Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Renfrewshire and Inverclyde · Scotland

Mining subsidence repairs in Renfrewshire and Inverclyde

Renfrewshire and Inverclyde has its own mix of ground and building types, and that shapes how mining subsidence repairs is done here. Most of Renfrewshire and Inverclyde is on firmer ground than the clay belts of the south-east.

Guide price from£75per metre of crack inc VAT

Stone terraced houses in a former coalfield town, one with a long crack in its render
Area
Renfrewshire and Inverclyde
Pricing region
Scotland
Ground
Mostly firmer ground
Towns listed
9

What should you know about the ground under Renfrewshire and Inverclyde?

Renfrewshire has glacial till and Clyde alluvium with coal workings recorded in parts, while Inverclyde's towns climb steep slopes above the Clyde with many retaining walls.

Parts of Renfrewshire and Inverclyde lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Typical buildings in Renfrewshire and Inverclyde: Sandstone tenements, villas in East Renfrewshire, and post-war estates.

Symptoms that point to mining subsidence repairs

  • A dip, hollow or hole opening in the garden or drive
  • Steps or ridges forming in paths, kerbs or garden walls
  • Cracks running through the foundations and up both faces of a wall
  • Damage that does not change with the seasons

Guide prices for mining subsidence repairs in Renfrewshire and Inverclyde

Prices in Renfrewshire and Inverclyde are worked out on Scotland rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.

Guide prices inc VAT on Scotland rates. Items marked est. are our estimates.
ItemGuide pricePer
Crack stitching and making good£75 – £170per metre of crack
Re-levelling or ground stabilisation by resin injection£760 – £1,400per metre of wall
Underpinning where the engineer specifies it£950 – £3,300per metre of wall
Repair schedule for a claim (pricing an engineer's scope)est.Free to request—

Methods for mining subsidence repairs

Underpinning to sound ground

Where the engineer specifies it, foundations are taken down by mass concrete, beam-and-base or mini-piles to ground that will not move further. On mining sites the design often follows grouting of old workings so the new foundation sits above a stable mass.

Best for: Ongoing movement or damage beyond what crack repairs can hold

Ground stabilisation by resin injection

For localised settlement in the upper soil layers, expanding resin can be injected beneath the footings to firm the ground and sometimes reduce a small tilt. It is not suitable for large voids deep below, which need grouting or other specialist treatment first.

Best for: Shallow settlement once deeper voids are ruled out or treated

Crack stitching and making good

Where the ground has stopped moving and the damage is cracking, the walls are stitched with stainless helical bars, repointed and replastered. This covers a large share of mining damage, especially legacy movement that settled years ago and left cracks behind.

Best for: Cracking after movement that has now stopped

From first photo to finished repair

  1. Check the mining record

    A coal mining report or a search of mining records shows whether recorded workings or shafts lie near the property. Records are incomplete, so a clear report does not rule mining out, and a recorded seam nearby does not prove it is the cause.

  2. Written price to the scope

    We price the repair from the engineer’s or claim schedule and confirm a fixed price in writing once the work is specified. Where a claim body or insurer is handling the repair, their own process for appointing contractors applies.

  3. Repairs and records

    Work proceeds once any ground treatment is complete and the engineer is satisfied. We stitch, stabilise or underpin as specified, make good inside and out, deal with building control where needed, and hand over records for your file.

Mining subsidence: settlement over old shallow mine workingsOLD COAL WORKINGSPILLARS LEFT TO SUPPORT ROOFSETTLEMENTINDICATIVE · NOT TO SCALE
Mining subsidence: settlement over old shallow mine workings. Indicative drawing, not to scale.

Do you need approval for mining subsidence repairs in Scotland?

In Scotland, underpinning and other structural alterations generally need a building warrant from the council’s building standards service before work starts, and a completion certificate at the end; small like-for-like repairs often do not. There is no Party Wall Act in Scotland; shared walls are covered by title deeds and, for flats, the Tenements (Scotland) Act 2004.

Towns in Renfrewshire and Inverclyde we cover for mining subsidence repairs

Frequently asked questions

Is the ground in Renfrewshire and Inverclyde prone to subsidence?

Renfrewshire has glacial till and Clyde alluvium with coal workings recorded in parts, while Inverclyde's towns climb steep slopes above the Clyde with many retaining walls. Parts of Renfrewshire and Inverclyde lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Only an investigation on site can say why a particular building has moved.

How much will mining subsidence repairs cost in Renfrewshire and Inverclyde?

On Scotland rates, mining subsidence repairs starts from about £75 per metre of crack, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.

How do I make a mining subsidence claim?

Start by reporting the damage to the Mining Remediation Authority, describing when it appeared and including photographs. They will usually arrange an inspection and investigation. Report promptly, because time limits can apply. Keep copies of everything you send, and notify your home insurer in parallel.

Is my house affected by mining because it is on a coalfield?

Not necessarily. Many homes on coalfields have no mining-related damage at all, and cracks there can still come from clay, trees or drains. A coal mining report shows recorded workings nearby, and an engineer’s inspection is needed to link damage to mining.

Can mining subsidence start again years later?

It can, particularly over shallow workings or old shafts, where collapse can happen long after mining ended. Movement from deep longwall mining generally settled within a few years of extraction. An engineer can judge whether current damage is old, settled cracking or new movement.

Other structural repairs in Renfrewshire and Inverclyde

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote