Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Mexborough · South Yorkshire

Roof structure repairs in Mexborough

Roofs in Mexborough that were re-covered with heavier concrete tiles, or had struts cut out for a loft room, often start to sag years later. Spotting which change caused the movement is the first step to a repair that holds.

Guide price from£285per rafter inc VAT

New timber purlin and struts strengthening the rafters in a loft
Postcodes
S62, S63, S64
Population
about 15,000
Area
South Yorkshire
Pricing region
Yorkshire and the Humber

Why does the ground in South Yorkshire matter for roof structure repairs?

Mexborough, South Yorkshire: about 15,000 residents across postcode districts S62, S63, S64. If you are just outside Mexborough, we also cover Wath-upon-Dearne (2 miles), Conisbrough (3 miles) and Rawmarsh (3 miles).

Clay soils are found in parts of South Yorkshire. Historic coal workings are recorded beneath parts of South Yorkshire, and a coal mining search is worth checking where movement is unexplained. Across South Yorkshire, most homes are brick and stone terraces, colliery housing, inter-war council estates and post-war semis.

Guide prices for roof structure repairs in Mexborough

The ranges below reflect typical Yorkshire and the Humber costs for roof structure repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.

Guide prices inc VAT on Yorkshire and the Humber rates. Items marked est. are our estimates.
ItemGuide pricePer
Repairing or doubling a rafter£285 – £570per rafter
Purlin and strut strengthening£1,150 – £2,850per roof
Tying in roof spread (straps and ties)est.£760 – £2,400per roof

Methods for roof structure repairs

Repairing or doubling rafters

Cracked, sagging or rotten rafters are strengthened by fixing a new timber alongside, often called doubling, and rotten rafter feet are cut back and spliced. The work is usually done from inside the loft with the tiles left in place, unless the covering is coming off anyway.

Best for: Individual rafters that have cracked, sagged or rotted at the feet

Purlin and strut strengthening

Undersized purlins are strengthened with extra timber or replaced, and new struts are taken down to a load-bearing wall. Where there is no suitable wall, an engineer designs the load path. Temporary props hold the roof while members are changed.

Best for: Sagging slopes, slim purlins and struts removed from the loft

From first photo to finished repair

  1. Send photos

    Photograph the roof from across the street, both slopes if you can, and the loft timbers with a torch. Include the eaves and any cracks just below them. From these we can usually tell sag from spread and whether an engineer is needed.

  2. Loft and outside survey

    On site we check rafter sizes and spacing, purlins, struts, ties and wall plates, look for rot and past alterations, and measure any lean at the wall head. The covering is noted too, because its weight affects the repair.

  3. Prop, strengthen and tie

    The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.

Symptoms that point to roof structure repairs

  • Struts, collars or ties cut out or missing in the loft
  • Roof slope looking hollow or wavy between the ridge and the gutter
  • Ridge line dipping in the middle when seen from the street

Rules for roof structure repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Frequently asked questions

What is the price of roof structure repairs in Mexborough?

Guide prices for roof structure repairs in Mexborough start from about £285 per rafter, including VAT, on Yorkshire and the Humber rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you carry out roof structure repairs in Mexborough?

We do. Mexborough and the surrounding area are covered, including nearby Wath-upon-Dearne and Conisbrough. A free initial assessment from your photos is the first step.

Does the ground around Mexborough cause cracking?

South Yorkshire lies largely on the Coal Measures, with a long history of shallow and deep mining around Barnsley, Rotherham and Doncaster. Sheffield's hillside sites add retaining walls and steep ground to the mix. Only an investigation can say why a particular building has moved.

Do roof structure repairs need building control?

Usually yes, where the structure is strengthened or altered, or the covering becomes significantly heavier. In England and Wales that falls under Part A, in Scotland it generally needs a building warrant, and in Northern Ireland council building control approves it. We deal with building control where the work needs it.

Why are there cracks just below the eaves?

A horizontal crack just below the eaves, along the front or back wall, is a common sign of roof spread. The rafters push the top of the wall outward and the masonry cracks where it hinges. Corroded wall ties can cause similar cracks, so the cause needs checking.

More repairs we carry out in Mexborough

Roof structure repairs near Mexborough

Every rafter, purlin and tie on the job in Mexborough is listed in the written quote, which becomes a fixed price in writing once the repair is specified.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote