Buckinghamshire · England
Lintel replacement in Buckinghamshire
Homes in Buckinghamshire are mostly market-town terraces. That matters for lintel replacement: footings, wall construction and mortar all vary with the age of the building. Shrinkable clay is widespread in Buckinghamshire.
Guide price from£840per opening inc VAT
- Area
- Buckinghamshire
- Pricing region
- South East
- Ground
- Shrinkable clay widespread
- Towns listed
- 9
What should you know about the ground under Buckinghamshire?
The Chilterns are chalk with clay-with-flints on the tops, while the Vale of Aylesbury and Milton Keynes sit on Gault, Kimmeridge and Oxford Clays and glacial till. The vale clays are prone to seasonal shrinkage near trees.
Ground movement here is more often linked to soils, drains and trees than to mining. Across Buckinghamshire, most homes are market-town terraces, 1930s semis in the south, and large late-20th-century estates in Milton Keynes and Aylesbury.
Signs you may need lintel replacement
- Rust stains or flaking steel showing above the frame
- Soft, crumbly timber visible behind the brick face over a bay
- Damp patches on the inside wall just above a window
- Brickwork above an opening visibly dipping in the middle
How much will lintel replacement cost in Buckinghamshire?
Guide prices below are for homes in Buckinghamshire, on South East rates and including VAT. A survey or good photos let us turn them into a fixed written price.
| Item | Guide price | Per |
|---|---|---|
| Standard window or door opening | £840 – £2,800 | per opening |
| Wide or bay openingest. | £2,250 – £5,050 | per opening |
| Making good inside and outest. | £170 – £670 | per opening |
Which repair method suits a home in Buckinghamshire?
Propping and needling
Adjustable props carry the wall above while the old lintel comes out. For heavier walls, short steel needles are passed through holes cut above the opening and propped on both sides, taking the load off the lintel completely. The supports stay until the new work has set.
Best for: Openings with heavy walls, upper floors or bay windows above
Replacement with a cavity tray
A damp-proof membrane is laid over the new lintel with stop ends and weep holes, so water running down the cavity is directed out rather than into the house. Many older lintels were installed without one, which is often why they failed.
Best for: Cavity walls with damp above windows
Like-for-like replacement
The failed lintel comes out and one of suitable type and size is bedded on mortar with adequate bearing at each end. Bricks above are relaid to match the original bond and the joints are pointed to blend with the surrounding wall.
Best for: Standard windows and doors with a single failed lintel
What happens when we carry out lintel replacement in Buckinghamshire?
Specify the replacement
We confirm the lintel type, length and bearing needed. For wide openings, bays or walls with unusual loads, an engineer may specify it, and where the repair needs an engineer’s design or sign-off we can arrange one.
Support the wall
Props or needles are set so the brickwork above carries no load on the old lintel. Windows are protected or temporarily removed where the work demands it, and the room inside is sheeted against dust.
Remove and replace
Brickwork is carefully taken out above the lintel, the old lintel removed and the new one bedded level on full bearings. A cavity tray goes in where relevant, then the brickwork above is relaid.
Do you need approval for lintel replacement in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Towns in Buckinghamshire we cover for lintel replacement
Lintel replacement in Buckinghamshire: questions and answers
Is the ground in Buckinghamshire prone to subsidence?
The Chilterns are chalk with clay-with-flints on the tops, while the Vale of Aylesbury and Milton Keynes sit on Gault, Kimmeridge and Oxford Clays and glacial till. The vale clays are prone to seasonal shrinkage near trees. Ground movement here is more often linked to soils, drains and trees than to mining. Only an investigation on site can say why a particular building has moved.
How much will lintel replacement cost in Buckinghamshire?
On South East rates, lintel replacement starts from about £840 per opening, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Do I need building regulations approval to replace a lintel?
In England and Wales, replacing a lintel is structural work and building control will usually need to approve it. Rules differ in Scotland and Northern Ireland. We deal with building control where the work needs it, and include the cost in the quote.
How long does it take to replace a lintel?
Most single lintels are replaced in one to two days. The props stay in until the mortar has gained enough strength, and wide bays or openings with both inner and outer lintels can take longer. The window can usually be used again once the supports come out.
What is a cavity tray and do I need one?
A cavity tray is a damp-proof membrane above a lintel that catches water running down inside a cavity wall and sends it out through weep holes. If your wall is cavity construction and the original lintel had no tray, fitting one with the new lintel is usually sensible.