yate we use South West rates. Treat the table as a budget guide, inc VAT; the price you pay is the one on your written quote.
| Item | Guide price | Per |
|---|---|---|
| Repairing or doubling a rafter | £310 – £620 | per rafter |
| Purlin and strut strengthening | £1,250 – £3,100 | per roof |
| Tying in roof spread (straps and ties)est. | £825 – £2,600 | per roof |
Methods for roof structure repairs
Purlin and strut strengthening
Undersized purlins are strengthened with extra timber or replaced, and new struts are taken down to a load-bearing wall. Where there is no suitable wall, an engineer designs the load path. Temporary props hold the roof while members are changed.
Best for: Sagging slopes, slim purlins and struts removed from the loft
Repairing or doubling rafters
Cracked, sagging or rotten rafters are strengthened by fixing a new timber alongside, often called doubling, and rotten rafter feet are cut back and spliced. The work is usually done from inside the loft with the tiles left in place, unless the covering is coming off anyway.
Best for: Individual rafters that have cracked, sagged or rotted at the feet
From first photo to finished repair
Send photos
Photograph the roof from across the street, both slopes if you can, and the loft timbers with a torch. Include the eaves and any cracks just below them. From these we can usually tell sag from spread and whether an engineer is needed.
Engineer’s design where needed
Where purlins, struts or ties must be redesigned, or the roof carries a heavier covering, an independent chartered structural engineer is appointed to specify the work. We can arrange this, and their design sets the sizes and fixings.
Prop, strengthen and tie
The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.
Symptoms that point to roof structure repairs
- Horizontal cracks in the wall just below the eaves or ceiling line
- Top of an outside wall leaning out at eaves level
- Ridge line dipping in the middle when seen from the street
Rules for roof structure repairs in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Frequently asked questions
How much should I budget for roof structure repairs in Yate?
Guide prices for roof structure repairs in Yate start from about £310 per rafter, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Can you survey a property in Yate?
Yes. We take enquiries from across Yate, including BS37, and from nearby places such as Kingswood and Keynsham. Send photos for a free initial view and we will tell you what happens next.
Why do houses in Gloucestershire crack?
The Severn vale around Gloucester, Cheltenham and Tewkesbury is Lias and Mercia Mudstone clay, the Cotswolds are limestone, and the Forest of Dean has a historic coalfield. Parts of South Gloucestershire around Kingswood also lie on old Coal Measures. Only an investigation can say why a particular building has moved.
Do I need a structural engineer for roof repairs?
For like-for-like repairs to a few rafters, often not. Where purlins, struts or ties are being redesigned, the covering is getting heavier or the walls are being pushed out, you usually do. Where the repair needs an engineer’s design or sign-off, an independent chartered structural engineer is appointed, and we can arrange this.
Can heavy concrete tiles damage a roof?
Yes, if the frame was designed for lighter slate or tiles and was not strengthened. The extra weight makes rafters and purlins sag and can bring on roof spread. Before re-roofing in a heavier material, have the structure checked and notify building control.
Related work in Yate
- Lintel replacement
- Resin injection ground stabilisation
- Mining subsidence repairs
- Boundary and garden wall repairs
- Chimney stack repairs
Roof structure repairs near Yate
For a guide price on roof structure repairs in Yate, try the quote tool or send photos of the ridge, the loft and the eaves.