Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Redbridge · Greater London

Wall tie replacement in Redbridge

For landlords with older housing stock in Redbridge, wall ties are worth checking before the cracks appear. A short survey on each elevation gives you a clear record and a priced plan if replacement is needed.

Guide price from£2,250per house inc VAT

Drilling a mortar joint for a remedial wall tie on a 1960s cavity wall
Postcodes
IG1, IG2, IG4, IG5, IG6
Population
about 310,000
Area
Greater London
Pricing region
London

What should you know about the ground under Redbridge?

We cover the whole of Redbridge, including postcode districts IG1, IG2, IG4, IG5, IG6; about 310,000 people live in the borough. If you are just outside Redbridge, we also cover Barking and Dagenham (4 miles), Waltham Forest (4 miles) and Newham (5 miles).

Much of Greater London sits on clay that shrinks in dry summers and swells in wet winters. Ground movement here is more often linked to soils, drains and trees than to mining. Typical buildings in Greater London: Victorian and Edwardian terraces with shallow footings, inter-war semis in the outer boroughs, and converted flats and mansion blocks.

Symptoms that point to wall tie replacement

  • Mortar joints that look wider or opened up on one elevation
  • The roof edge or verge lifting slightly above the brickwork
  • Outer brickwork bowing or bulging, often worst near the top

Guide prices for wall tie replacement in Redbridge

The ranges below reflect typical London costs for wall tie replacement, including VAT. Scaffold, access and making good can push a job to the top of the range.

Guide prices inc VAT on London rates. Items marked est. are our estimates.
ItemGuide pricePer
Mid-terrace houseest.£2,250 – £4,400per house
Semi-detached house£3,100 – £6,250per house
Detached houseest.£4,400 – £8,750per house
Scaffolding where neededest.£750 – £2,250per elevation

Methods for wall tie replacement

Remedial tie installation

New stainless ties are drilled through the outer leaf into the inner leaf, then fixed by mechanical expansion or resin, depending on the masonry. They are placed to a set grid across each elevation, with extra ties around openings and at the edges. Holes are made good in matching mortar.

Best for: Walls where the original ties have failed or are missing

Removing old ties and rebedding

On badly cracked elevations the old ties are cut out from the outer face, the joints raked and rebedded, and the brickwork repointed. It is more work than isolation but removes the source of expansion entirely. An engineer or the survey report usually specifies where this is needed.

Best for: Elevations with severe cracking or lifting

From first photo to finished repair

  1. Access

    Ties are fitted across the whole of each affected elevation, so scaffold or a tower is usually needed above ground floor. We plan access around conservatories, extensions, neighbours’ land and any parking that must be suspended.

  2. Install the new ties

    New stainless ties are drilled and fixed to the specified grid, with closer spacing around windows, doors and the roofline. Sample ties can be pull-tested to confirm they are holding in your particular brick and block.

  3. Deal with the old ties and make good

    Old ties are isolated or removed where the report calls for it, cracked joints are raked out and repointed, and drilled holes are filled in matching mortar. A written note of tie positions and findings goes in your property file.

Rules for wall tie replacement in England

Like-for-like repairs such as crack stitching and repointing do not usually need building control approval in England, but anything that changes or strengthens the structure, such as underpinning or rebuilding a wall, does. If the work touches a party wall, the Party Wall etc. Act 1996 may apply.

Frequently asked questions

How much should I budget for wall tie replacement in Redbridge?

Guide prices for wall tie replacement in Redbridge start from about £2,250 per house, including VAT, on London rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Can you survey a property in Redbridge?

Yes, Redbridge is covered, along with postcode districts IG1, IG2, IG4, IG5. We also cover nearby Barking and Dagenham and Waltham Forest.

Why do houses in Greater London crack?

Most of Greater London sits on London Clay, among the most shrinkage-prone ground in the UK, with river gravels along the Thames. Subsidence claims here are among the most frequent in the country, especially after dry summers and near street and garden trees. Only an investigation can say why a particular building has moved.

Is wall tie failure covered by insurance?

Usually not, because insurers treat it as gradual deterioration. Damage caused by a sudden event, such as part of a wall collapsing in a storm, may be treated differently under some policies. Check your policy wording, and tell your insurer if you are unsure.

Do the old wall ties have to be removed?

Not always, because thin wire ties that cannot swell are usually left in place once new ties are fitted. Thicker ties that are still expanding and cracking the wall are isolated or removed so they stop causing damage. The survey decides which applies.

Related work in Redbridge

Wall tie replacement near Redbridge

If your Redbridge home has a bulging outer wall, send photos from a few angles and we will help you decide what needs checking first.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote