Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Islington · Greater London

Roof structure repairs in Islington

Roofs in Islington that were re-covered with heavier concrete tiles, or had struts cut out for a loft room, often start to sag years later. Spotting which change caused the movement is the first step to a repair that holds.

Guide price from£375per rafter inc VAT

New timber purlin and struts strengthening the rafters in a loft
Postcodes
EC1, EC1A, EC1M, EC1R, EC1V
Population
about 220,000
Area
Greater London
Pricing region
London

What is the ground like in Greater London?

We cover the whole of Islington, including postcode districts EC1, EC1A, EC1M, EC1R, EC1V; about 220,000 people live in the borough. Nearby places we cover include Hackney (2 miles), Camden (2 miles) and Westminster (3 miles).

Greater London is one of the parts of the UK where clay soils are most likely to move with the seasons. Ground movement here is more often linked to soils, drains and trees than to mining. Across Greater London, most homes are Victorian and Edwardian terraces with shallow footings, inter-war semis in the outer boroughs, and converted flats and mansion blocks.

What happens during roof structure repairs, step by step?

  1. Loft and outside survey

    On site we check rafter sizes and spacing, purlins, struts, ties and wall plates, look for rot and past alterations, and measure any lean at the wall head. The covering is noted too, because its weight affects the repair.

  2. Engineer’s design where needed

    Where purlins, struts or ties must be redesigned, or the roof carries a heavier covering, an independent chartered structural engineer is appointed to specify the work. We can arrange this, and their design sets the sizes and fixings.

  3. Prop, strengthen and tie

    The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.

What to look for before calling about roof structure repairs

  • Top of an outside wall leaning out at eaves level
  • Roof slope looking hollow or wavy between the ridge and the gutter
  • Horizontal cracks in the wall just below the eaves or ceiling line

Roof structure repairs prices in Islington

Prices in Islington are worked out on London rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.

Guide prices inc VAT on London rates. Items marked est. are our estimates.
ItemGuide pricePer
Repairing or doubling a rafter£375 – £750per rafter
Purlin and strut strengthening£1,500 – £3,750per roof
Tying in roof spread (straps and ties)est.£1,000 – £3,100per roof

How we usually approach roof structure repairs

Tying in roof spread

New ties, collars or steel straps connect opposite rafters, or fix the rafter feet and wall plate firmly to the ceiling joists, so the outward thrust is resisted. Leaning wall heads are strapped back to the roof, and a badly spread roof may need partly rebuilding first.

Best for: Walls pushed out at eaves level by spreading rafters

Wall plate replacement

Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.

Best for: Rot along the eaves where rafters bear on the wall

Rules for roof structure repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Questions about roof structure repairs in Islington

What is the price of roof structure repairs in Islington?

Guide prices for roof structure repairs in Islington start from about £375 per rafter, including VAT, on London rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you carry out roof structure repairs in Islington?

Yes. We take enquiries from across Islington, including EC1, EC1A, EC1M, EC1R, and from nearby places such as Hackney and Camden. Send photos for a free initial view and we will tell you what happens next.

Does the ground around Islington cause cracking?

Most of Greater London sits on London Clay, among the most shrinkage-prone ground in the UK, with river gravels along the Thames. Subsidence claims here are among the most frequent in the country, especially after dry summers and near street and garden trees. Only an investigation can say why a particular building has moved.

Do I need a structural engineer for roof repairs?

For like-for-like repairs to a few rafters, often not. Where purlins, struts or ties are being redesigned, the covering is getting heavier or the walls are being pushed out, you usually do. Where the repair needs an engineer’s design or sign-off, an independent chartered structural engineer is appointed, and we can arrange this.

Why are there cracks just below the eaves?

A horizontal crack just below the eaves, along the front or back wall, is a common sign of roof spread. The rafters push the top of the wall outward and the masonry cracks where it hinges. Corroded wall ties can cause similar cracks, so the cause needs checking.

More repairs we carry out in Islington

Roof structure repairs near Islington

Seen the ridge dip at your Islington home? Photograph it from across the road, add a few loft shots, and we will tell you what it likely needs.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote