Horsham · West Sussex
Crack stitching in Horsham
Crack stitching in Horsham is a tidy way to reconnect brickwork that has split, without taking the wall down. We set stainless helical bars into the mortar joints across the crack, then point over them so the repair blends in.
Guide price from£90per metre of crack inc VAT
- Postcodes
- RH12
- Population
- about 51,000
- Area
- West Sussex
- Pricing region
- South East
What should you know about the ground under Horsham?
Postcode districts RH12 cover Horsham, a West Sussex town of about 51,000 people. Neighbouring towns we cover: Crawley (7 miles), Horley (11 miles) and Haywards Heath (11 miles).
Shrinkable clay is widespread in West Sussex. Ground movement here is more often linked to soils, drains and trees than to mining. Across West Sussex, most homes are Wealden cottages, 1930s semis and bungalows on the coast, and new-town estates in Crawley.
Is it time for crack stitching? Common signs
- Filled cracks that keep reopening along the same line
- Cracking that a surveyor or engineer has said is now stable
- Stepped cracking beside a window, door or corner
What should you budget for crack stitching in Horsham?
The ranges below reflect typical South East costs for crack stitching, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Crack stitching with stainless helical bars | £90 – £200 | per metre of crack |
| Small jobs (minimum visit)est. | £390 – £560 | per visit |
| Repointing over the stitched line in matching mortarest. | £35 – £65 | per metre |
Repair options we may recommend
Stitching with crack injection
Once the bars are in, the crack itself is filled. Fine cracks are pointed in matching mortar, while wider or deeper cracks can be injected with grout so the void inside the wall is filled rather than just the face. On older houses, lime mortar keeps the repair breathable.
Best for: Deep cracks running through the full thickness of the wall
Helical bars in resin grout
A resin grout bonds quickly and strongly to the bar and masonry and suits wet conditions or work that must take load sooner. It is less forgiving of soft or crumbly bricks, so the choice of grout is made wall by wall rather than as a rule.
Best for: Dense bricks, damp walls and repairs needing a fast cure
What to expect when we carry out crack stitching
Set out the bars
Bar positions are marked across the crack, typically every few courses up its full height, with each bar extending well into sound brickwork on both sides. An engineer’s specification, where there is one, sets the exact spacing and length.
Repoint to match
The cut joints and crack are pointed in a mortar chosen to match the colour, texture and strength of the existing work. On older houses with soft bricks, a lime mortar is used so the repair does not trap moisture.
Make good and record
Internal plaster cracks are cut out and filled where included, and dust is cleared. You receive a short note of where the bars went, which is useful for future buyers, surveyors and any insurance file.
Rules for crack stitching in England
Like-for-like repairs such as crack stitching and repointing do not usually need building control approval in England, but anything that changes or strengthens the structure, such as underpinning or rebuilding a wall, does. If the work touches a party wall, the Party Wall etc. Act 1996 may apply.
Your crack stitching questions
How much will crack stitching cost in Horsham?
Guide prices for crack stitching in Horsham start from about £90 per metre of crack, including VAT, on South East rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you cover Horsham?
Yes, Horsham is covered, along with postcode districts RH12. We also cover nearby Crawley and Horley.
Is the ground in West Sussex prone to subsidence?
North West Sussex around Crawley and Horsham sits on Weald Clay, the South Downs are chalk, and the coastal plain has brickearth and gravels. The Weald Clay is prone to shrink-swell movement near trees. Only an investigation can say why a particular building has moved.
Can I stitch a crack myself?
It is possible on a small, stable crack, but the work involves cutting into joints with a twin-blade cutter, controlling silica dust and placing the bars correctly. If the crack is part of an insurance claim or is wide, have it assessed first, because a poor repair can hide ongoing movement.
How far apart are helical bars placed?
Helical bars are usually placed every few courses up the full height of the crack, each one running well past the crack into sound brickwork. Spacing and bar length depend on the wall and the crack width, and where an engineer has specified the repair, their drawing sets them.
Other structural repairs in Horsham
Crack stitching near Horsham
Unsure whether a crack in Horsham has stopped moving? Pictures with the date on them, taken over a few weeks, help us advise before any bars go in.