Kent · England
Crack stitching in Kent
We carry out crack stitching across Kent, from the larger towns to smaller places nearby. Much of Kent sits on clay that shrinks in dry summers and swells in wet winters. Every job starts with the cause, then the repair is specified to match it.
Guide price from£90per metre of crack inc VAT
- Area
- Kent
- Pricing region
- South East
- Ground
- Shrinkable clay widespread
- Towns listed
- 22
Why does the ground in Kent matter for crack stitching?
North Kent sits on London Clay, central Kent on Gault and Weald Clays and the Downs on chalk, so shrinkable clay is widespread. East Kent around Deal and Dover had a small deep coalfield, worked until the late 1980s.
Parts of Kent lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Housing stock in Kent: Victorian terraces in the Medway towns, weatherboarded and Wealden houses, 1930s semis and seaside bungalows.
What should you budget for crack stitching in Kent?
For Kent we use South East rates. Treat the table as a budget guide, inc VAT; the price you pay is the one on your written quote.
| Item | Guide price | Per |
|---|---|---|
| Crack stitching with stainless helical bars | £90 – £200 | per metre of crack |
| Small jobs (minimum visit)est. | £390 – £560 | per visit |
| Repointing over the stitched line in matching mortarest. | £35 – £65 | per metre |
Repair options we may recommend
Helical bars in resin grout
A resin grout bonds quickly and strongly to the bar and masonry and suits wet conditions or work that must take load sooner. It is less forgiving of soft or crumbly bricks, so the choice of grout is made wall by wall rather than as a rule.
Best for: Dense bricks, damp walls and repairs needing a fast cure
Helical bars in cementitious grout
The most common approach. A slot is cut along the bed joint with a twin-blade cutter, flushed out and part filled with a cement-based grout. The helical bar is pushed in, more grout is packed over it, and the joint is pointed to match. The grout cures over a few days.
Best for: Most brick and block walls, including older softer bricks
Stitching with crack injection
Once the bars are in, the crack itself is filled. Fine cracks are pointed in matching mortar, while wider or deeper cracks can be injected with grout so the void inside the wall is filled rather than just the face. On older houses, lime mortar keeps the repair breathable.
Best for: Deep cracks running through the full thickness of the wall
What to expect when we carry out crack stitching
Set out the bars
Bar positions are marked across the crack, typically every few courses up its full height, with each bar extending well into sound brickwork on both sides. An engineer’s specification, where there is one, sets the exact spacing and length.
Repoint to match
The cut joints and crack are pointed in a mortar chosen to match the colour, texture and strength of the existing work. On older houses with soft bricks, a lime mortar is used so the repair does not trap moisture.
Make good and record
Internal plaster cracks are cut out and filled where included, and dust is cleared. You receive a short note of where the bars went, which is useful for future buyers, surveyors and any insurance file.
Is it time for crack stitching? Common signs
- Cracking that a surveyor or engineer has said is now stable
- Filled cracks that keep reopening along the same line
- Bricks split clean through where the crack crosses them
- A crack visible on both the inside and outside face of the wall
Do you need approval for crack stitching in England?
Like-for-like repairs such as crack stitching and repointing do not usually need building control approval in England, but anything that changes or strengthens the structure, such as underpinning or rebuilding a wall, does. If the work touches a party wall, the Party Wall etc. Act 1996 may apply.
Towns in Kent we cover for crack stitching
- Maidstone
- Gillingham
- Tunbridge Wells
- Folkestone
- Margate
- Ashford
- Canterbury
- Sittingbourne
- Gravesend
- Dartford
- Ramsgate
- Dover
- Tonbridge
- Strood
- Whitstable
- Deal
- Sevenoaks
- Herne Bay
- Faversham
- Swanley
- Longfield
- Swanscombe
Your crack stitching questions
Is the ground in Kent prone to subsidence?
North Kent sits on London Clay, central Kent on Gault and Weald Clays and the Downs on chalk, so shrinkable clay is widespread. East Kent around Deal and Dover had a small deep coalfield, worked until the late 1980s. Parts of Kent lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Only an investigation on site can say why a particular building has moved.
How much will crack stitching cost in Kent?
On South East rates, crack stitching starts from about £90 per metre of crack, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
How far apart are helical bars placed?
Helical bars are usually placed every few courses up the full height of the crack, each one running well past the crack into sound brickwork. Spacing and bar length depend on the wall and the crack width, and where an engineer has specified the repair, their drawing sets them.
Will crack stitching be visible afterwards?
Usually only slightly, because the bars sit inside the mortar joints and are pointed over. The main giveaway is the colour of new mortar, which can take a few months to weather. Careful mortar matching keeps the line discreet, especially on older brickwork.
How long does crack stitching last?
Stainless steel bars do not rust, so a stitched repair in a stable wall should last as long as the surrounding brickwork. The repair only fails early when the wall keeps moving, which is why the cause is dealt with before the bars go in.