Mid Glamorgan · Wales
Roof structure repairs in Mid Glamorgan
Across Mid Glamorgan, requests for roof structure repairs usually begin with a crack someone has noticed getting wider. Mid Glamorgan has a mix of ground, with clay in some places and firmer rock in others. A repair only lasts if the reason for the movement has stopped.
Guide price from£275per rafter inc VAT
- Area
- Mid Glamorgan
- Pricing region
- Wales
- Ground
- Clay in parts
- Towns listed
- 12
How do local ground conditions affect roof structure repairs in Mid Glamorgan?
Mid Glamorgan lies on the South Wales coalfield, with dense historic workings, spoil tips and steep valley sides. Landslip, retaining walls and mining legacy are all live issues in the valleys.
Historic coal workings are recorded beneath parts of Mid Glamorgan, and a coal mining search is worth checking where movement is unexplained. What you mostly find across Mid Glamorgan: long stone and brick terraces on valley sides, Victorian houses in Bridgend and post-war estates.
Is it time for roof structure repairs? Common signs
- Daylight through the tiles, or timber that is damp, stained or crumbling
- Horizontal cracks in the wall just below the eaves or ceiling line
- Ridge line dipping in the middle when seen from the street
- Roof slope looking hollow or wavy between the ridge and the gutter
What should you budget for roof structure repairs in Mid Glamorgan?
The ranges below reflect typical Wales costs for roof structure repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Repairing or doubling a rafter | £275 – £550 | per rafter |
| Purlin and strut strengthening | £1,100 – £2,750 | per roof |
| Tying in roof spread (straps and ties)est. | £735 – £2,300 | per roof |
Repair options we may recommend
Purlin and strut strengthening
Undersized purlins are strengthened with extra timber or replaced, and new struts are taken down to a load-bearing wall. Where there is no suitable wall, an engineer designs the load path. Temporary props hold the roof while members are changed.
Best for: Sagging slopes, slim purlins and struts removed from the loft
Wall plate replacement
Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.
Best for: Rot along the eaves where rafters bear on the wall
Repairing or doubling rafters
Cracked, sagging or rotten rafters are strengthened by fixing a new timber alongside, often called doubling, and rotten rafter feet are cut back and spliced. The work is usually done from inside the loft with the tiles left in place, unless the covering is coming off anyway.
Best for: Individual rafters that have cracked, sagged or rotted at the feet
What to expect when we carry out roof structure repairs
Send photos
Photograph the roof from across the street, both slopes if you can, and the loft timbers with a torch. Include the eaves and any cracks just below them. From these we can usually tell sag from spread and whether an engineer is needed.
Written quote
You receive a no-obligation written quote listing each timber repair, any ties or straps, propping, scaffolding and making good. Once the repair is specified, the figure becomes a fixed price in writing.
Prop, strengthen and tie
The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.
Do you need approval for roof structure repairs in Wales?
In Wales, the Welsh version of the Building Regulations applies. Underpinning and other work that alters or strengthens the structure needs building control approval and inspection; like-for-like repairs often do not. The Party Wall etc. Act 1996 applies to work on party walls and excavation close to a neighbour’s foundations.
Roof structure repairs near you in Mid Glamorgan
- Rhondda
- Tonypandy
- Bridgend
- Merthyr Tydfil
- Pontypridd
- Aberdare
- Caerphilly
- Maesteg
- Porthcawl
- Llantrisant
- Nelson
- Mountain Ash
Your roof structure repairs questions
Does the ground around Rhondda cause cracking?
Mid Glamorgan lies on the South Wales coalfield, with dense historic workings, spoil tips and steep valley sides. Landslip, retaining walls and mining legacy are all live issues in the valleys. Historic coal workings are recorded beneath parts of Mid Glamorgan, and a coal mining search is worth checking where movement is unexplained. Only an investigation on site can say why a particular building has moved.
How much will roof structure repairs cost in Mid Glamorgan?
On Wales rates, roof structure repairs starts from about £275 per rafter, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Do roof structure repairs need building control?
Usually yes, where the structure is strengthened or altered, or the covering becomes significantly heavier. In England and Wales that falls under Part A, in Scotland it generally needs a building warrant, and in Northern Ireland council building control approves it. We deal with building control where the work needs it.
Why are there cracks just below the eaves?
A horizontal crack just below the eaves, along the front or back wall, is a common sign of roof spread. The rafters push the top of the wall outward and the masonry cracks where it hinges. Corroded wall ties can cause similar cracks, so the cause needs checking.
Do I need a structural engineer for roof repairs?
For like-for-like repairs to a few rafters, often not. Where purlins, struts or ties are being redesigned, the covering is getting heavier or the walls are being pushed out, you usually do. Where the repair needs an engineer’s design or sign-off, an independent chartered structural engineer is appointed, and we can arrange this.