Angus and Dundee · Scotland
Chimney stack repairs in Angus and Dundee
Looking for chimney stack repairs in Angus and Dundee? Send us photos for a free initial view. Most of Angus and Dundee is on firmer ground than the clay belts of the south-east, so we look at the ground, drains and nearby trees before recommending anything.
Guide price from£475per stack inc VAT
- Area
- Angus and Dundee
- Pricing region
- Scotland
- Ground
- Mostly firmer ground
- Towns listed
- 5
Why does the ground in Angus and Dundee matter for chimney stack repairs?
Angus and Dundee sit on Old Red Sandstone and igneous rock with glacial and raised-beach deposits. Hillside sites in Dundee mean retaining walls are common.
Ground movement here is more often linked to soils, drains and trees than to mining. Across Angus and Dundee, most homes are sandstone tenements in Dundee, fishing-town houses and post-war estates.
What to look for before calling about chimney stack repairs
- Bits of brick, mortar or render landing in the garden or gutter
- A stack visibly leaning when you look along the roof ridge
- Cracked or missing flaunching around the top of the stack
- Mortar washed out of joints, leaving bricks standing proud
Chimney stack repairs prices in Angus and Dundee
The ranges below reflect typical Scotland costs for chimney stack repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Repointing, flaunching and minor brick repairs | £475 – £1,900 | per stack |
| Partial or full stack rebuild | £2,850 – £9,500 | per stack |
| Stack restraint or strappingest. | £380 – £1,150 | per stack |
How we usually approach chimney stack repairs
Partial or full rebuild
Where the lean is pronounced or the brickwork is badly decayed, the stack is taken down to sound masonry, often to roof level, and rebuilt plumb with new flashings and flaunching. Original bricks are cleaned and reused where possible to keep the appearance.
Best for: Badly leaning or decayed stacks
Stack restraint or strapping
A stack that has leaned slightly but is otherwise sound can be restrained with stainless straps or ties fixed back to the roof structure or the gable. This stops further movement without taking the stack down, and is often combined with repointing.
Best for: Slightly leaning stacks with sound brickwork
Repointing and brick repairs
Eroded joints are raked out and repointed in a mortar suited to the brick, often a lime-based mix on older stacks. Spalled or cracked bricks are cut out and replaced with matched reclaimed or new bricks. On many stacks this, with new flaunching, is all that is needed.
Best for: Upright stacks with weathered joints and some damaged bricks
What happens during chimney stack repairs, step by step?
Look from the ground
Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.
Check what is below
We ask whether any chimney breasts have been removed, and check the loft and rooms below for cracking. If a breast has gone without proper support, we recommend an independent chartered structural engineer before any stack work.
Repair, restrain or rebuild
The agreed work is carried out: repointing, new flaunching and pots, restraint, or taking the stack down and rebuilding it. Lead flashings where the stack meets the roof are checked and renewed if needed.
Do you need approval for chimney stack repairs in Scotland?
In Scotland, underpinning and other structural alterations generally need a building warrant from the council’s building standards service before work starts, and a completion certificate at the end; small like-for-like repairs often do not. There is no Party Wall Act in Scotland; shared walls are covered by title deeds and, for flats, the Tenements (Scotland) Act 2004.
Chimney stack repairs near you in Angus and Dundee
Questions about chimney stack repairs in Angus and Dundee
Does the ground around Dundee cause cracking?
Angus and Dundee sit on Old Red Sandstone and igneous rock with glacial and raised-beach deposits. Hillside sites in Dundee mean retaining walls are common. Ground movement here is more often linked to soils, drains and trees than to mining. Only an investigation on site can say why a particular building has moved.
How much will chimney stack repairs cost in Angus and Dundee?
On Scotland rates, chimney stack repairs starts from about £475 per stack, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
What if a chimney breast below has been removed?
Where the breast has gone but the stack is still on the roof, how that stack is now held up is a structural question. Cracking in nearby ceilings or a dropped stack are warning signs. An independent chartered structural engineer should assess it before any repair, and we can arrange one.
Why is my chimney stack leaning?
Most leaning stacks are caused by sulphate attack, where chemicals from old flue gases make the mortar expand more on the wetter side, so the stack bends away from the weather. Frost damage and failed pointing can make it worse. A recently leaning stack can also signal problems below.
Do I need scaffolding for chimney repairs?
In almost all cases, yes. Safe work on a stack needs a stable platform at stack height, which usually means scaffold. Ladders and roof ladders do not give a safe place to repoint, lift pots or rebuild brickwork.