Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Swanscombe · Kent

Roof structure repairs in Swanscombe

Many older roofs, in Swanscombe and across Kent alike, were built with slim purlins and few ties. A little historic movement is normal, so we check whether the roof is still moving before recommending how far the strengthening needs to go.

Guide price from£335per rafter inc VAT

New timber purlin and struts strengthening the rafters in a loft
Postcodes
DA10
Population
about 16,000
Area
Kent
Pricing region
South East

How do local ground conditions affect roof structure repairs in Swanscombe?

Swanscombe is in Kent and takes in postcode districts DA10. About 16,000 people live there. Nearby places we cover include Gravesend (3 miles), Longfield (3 miles) and Dartford (4 miles).

Much of Kent sits on clay that shrinks in dry summers and swells in wet winters. Parts of Kent lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Across Kent, most homes are Victorian terraces in the Medway towns, weatherboarded and Wealden houses, 1930s semis and seaside bungalows.

Roof structure repairs prices in Swanscombe

Prices in Swanscombe are worked out on South East rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.

Guide prices inc VAT on South East rates. Items marked est. are our estimates.
ItemGuide pricePer
Repairing or doubling a rafter£335 – £670per rafter
Purlin and strut strengthening£1,350 – £3,350per roof
Tying in roof spread (straps and ties)est.£895 – £2,800per roof

How we usually approach roof structure repairs

Repairing or doubling rafters

Cracked, sagging or rotten rafters are strengthened by fixing a new timber alongside, often called doubling, and rotten rafter feet are cut back and spliced. The work is usually done from inside the loft with the tiles left in place, unless the covering is coming off anyway.

Best for: Individual rafters that have cracked, sagged or rotted at the feet

Tying in roof spread

New ties, collars or steel straps connect opposite rafters, or fix the rafter feet and wall plate firmly to the ceiling joists, so the outward thrust is resisted. Leaning wall heads are strapped back to the roof, and a badly spread roof may need partly rebuilding first.

Best for: Walls pushed out at eaves level by spreading rafters

What happens during roof structure repairs, step by step?

  1. Send photos

    Photograph the roof from across the street, both slopes if you can, and the loft timbers with a torch. Include the eaves and any cracks just below them. From these we can usually tell sag from spread and whether an engineer is needed.

  2. Loft and outside survey

    On site we check rafter sizes and spacing, purlins, struts, ties and wall plates, look for rot and past alterations, and measure any lean at the wall head. The covering is noted too, because its weight affects the repair.

  3. Prop, strengthen and tie

    The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.

What to look for before calling about roof structure repairs

  • Top of an outside wall leaning out at eaves level
  • Struts, collars or ties cut out or missing in the loft
  • Roof slope looking hollow or wavy between the ridge and the gutter

Rules for roof structure repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Questions about roof structure repairs in Swanscombe

How much will roof structure repairs cost in Swanscombe?

Guide prices for roof structure repairs in Swanscombe start from about £335 per rafter, including VAT, on South East rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you cover Swanscombe?

We do. Swanscombe and the surrounding area are covered, including nearby Gravesend and Longfield. A free initial assessment from your photos is the first step.

Is the ground in Kent prone to subsidence?

North Kent sits on London Clay, central Kent on Gault and Weald Clays and the Downs on chalk, so shrinkable clay is widespread. East Kent around Deal and Dover had a small deep coalfield, worked until the late 1980s. Only an investigation can say why a particular building has moved.

Can the roof be strengthened without removing the tiles?

In most cases, yes. Doubling rafters, adding struts and fitting ties can all be done from inside the loft with the coverings in place. Tiles usually only come off where timber near the eaves is badly decayed, or the roof is being re-covered anyway.

Is a sagging roof ridge dangerous?

A slight, even dip in an old roof is often historic movement that stopped long ago. A sag that is getting worse, cracking timbers, walls pushing out at the eaves or recently removed struts should be checked soon. Avoid storing heavy items in the loft until then.

Other structural repairs in Swanscombe

Roof structure repairs near Swanscombe

Send photos of the roof from the street and the loft timbers at your Swanscombe property for a free initial assessment and a no-obligation written quote.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote