Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Worcestershire · England

Extension pulling away repairs in Worcestershire

Looking for extension pulling away repairs in Worcestershire? Send us photos for a free initial view. Clay soils are found in parts of Worcestershire, so we look at the ground, drains and nearby trees before recommending anything.

Guide price from£600per junction inc VAT

Rear brick extension with a tapered crack at the joint with the house
Area
Worcestershire
Pricing region
West Midlands
Ground
Clay in parts
Towns listed
8

What is the ground like in Worcestershire?

Worcestershire is largely Mercia Mudstone (locally called marl) and Lias clay, with the Malvern Hills in the west. The clays can shrink in dry summers, especially near large trees.

Ground movement here is more often linked to soils, drains and trees than to mining. Typical buildings in Worcestershire: Timber-framed and brick houses, Victorian villas in Malvern, and post-war estates in Redditch and Worcester.

What to look for before calling about extension pulling away repairs

  • Mastic or render at the joint repeatedly splitting open
  • Extension roof flashing lifting off the original wall
  • Patio doors or windows in the extension starting to bind
  • Floor level dropping where the extension and house floors meet

Extension pulling away repairs prices in Worcestershire

Prices in Worcestershire are worked out on West Midlands rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.

Guide prices inc VAT on West Midlands rates. Items marked est. are our estimates.
ItemGuide pricePer
Junction crack repair with stainless tiesest.£600 – £2,000per junction
Movement joint and making goodest.£400 – £1,200per junction
Underpinning the extension where needed£1,000 – £2,500per metre of wall

How we usually approach extension pulling away repairs

Movement joint and making good

Where some seasonal movement is expected to continue, the junction is formed into a proper flexible movement joint with a compressible filler and sealant, so the two parts can move without cracking. Flashings and internal finishes are detailed to suit.

Best for: Minor ongoing movement that does not threaten the structure

Junction crack repair with stainless ties

The open joint is cut out, stainless ties or helical bars are fixed across it into both the old and new masonry, and the joint is repointed or rendered to match. Inside, the corner is replastered. This suits extensions that moved once and have since stopped.

Best for: Settled extensions with a stable gap at the junction

Underpinning the extension

If the extension is still dropping because its footings are too shallow or on poor ground, they are taken deeper by mass concrete, beam-and-base or mini-piles. The engineer designs the scheme, and the junction is repaired once the new foundation is in.

Best for: Active movement from shallow footings, roots or soft ground

What happens during extension pulling away repairs, step by step?

  1. Show us the junction

    Send photos of the crack outside, the internal corner and any flashing above, with a measure for scale. We give a free initial assessment and an initial view on whether the gap is likely old or still opening.

  2. Find what is moving

    An independent chartered structural engineer can inspect, and we can arrange one. A drain survey under the extension, a trial pit at its footing and tell-tale monitoring across the joint are common checks before choosing the repair.

  3. Repair the junction

    Drains are repaired first if they are leaking. The joint is then tied, formed as a movement joint or rebuilt after underpinning, with roof flashings reset so the junction stays watertight. Building control is handled where needed.

Extension pulling away: tapered gap at the junction tied in with stainless barsTAPERED GAPTIES ACROSS JOINTSHALLOWER FOOTINGINDICATIVE · NOT TO SCALE
Extension pulling away: tapered gap at the junction tied in with stainless bars. Indicative drawing, not to scale.

Do you need approval for extension pulling away repairs in England?

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Find extension pulling away repairs in your Worcestershire town

Questions about extension pulling away repairs in Worcestershire

Why do houses in Worcestershire crack?

Worcestershire is largely Mercia Mudstone (locally called marl) and Lias clay, with the Malvern Hills in the west. The clays can shrink in dry summers, especially near large trees. Ground movement here is more often linked to soils, drains and trees than to mining. Only an investigation on site can say why a particular building has moved.

How much will extension pulling away repairs cost in Worcestershire?

On West Midlands rates, extension pulling away repairs starts from about £600 per junction, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.

What is a movement joint?

A movement joint is a deliberate, flexible break in a wall that lets two parts of a building move slightly without cracking. It is filled with a compressible material and sealed. At an extension junction it can replace a rigid joint that keeps cracking.

Is it normal for an extension to crack at the join?

A fine crack at the junction is fairly common, especially in the first few years as a new extension settles. It becomes a concern when the gap is widening, tapering, letting in water or matched by sticking doors and sloping floors. Those signs point to continuing movement.

Will my extension need underpinning?

Often not. Many separating extensions are fixed by repairing a drain, tying the junction or forming a movement joint. Underpinning is for extensions that keep dropping because their footings are too shallow or the ground beneath is poor, as shown by monitoring.

Related work in Worcestershire

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote