Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Sutton · Greater London

Roof structure repairs in Sutton

A dipping ridge or a wavy roof slope in Sutton is usually a timber problem, not a tile problem. We look at the rafters, purlins, struts and ties from the loft, and at the wall heads from outside, before suggesting how to strengthen it.

Guide price from£375per rafter inc VAT

New timber purlin and struts strengthening the rafters in a loft
Postcodes
SM1, SM2, SM3, SM5, SM6
Population
about 210,000
Area
Greater London
Pricing region
London

What should you know about the ground under Sutton?

We cover the whole of Sutton, including postcode districts SM1, SM2, SM3, SM5, SM6; about 210,000 people live in the borough. Nearby, we also cover Ewell (3 miles), Banstead (3 miles) and Merton (3 miles).

Greater London is one of the parts of the UK where clay soils are most likely to move with the seasons. Ground movement here is more often linked to soils, drains and trees than to mining. Housing stock in Greater London: Victorian and Edwardian terraces with shallow footings, inter-war semis in the outer boroughs, and converted flats and mansion blocks.

Which repair method suits a home in Sutton?

Wall plate replacement

Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.

Best for: Rot along the eaves where rafters bear on the wall

Tying in roof spread

New ties, collars or steel straps connect opposite rafters, or fix the rafter feet and wall plate firmly to the ceiling joists, so the outward thrust is resisted. Leaning wall heads are strapped back to the roof, and a badly spread roof may need partly rebuilding first.

Best for: Walls pushed out at eaves level by spreading rafters

What happens when we carry out roof structure repairs in Sutton?

  1. Loft and outside survey

    On site we check rafter sizes and spacing, purlins, struts, ties and wall plates, look for rot and past alterations, and measure any lean at the wall head. The covering is noted too, because its weight affects the repair.

  2. Engineer’s design where needed

    Where purlins, struts or ties must be redesigned, or the roof carries a heavier covering, an independent chartered structural engineer is appointed to specify the work. We can arrange this, and their design sets the sizes and fixings.

  3. Prop, strengthen and tie

    The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.

Signs you may need roof structure repairs

  • Struts, collars or ties cut out or missing in the loft
  • Top of an outside wall leaning out at eaves level
  • Ridge line dipping in the middle when seen from the street

How much will roof structure repairs cost in Sutton?

These are guide prices for Sutton, using London rates and including VAT. Your written quote follows photos or a survey, and is fixed once the repair is specified.

Guide prices inc VAT on London rates. Items marked est. are our estimates.
ItemGuide pricePer
Repairing or doubling a rafter£375 – £750per rafter
Purlin and strut strengthening£1,500 – £3,750per roof
Tying in roof spread (straps and ties)est.£1,000 – £3,100per roof

Rules for roof structure repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Roof structure repairs in Sutton: questions and answers

How much will roof structure repairs cost in Sutton?

Guide prices for roof structure repairs in Sutton start from about £375 per rafter, including VAT, on London rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you cover Sutton?

Yes, Sutton is covered, along with postcode districts SM1, SM2, SM3, SM5. We also cover nearby Ewell and Banstead.

Is the ground in Greater London prone to subsidence?

Most of Greater London sits on London Clay, among the most shrinkage-prone ground in the UK, with river gravels along the Thames. Subsidence claims here are among the most frequent in the country, especially after dry summers and near street and garden trees. Only an investigation can say why a particular building has moved.

Do I need a structural engineer for roof repairs?

For like-for-like repairs to a few rafters, often not. Where purlins, struts or ties are being redesigned, the covering is getting heavier or the walls are being pushed out, you usually do. Where the repair needs an engineer’s design or sign-off, an independent chartered structural engineer is appointed, and we can arrange this.

Can heavy concrete tiles damage a roof?

Yes, if the frame was designed for lighter slate or tiles and was not strengthened. The extra weight makes rafters and purlins sag and can bring on roof spread. Before re-roofing in a heavier material, have the structure checked and notify building control.

Other structural repairs in Sutton

Roof structure repairs near Sutton

Get a free initial assessment of a sagging or spreading roof in Sutton from your photos or a call, and find out whether an engineer is needed.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote