Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Taunton · Somerset

Extension pulling away repairs in Taunton

If the corner joint in your Taunton extension keeps splitting after you fill it, something is still moving. Measuring the gap over a few months, with dated photos, gives an engineer the evidence to recommend the right repair.

Guide price from£620per junction inc VAT

Rear brick extension with a tapered crack at the joint with the house
Postcodes
TA1
Population
about 65,000
Area
Somerset
Pricing region
South West

What should you know about the ground under Taunton?

Taunton, Somerset: about 65,000 residents across postcode districts TA1. Nearby, we also cover Bridgwater (9 miles), Burnham-on-Sea (16 miles) and Tiverton (19 miles).

Somerset has a mix of ground, with clay in some places and firmer rock in others. Parts of Somerset lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. What you mostly find across Somerset: Bath stone Georgian terraces, Victorian houses in Taunton and Weston-super-Mare, and post-war estates.

What to look for before calling about extension pulling away repairs

  • Floor level dropping where the extension and house floors meet
  • A vertical crack or gap where the extension meets the house
  • Daylight or draughts showing through the internal corner joint

Extension pulling away repairs prices in Taunton

For Taunton we use South West rates. Treat the table as a budget guide, inc VAT; the price you pay is the one on your written quote.

Guide prices inc VAT on South West rates. Items marked est. are our estimates.
ItemGuide pricePer
Junction crack repair with stainless tiesest.£620 – £2,050per junction
Movement joint and making goodest.£410 – £1,250per junction
Underpinning the extension where needed£1,050 – £2,600per metre of wall

How we usually approach extension pulling away repairs

Junction crack repair with stainless ties

The open joint is cut out, stainless ties or helical bars are fixed across it into both the old and new masonry, and the joint is repointed or rendered to match. Inside, the corner is replastered. This suits extensions that moved once and have since stopped.

Best for: Settled extensions with a stable gap at the junction

Movement joint and making good

Where some seasonal movement is expected to continue, the junction is formed into a proper flexible movement joint with a compressible filler and sealant, so the two parts can move without cracking. Flashings and internal finishes are detailed to suit.

Best for: Minor ongoing movement that does not threaten the structure

What happens during extension pulling away repairs, step by step?

  1. Show us the junction

    Send photos of the crack outside, the internal corner and any flashing above, with a measure for scale. We give a free initial assessment and an initial view on whether the gap is likely old or still opening.

  2. Find what is moving

    An independent chartered structural engineer can inspect, and we can arrange one. A drain survey under the extension, a trial pit at its footing and tell-tale monitoring across the joint are common checks before choosing the repair.

  3. Finish and hand over

    Internal corners are replastered, skirtings and coving refixed, and doors or windows in the extension eased where the movement affected them. Records of the repair and any approvals are passed to you.

Rules for extension pulling away repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Questions about extension pulling away repairs in Taunton

How much will extension pulling away repairs cost in Taunton?

Guide prices for extension pulling away repairs in Taunton start from about £620 per junction, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you cover Taunton?

We do. Taunton and the surrounding area are covered, including nearby Bridgwater and Burnham-on-Sea. A free initial assessment from your photos is the first step.

Is the ground in Somerset prone to subsidence?

Somerset mixes Lias clays, Mercia Mudstone, limestone hills and the peat and alluvium of the Levels around Bridgwater, which can settle. The former Somerset coalfield around Radstock and Midsomer Norton left recorded workings. Only an investigation can say why a particular building has moved.

What is a movement joint?

A movement joint is a deliberate, flexible break in a wall that lets two parts of a building move slightly without cracking. It is filled with a compressible material and sealed. At an extension junction it can replace a rigid joint that keeps cracking.

Is it normal for an extension to crack at the join?

A fine crack at the junction is fairly common, especially in the first few years as a new extension settles. It becomes a concern when the gap is widening, tapering, letting in water or matched by sticking doors and sloping floors. Those signs point to continuing movement.

Other structural repairs in Taunton

Extension pulling away repairs near Taunton

If the junction at your Taunton property keeps reopening, send dated photos and we will suggest whether monitoring, a drain survey or a repair comes next.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote