Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Skegness · Lincolnshire

Roof structure repairs in Skegness

Before buying or re-roofing a house in Skegness, it is worth knowing whether the frame can carry its covering. Send photos of the loft and the ridge, and we will tell you whether the timbers look adequate or need strengthening.

Guide price from£295per rafter inc VAT

New timber purlin and struts strengthening the rafters in a loft
Postcodes
PE25
Population
about 25,000
Area
Lincolnshire
Pricing region
East Midlands

Why does the ground in Lincolnshire matter for roof structure repairs?

We cover Skegness and its postcode districts PE25, part of Lincolnshire, with a population of roughly 25,000. We also take enquiries from nearby Boston (19 miles) and Louth (21 miles).

Lincolnshire has a mix of ground, with clay in some places and firmer rock in others. Ground movement here is more often linked to soils, drains and trees than to mining. Typical buildings in Lincolnshire: Victorian terraces in Lincoln and Grimsby, fenland brick houses, seaside bungalows and post-war estates.

Symptoms that point to roof structure repairs

  • Daylight through the tiles, or timber that is damp, stained or crumbling
  • Struts, collars or ties cut out or missing in the loft
  • Roof slope looking hollow or wavy between the ridge and the gutter

Guide prices for roof structure repairs in Skegness

Guide prices below are for homes in Skegness, on East Midlands rates and including VAT. A survey or good photos let us turn them into a fixed written price.

Guide prices inc VAT on East Midlands rates. Items marked est. are our estimates.
ItemGuide pricePer
Repairing or doubling a rafter£295 – £590per rafter
Purlin and strut strengthening£1,200 – £2,950per roof
Tying in roof spread (straps and ties)est.£785 – £2,450per roof

Methods for roof structure repairs

Tying in roof spread

New ties, collars or steel straps connect opposite rafters, or fix the rafter feet and wall plate firmly to the ceiling joists, so the outward thrust is resisted. Leaning wall heads are strapped back to the roof, and a badly spread roof may need partly rebuilding first.

Best for: Walls pushed out at eaves level by spreading rafters

Repairing or doubling rafters

Cracked, sagging or rotten rafters are strengthened by fixing a new timber alongside, often called doubling, and rotten rafter feet are cut back and spliced. The work is usually done from inside the loft with the tiles left in place, unless the covering is coming off anyway.

Best for: Individual rafters that have cracked, sagged or rotted at the feet

From first photo to finished repair

  1. Send photos

    Photograph the roof from across the street, both slopes if you can, and the loft timbers with a torch. Include the eaves and any cracks just below them. From these we can usually tell sag from spread and whether an engineer is needed.

  2. Loft and outside survey

    On site we check rafter sizes and spacing, purlins, struts, ties and wall plates, look for rot and past alterations, and measure any lean at the wall head. The covering is noted too, because its weight affects the repair.

  3. Prop, strengthen and tie

    The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.

Rules for roof structure repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Frequently asked questions

How much should I budget for roof structure repairs in Skegness?

Guide prices for roof structure repairs in Skegness start from about £295 per rafter, including VAT, on East Midlands rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Can you survey a property in Skegness?

Yes. We take enquiries from across Skegness, including PE25, and from nearby places such as Boston and Louth. Send photos for a free initial view and we will tell you what happens next.

Why do houses in Lincolnshire crack?

Lincolnshire has Lias, Oxford and Kimmeridge clays on the vales, chalk on the Wolds and soft silts and peat in the fens around Boston and Spalding. Fen ground and clay can both settle or shrink in dry years. Only an investigation can say why a particular building has moved.

Is a sagging roof ridge dangerous?

A slight, even dip in an old roof is often historic movement that stopped long ago. A sag that is getting worse, cracking timbers, walls pushing out at the eaves or recently removed struts should be checked soon. Avoid storing heavy items in the loft until then.

Do roof structure repairs need building control?

Usually yes, where the structure is strengthened or altered, or the covering becomes significantly heavier. In England and Wales that falls under Part A, in Scotland it generally needs a building warrant, and in Northern Ireland council building control approves it. We deal with building control where the work needs it.

Related work in Skegness

Roof structure repairs near Skegness

Every rafter, purlin and tie on the job in Skegness is listed in the written quote, which becomes a fixed price in writing once the repair is specified.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote