Kent · England
Resin injection ground stabilisation in Kent
Resin injection ground stabilisation in Kent starts with the ground. Much of Kent sits on clay that shrinks in dry summers and swells in wet winters, and the buildings here are mostly Victorian terraces in the Medway towns, so the repair has to suit both.
Guide price from£895per metre of wall treated inc VAT
- Area
- Kent
- Pricing region
- South East
- Ground
- Shrinkable clay widespread
- Towns listed
- 22
What should you know about the ground under Kent?
North Kent sits on London Clay, central Kent on Gault and Weald Clays and the Downs on chalk, so shrinkable clay is widespread. East Kent around Deal and Dover had a small deep coalfield, worked until the late 1980s.
Parts of Kent lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Across Kent, most homes are Victorian terraces in the Medway towns, weatherboarded and Wealden houses, 1930s semis and seaside bungalows.
What happens when we carry out resin injection ground stabilisation in Kent?
Is resin suitable?
Send photos and any reports you hold. We give a free initial assessment, and an independent engineer then checks soil type, depth to firm ground and the cause. We can arrange the engineer. Clay and tree problems need particular care.
Ground and drain checks
Trial pits or probes confirm the soil profile, and a CCTV drain survey checks for leaks and for pipes in the injection zone. Damaged drains are repaired first, so resin is not lost into them or used to treat a cause that is still active.
Injection day
Holes are drilled, tubes placed and resin injected in stages while laser levels on the wall are watched for any rise. Most domestic jobs are done from outside, with little mess. Holes are filled and joints made good at the end.
Signs you may need resin injection ground stabilisation
- Floor slab dropping or hollow-sounding near one external wall
- Cracks over a section of wall built on loose fill
- Sinking that trial pits trace to loose or washed-out soil
- Gaps opening beneath a ground-floor slab or path
How much will resin injection ground stabilisation cost in Kent?
The ranges below reflect typical South East costs for resin injection ground stabilisation, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Resin injection ground stabilisation | £895 – £1,700 | per metre of wall treated |
| Typical domestic project | £5,600 – £16,800 | per project |
| Level monitoring after treatmentest. | £390 – £1,000 | per programme |
Which repair method suits a home in Kent?
Slab void filling and lifting
Small holes are drilled through the floor, and resin is fed into the void between the slab and the fill. As it expands it fills the gap and can lift the slab by small, controlled amounts. Floor coverings are lifted locally and the holes filled afterwards.
Best for: Sunken concrete ground floors and garage slabs
Resin alongside other repairs
Injection often forms one part of a wider scheme: drains repaired first, resin under the affected section, then crack stitching and making good once readings settle. On a mixed site, one wall may suit resin while another needs conventional underpinning instead.
Best for: Localised settlement within a broader subsidence repair
Injection beneath strip footings
Holes are drilled at close spacing along the wall, and tubes are placed at one or more depths below the footing. Resin is injected in stages from the bottom up, building a stiffened zone of ground under the wall while levels are read continuously.
Best for: Settled walls on loose or washed-out soil at shallow depth
Do you need approval for resin injection ground stabilisation in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Find resin injection ground stabilisation in your Kent town
- Maidstone
- Gillingham
- Tunbridge Wells
- Folkestone
- Margate
- Ashford
- Canterbury
- Sittingbourne
- Gravesend
- Dartford
- Ramsgate
- Dover
- Tonbridge
- Strood
- Whitstable
- Deal
- Sevenoaks
- Herne Bay
- Faversham
- Swanley
- Longfield
- Swanscombe
Resin injection ground stabilisation in Kent: questions and answers
Why do houses in Kent crack?
North Kent sits on London Clay, central Kent on Gault and Weald Clays and the Downs on chalk, so shrinkable clay is widespread. East Kent around Deal and Dover had a small deep coalfield, worked until the late 1980s. Parts of Kent lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Only an investigation on site can say why a particular building has moved.
How much will resin injection ground stabilisation cost in Kent?
On South East rates, resin injection ground stabilisation starts from about £895 per metre of wall treated, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Is the resin harmful to the ground or drains?
Once cured, the resin is inert in the ground. The practical risk is resin travelling into a damaged drain or service duct, which is why a CCTV drain survey comes first and any defects are repaired before injection. Services near the treated zone are located and protected.
Is resin injection better than underpinning?
It is better for some jobs and unsuitable for others. Resin is quicker and less disruptive where the problem is loose or washed-out soil close to the footing. Underpinning or mini-piles are usually the safer choice for deep soft ground or clay dried by trees that cannot be removed.
Can resin injection lift my house back to level?
It can produce small, controlled lifts, but it is not a way to jack a house back to its original position. The main aim is to stabilise the ground. Laser levels are watched throughout so injection stops before the lift strains the walls or opens new cracks.