Montrose · Angus and Dundee
Chimney stack repairs in Montrose
Damp on a chimney breast in a Montrose home often starts at the top of the stack, where cracked flaunching or failed pointing lets rain in. Fixing the stack and capping unused flues usually stops it at the source.
Guide price from£475per stack inc VAT
- Postcodes
- DD10
- Population
- about 12,000
- Area
- Angus and Dundee
- Pricing region
- Scotland
What should you know about the ground under Montrose?
Montrose (DD10) has around 12,000 residents and sits in Angus and Dundee. Neighbouring towns we cover: Arbroath (12 miles), Forfar (17 miles) and Carnoustie (17 miles).
Most of Angus and Dundee is on firmer ground than the clay belts of the south-east. Ground movement here is more often linked to soils, drains and trees than to mining. Typical buildings in Angus and Dundee: Sandstone tenements in Dundee, fishing-town houses and post-war estates.
What to look for before calling about chimney stack repairs
- Damp patches on the chimney breast inside, especially after rain
- Cracked or missing flaunching around the top of the stack
- Mortar washed out of joints, leaving bricks standing proud
Chimney stack repairs prices in Montrose
The ranges below reflect typical Scotland costs for chimney stack repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Repointing, flaunching and minor brick repairs | £475 – £1,900 | per stack |
| Partial or full stack rebuild | £2,850 – £9,500 | per stack |
| Stack restraint or strappingest. | £380 – £1,150 | per stack |
How we usually approach chimney stack repairs
Partial or full rebuild
Where the lean is pronounced or the brickwork is badly decayed, the stack is taken down to sound masonry, often to roof level, and rebuilt plumb with new flashings and flaunching. Original bricks are cleaned and reused where possible to keep the appearance.
Best for: Badly leaning or decayed stacks
Stack restraint or strapping
A stack that has leaned slightly but is otherwise sound can be restrained with stainless straps or ties fixed back to the roof structure or the gable. This stops further movement without taking the stack down, and is often combined with repointing.
Best for: Slightly leaning stacks with sound brickwork
What happens during chimney stack repairs, step by step?
Look from the ground
Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.
Check what is below
We ask whether any chimney breasts have been removed, and check the loft and rooms below for cracking. If a breast has gone without proper support, we recommend an independent chartered structural engineer before any stack work.
Repair, restrain or rebuild
The agreed work is carried out: repointing, new flaunching and pots, restraint, or taking the stack down and rebuilding it. Lead flashings where the stack meets the roof are checked and renewed if needed.
Rules for chimney stack repairs in Scotland
In Scotland, underpinning and other structural alterations generally need a building warrant from the council’s building standards service before work starts, and a completion certificate at the end; small like-for-like repairs often do not. There is no Party Wall Act in Scotland; shared walls are covered by title deeds and, for flats, the Tenements (Scotland) Act 2004.
Questions about chimney stack repairs in Montrose
How much will chimney stack repairs cost in Montrose?
Guide prices for chimney stack repairs in Montrose start from about £475 per stack, including VAT, on Scotland rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you cover Montrose?
We do. Montrose and the surrounding area are covered, including nearby Arbroath and Forfar. A free initial assessment from your photos is the first step.
Is the ground in Angus and Dundee prone to subsidence?
Angus and Dundee sit on Old Red Sandstone and igneous rock with glacial and raised-beach deposits. Hillside sites in Dundee mean retaining walls are common. Only an investigation can say why a particular building has moved.
What is chimney flaunching?
Flaunching is the sloped bed of mortar on top of a chimney stack that holds the pots in place and throws rainwater off. When it cracks, water gets into the stack and pots can work loose. Renewing it is one of the most common stack repairs.
Why is my chimney stack leaning?
Most leaning stacks are caused by sulphate attack, where chemicals from old flue gases make the mortar expand more on the wetter side, so the stack bends away from the weather. Frost damage and failed pointing can make it worse. A recently leaning stack can also signal problems below.
Other structural repairs in Montrose
- Boundary and garden wall repairs
- Lintel replacement
- Subsidence insurance claim repairs
- Bowing wall repairs
- Wall tie replacement
Chimney stack repairs near Montrose
The quote tool gives guide prices for stack repointing, restraint and rebuilds in Montrose; send photos to narrow down which you need.