Bedfordshire · England
Roof structure repairs in Bedfordshire
Bedfordshire has its own mix of ground and building types, and that shapes how roof structure repairs is done here. Shrinkable clay is widespread in Bedfordshire.
Guide price from£315per rafter inc VAT
- Area
- Bedfordshire
- Pricing region
- East of England
- Ground
- Shrinkable clay widespread
- Towns listed
- 6
Is Bedfordshire prone to ground movement?
Much of Bedfordshire sits on Oxford Clay and Gault Clay, with chalk rising towards the Chilterns in the south. The clay vales shrink in dry summers and swell in wet winters, which is why seasonal cracking is common around Bedford.
Ground movement here is more often linked to soils, drains and trees than to mining. What you mostly find across Bedfordshire: Victorian terraces in Bedford and Luton, large inter-war and post-war estates, and newer estates on former clay pits and brickfields.
Guide prices for roof structure repairs in Bedfordshire
Guide prices below are for homes in Bedfordshire, on East of England rates and including VAT. A survey or good photos let us turn them into a fixed written price.
| Item | Guide price | Per |
|---|---|---|
| Repairing or doubling a rafter | £315 – £630 | per rafter |
| Purlin and strut strengthening | £1,250 – £3,150 | per roof |
| Tying in roof spread (straps and ties)est. | £840 – £2,600 | per roof |
Methods for roof structure repairs
Wall plate replacement
Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.
Best for: Rot along the eaves where rafters bear on the wall
Tying in roof spread
New ties, collars or steel straps connect opposite rafters, or fix the rafter feet and wall plate firmly to the ceiling joists, so the outward thrust is resisted. Leaning wall heads are strapped back to the roof, and a badly spread roof may need partly rebuilding first.
Best for: Walls pushed out at eaves level by spreading rafters
Repairing or doubling rafters
Cracked, sagging or rotten rafters are strengthened by fixing a new timber alongside, often called doubling, and rotten rafter feet are cut back and spliced. The work is usually done from inside the loft with the tiles left in place, unless the covering is coming off anyway.
Best for: Individual rafters that have cracked, sagged or rotted at the feet
From first photo to finished repair
Send photos
Photograph the roof from across the street, both slopes if you can, and the loft timbers with a torch. Include the eaves and any cracks just below them. From these we can usually tell sag from spread and whether an engineer is needed.
Engineer’s design where needed
Where purlins, struts or ties must be redesigned, or the roof carries a heavier covering, an independent chartered structural engineer is appointed to specify the work. We can arrange this, and their design sets the sizes and fixings.
Written quote
You receive a no-obligation written quote listing each timber repair, any ties or straps, propping, scaffolding and making good. Once the repair is specified, the figure becomes a fixed price in writing.
Symptoms that point to roof structure repairs
- Roof slope looking hollow or wavy between the ridge and the gutter
- Horizontal cracks in the wall just below the eaves or ceiling line
- Struts, collars or ties cut out or missing in the loft
- Ridge line dipping in the middle when seen from the street
Do you need approval for roof structure repairs in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Find roof structure repairs in your Bedfordshire town
Frequently asked questions
Why do houses in Bedfordshire crack?
Much of Bedfordshire sits on Oxford Clay and Gault Clay, with chalk rising towards the Chilterns in the south. The clay vales shrink in dry summers and swell in wet winters, which is why seasonal cracking is common around Bedford. Ground movement here is more often linked to soils, drains and trees than to mining. Only an investigation on site can say why a particular building has moved.
How much will roof structure repairs cost in Bedfordshire?
On East of England rates, roof structure repairs starts from about £315 per rafter, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Do I need a structural engineer for roof repairs?
For like-for-like repairs to a few rafters, often not. Where purlins, struts or ties are being redesigned, the covering is getting heavier or the walls are being pushed out, you usually do. Where the repair needs an engineer’s design or sign-off, an independent chartered structural engineer is appointed, and we can arrange this.
Is a sagging roof ridge dangerous?
A slight, even dip in an old roof is often historic movement that stopped long ago. A sag that is getting worse, cracking timbers, walls pushing out at the eaves or recently removed struts should be checked soon. Avoid storing heavy items in the loft until then.
Do roof structure repairs need building control?
Usually yes, where the structure is strengthened or altered, or the covering becomes significantly heavier. In England and Wales that falls under Part A, in Scotland it generally needs a building warrant, and in Northern Ireland council building control approves it. We deal with building control where the work needs it.