Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Ayrshire · Scotland

Roof structure repairs in Ayrshire

If you live in Ayrshire and are looking at roof structure repairs, the first question is why the wall moved. Clay shrinkage is less of a concern in Ayrshire, so other causes such as drains, poor footings or older walls are checked first; historic coal workings are recorded beneath parts of Ayrshire, and a coal mining search is worth checking where movement is unexplained.

Guide price from£285per rafter inc VAT

New timber purlin and struts strengthening the rafters in a loft
Area
Ayrshire
Pricing region
Scotland
Ground
Mostly firmer ground
Towns listed
7

What is the ground like in Ayrshire?

Ayrshire has a large coalfield, especially in the east around Kilmarnock and Cumnock, with recorded workings, and raised-beach sands and gravels along the coast.

Historic coal workings are recorded beneath parts of Ayrshire, and a coal mining search is worth checking where movement is unexplained. What you mostly find across Ayrshire: sandstone villas and terraces in the coastal towns, miners' rows and post-war estates.

Roof structure repairs prices in Ayrshire

Prices in Ayrshire are worked out on Scotland rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.

Guide prices inc VAT on Scotland rates. Items marked est. are our estimates.
ItemGuide pricePer
Repairing or doubling a rafter£285 – £570per rafter
Purlin and strut strengthening£1,150 – £2,850per roof
Tying in roof spread (straps and ties)est.£760 – £2,400per roof

How we usually approach roof structure repairs

Repairing or doubling rafters

Cracked, sagging or rotten rafters are strengthened by fixing a new timber alongside, often called doubling, and rotten rafter feet are cut back and spliced. The work is usually done from inside the loft with the tiles left in place, unless the covering is coming off anyway.

Best for: Individual rafters that have cracked, sagged or rotted at the feet

Wall plate replacement

Rotten or crushed wall plates are replaced in short lengths while the rafters above are propped, and bedded on the wall in mortar. The plate is then strapped down to the masonry. It is often combined with rafter foot splices along the same run.

Best for: Rot along the eaves where rafters bear on the wall

Tying in roof spread

New ties, collars or steel straps connect opposite rafters, or fix the rafter feet and wall plate firmly to the ceiling joists, so the outward thrust is resisted. Leaning wall heads are strapped back to the roof, and a badly spread roof may need partly rebuilding first.

Best for: Walls pushed out at eaves level by spreading rafters

What happens during roof structure repairs, step by step?

  1. Loft and outside survey

    On site we check rafter sizes and spacing, purlins, struts, ties and wall plates, look for rot and past alterations, and measure any lean at the wall head. The covering is noted too, because its weight affects the repair.

  2. Written quote

    You receive a no-obligation written quote listing each timber repair, any ties or straps, propping, scaffolding and making good. Once the repair is specified, the figure becomes a fixed price in writing.

  3. Prop, strengthen and tie

    The roof is propped where members are being changed, then rafters, purlins, struts and ties are repaired or added as specified. Coverings disturbed by the work are relaid, and building control inspects where the work needs it.

What to look for before calling about roof structure repairs

  • Top of an outside wall leaning out at eaves level
  • Daylight through the tiles, or timber that is damp, stained or crumbling
  • Horizontal cracks in the wall just below the eaves or ceiling line
  • Roof slope looking hollow or wavy between the ridge and the gutter
Roof structure repairs: purlin and struts added, roof spread tied inNEW PURLINSTRUTS + CEILING TIESPREADINDICATIVE · NOT TO SCALE
Roof structure repairs: purlin and struts added, roof spread tied in. Indicative drawing, not to scale.

Do you need approval for roof structure repairs in Scotland?

In Scotland, underpinning and other structural alterations generally need a building warrant from the council’s building standards service before work starts, and a completion certificate at the end; small like-for-like repairs often do not. There is no Party Wall Act in Scotland; shared walls are covered by title deeds and, for flats, the Tenements (Scotland) Act 2004.

Find roof structure repairs in your Ayrshire town

Questions about roof structure repairs in Ayrshire

Why do houses in Ayrshire crack?

Ayrshire has a large coalfield, especially in the east around Kilmarnock and Cumnock, with recorded workings, and raised-beach sands and gravels along the coast. Historic coal workings are recorded beneath parts of Ayrshire, and a coal mining search is worth checking where movement is unexplained. Only an investigation on site can say why a particular building has moved.

How much will roof structure repairs cost in Ayrshire?

On Scotland rates, roof structure repairs starts from about £285 per rafter, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.

Can the roof be strengthened without removing the tiles?

In most cases, yes. Doubling rafters, adding struts and fitting ties can all be done from inside the loft with the coverings in place. Tiles usually only come off where timber near the eaves is badly decayed, or the roof is being re-covered anyway.

Is a sagging roof ridge dangerous?

A slight, even dip in an old roof is often historic movement that stopped long ago. A sag that is getting worse, cracking timbers, walls pushing out at the eaves or recently removed struts should be checked soon. Avoid storing heavy items in the loft until then.

Do I need a structural engineer for roof repairs?

For like-for-like repairs to a few rafters, often not. Where purlins, struts or ties are being redesigned, the covering is getting heavier or the walls are being pushed out, you usually do. Where the repair needs an engineer’s design or sign-off, an independent chartered structural engineer is appointed, and we can arrange this.

Related work in Ayrshire

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote