Bridgwater · Somerset
Roof structure repairs in Bridgwater
Many older roofs, in Bridgwater and across Somerset alike, were built with slim purlins and few ties. A little historic movement is normal, so we check whether the roof is still moving before recommending how far the strengthening needs to go.
Guide price from£310per rafter inc VAT
- Postcodes
- TA6
- Population
- about 41,000
- Area
- Somerset
- Pricing region
- South West
How do local ground conditions affect roof structure repairs in Bridgwater?
Bridgwater, Somerset: about 41,000 residents across postcode districts TA6. If you are just outside Bridgwater, we also cover Burnham-on-Sea (8 miles), Taunton (9 miles) and Weston-super-Mare (15 miles).
Parts of Somerset have clay that can shrink near trees in dry spells. Parts of Somerset lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Typical buildings in Somerset: Bath stone Georgian terraces, Victorian houses in Taunton and Weston-super-Mare, and post-war estates.
Methods for roof structure repairs
Wall plate replacement
Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.
Best for: Rot along the eaves where rafters bear on the wall
Purlin and strut strengthening
Undersized purlins are strengthened with extra timber or replaced, and new struts are taken down to a load-bearing wall. Where there is no suitable wall, an engineer designs the load path. Temporary props hold the roof while members are changed.
Best for: Sagging slopes, slim purlins and struts removed from the loft
From first photo to finished repair
Loft and outside survey
On site we check rafter sizes and spacing, purlins, struts, ties and wall plates, look for rot and past alterations, and measure any lean at the wall head. The covering is noted too, because its weight affects the repair.
Engineer’s design where needed
Where purlins, struts or ties must be redesigned, or the roof carries a heavier covering, an independent chartered structural engineer is appointed to specify the work. We can arrange this, and their design sets the sizes and fixings.
Prop, strengthen and tie
The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.
Symptoms that point to roof structure repairs
- Horizontal cracks in the wall just below the eaves or ceiling line
- Ridge line dipping in the middle when seen from the street
- Top of an outside wall leaning out at eaves level
Guide prices for roof structure repairs in Bridgwater
The ranges below reflect typical South West costs for roof structure repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Repairing or doubling a rafter | £310 – £620 | per rafter |
| Purlin and strut strengthening | £1,250 – £3,100 | per roof |
| Tying in roof spread (straps and ties)est. | £825 – £2,600 | per roof |
Rules for roof structure repairs in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Frequently asked questions
How much will roof structure repairs cost in Bridgwater?
Guide prices for roof structure repairs in Bridgwater start from about £310 per rafter, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you cover Bridgwater?
We do. Bridgwater and the surrounding area are covered, including nearby Burnham-on-Sea and Taunton. A free initial assessment from your photos is the first step.
Is the ground in Somerset prone to subsidence?
Somerset mixes Lias clays, Mercia Mudstone, limestone hills and the peat and alluvium of the Levels around Bridgwater, which can settle. The former Somerset coalfield around Radstock and Midsomer Norton left recorded workings. Only an investigation can say why a particular building has moved.
Can the roof be strengthened without removing the tiles?
In most cases, yes. Doubling rafters, adding struts and fitting ties can all be done from inside the loft with the coverings in place. Tiles usually only come off where timber near the eaves is badly decayed, or the roof is being re-covered anyway.
Why are there cracks just below the eaves?
A horizontal crack just below the eaves, along the front or back wall, is a common sign of roof spread. The rafters push the top of the wall outward and the masonry cracks where it hinges. Corroded wall ties can cause similar cracks, so the cause needs checking.
Other structural repairs in Bridgwater
- Resin injection ground stabilisation
- Brick arch repairs
- Subsidence insurance claim repairs
- Concrete repairs
- Lintel replacement
Roof structure repairs near Bridgwater
If struts were removed for a loft room in Bridgwater, send photos of the space and we will price putting a proper load path back.