Edinburgh and the Lothians · Scotland
Resin injection ground stabilisation in Edinburgh and the Lothians
Resin injection ground stabilisation in Edinburgh and the Lothians starts with the ground. Most of Edinburgh and the Lothians is on firmer ground than the clay belts of the south-east, and the buildings here are mostly sandstone tenements and Georgian terraces, so the repair has to suit both.
Guide price from£760per metre of wall treated inc VAT
- Area
- Edinburgh and the Lothians
- Pricing region
- Scotland
- Ground
- Mostly firmer ground
- Towns listed
- 12
Why does the ground in Edinburgh and the Lothians matter for resin injection ground stabilisation?
Edinburgh is volcanic and sedimentary rock with glacial till, while the Midlothian and East Lothian coalfields and oil-shale workings in West Lothian have left recorded mine workings and bings.
Parts of Edinburgh and the Lothians lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Across Edinburgh and the Lothians, most homes are sandstone tenements and Georgian terraces, miners' rows, bungalows and post-war estates.
Signs you may need resin injection ground stabilisation
- A corner that has dropped but no longer moves with the seasons
- Settlement after a drain leak has been found and repaired
- Cracks over a section of wall built on loose fill
- Sinking that trial pits trace to loose or washed-out soil
How much will resin injection ground stabilisation cost in Edinburgh and the Lothians?
These are guide prices for Edinburgh and the Lothians, using Scotland rates and including VAT. Your written quote follows photos or a survey, and is fixed once the repair is specified.
| Item | Guide price | Per |
|---|---|---|
| Resin injection ground stabilisation | £760 – £1,400 | per metre of wall treated |
| Typical domestic project | £4,750 – £14,200 | per project |
| Level monitoring after treatmentest. | £330 – £855 | per programme |
Which repair method suits a home in Edinburgh and the Lothians?
Injection beneath strip footings
Holes are drilled at close spacing along the wall, and tubes are placed at one or more depths below the footing. Resin is injected in stages from the bottom up, building a stiffened zone of ground under the wall while levels are read continuously.
Best for: Settled walls on loose or washed-out soil at shallow depth
Slab void filling and lifting
Small holes are drilled through the floor, and resin is fed into the void between the slab and the fill. As it expands it fills the gap and can lift the slab by small, controlled amounts. Floor coverings are lifted locally and the holes filled afterwards.
Best for: Sunken concrete ground floors and garage slabs
Resin alongside other repairs
Injection often forms one part of a wider scheme: drains repaired first, resin under the affected section, then crack stitching and making good once readings settle. On a mixed site, one wall may suit resin while another needs conventional underpinning instead.
Best for: Localised settlement within a broader subsidence repair
What happens when we carry out resin injection ground stabilisation in Edinburgh and the Lothians?
Ground and drain checks
Trial pits or probes confirm the soil profile, and a CCTV drain survey checks for leaks and for pipes in the injection zone. Damaged drains are repaired first, so resin is not lost into them or used to treat a cause that is still active.
Injection day
Holes are drilled, tubes placed and resin injected in stages while laser levels on the wall are watched for any rise. Most domestic jobs are done from outside, with little mess. Holes are filled and joints made good at the end.
Level monitoring
Readings after treatment show whether the ground is holding. Once they are steady, cracks are stitched and redecoration can follow. If a section keeps moving, the engineer decides whether further injection or a different method is needed.
Do you need approval for resin injection ground stabilisation in Scotland?
In Scotland, underpinning and other structural alterations generally need a building warrant from the council’s building standards service before work starts, and a completion certificate at the end; small like-for-like repairs often do not. There is no Party Wall Act in Scotland; shared walls are covered by title deeds and, for flats, the Tenements (Scotland) Act 2004.
Find resin injection ground stabilisation in your Edinburgh and the Lothians town
- Edinburgh
- Livingston
- Musselburgh
- Bathgate
- Bonnyrigg
- Penicuik
- Broxburn
- Mayfield
- Linlithgow
- Armadale
- Tranent
- Dunbar
Resin injection ground stabilisation in Edinburgh and the Lothians: questions and answers
Why do houses in Edinburgh and the Lothians crack?
Edinburgh is volcanic and sedimentary rock with glacial till, while the Midlothian and East Lothian coalfields and oil-shale workings in West Lothian have left recorded mine workings and bings. Parts of Edinburgh and the Lothians lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Only an investigation on site can say why a particular building has moved.
How much will resin injection ground stabilisation cost in Edinburgh and the Lothians?
On Scotland rates, resin injection ground stabilisation starts from about £760 per metre of wall treated, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
How do I know if my house is suitable?
An engineer decides, based on the soil type, the depth to firm ground and the cause of movement. Send us photos and any reports for a free initial assessment. We will say honestly if resin looks unlikely to suit and a different repair is worth considering.
Can resin injection lift my house back to level?
It can produce small, controlled lifts, but it is not a way to jack a house back to its original position. The main aim is to stabilise the ground. Laser levels are watched throughout so injection stops before the lift strains the walls or opens new cracks.
Is resin injection better than underpinning?
It is better for some jobs and unsuitable for others. Resin is quicker and less disruptive where the problem is loose or washed-out soil close to the footing. Underpinning or mini-piles are usually the safer choice for deep soft ground or clay dried by trees that cannot be removed.