Northamptonshire · England
Chimney stack repairs in Northamptonshire
We carry out chimney stack repairs across Northamptonshire, from the larger towns to smaller places nearby. Northamptonshire is one of the parts of the UK where clay soils are most likely to move with the seasons. Every job starts with the cause, then the repair is specified to match it.
Guide price from£490per stack inc VAT
- Area
- Northamptonshire
- Pricing region
- East Midlands
- Ground
- Shrinkable clay widespread
- Towns listed
- 6
Why does the ground in Northamptonshire matter for chimney stack repairs?
Northamptonshire sits largely on Lias clay and Jurassic ironstones and limestones, with historic ironstone quarrying around Corby and Kettering. The clay vales are prone to shrinkage near trees.
Historic ironstone working has left disturbed ground in places. What you mostly find across Northamptonshire: ironstone and limestone cottages, Victorian terraces in Northampton and Kettering, and new-town estates in Corby.
What to expect when we carry out chimney stack repairs
Look from the ground
Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.
Check what is below
We ask whether any chimney breasts have been removed, and check the loft and rooms below for cracking. If a breast has gone without proper support, we recommend an independent chartered structural engineer before any stack work.
Repair, restrain or rebuild
The agreed work is carried out: repointing, new flaunching and pots, restraint, or taking the stack down and rebuilding it. Lead flashings where the stack meets the roof are checked and renewed if needed.
Is it time for chimney stack repairs? Common signs
- Damp patches on the chimney breast inside, especially after rain
- Cracked or missing flaunching around the top of the stack
- Mortar washed out of joints, leaving bricks standing proud
- Chimney pots that are loose, tilted or cracked at the base
What should you budget for chimney stack repairs in Northamptonshire?
The ranges below reflect typical East Midlands costs for chimney stack repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Repointing, flaunching and minor brick repairs | £490 – £1,950 | per stack |
| Partial or full stack rebuild | £2,950 – £9,800 | per stack |
| Stack restraint or strappingest. | £390 – £1,200 | per stack |
Repair options we may recommend
Stack restraint or strapping
A stack that has leaned slightly but is otherwise sound can be restrained with stainless straps or ties fixed back to the roof structure or the gable. This stops further movement without taking the stack down, and is often combined with repointing.
Best for: Slightly leaning stacks with sound brickwork
Repointing and brick repairs
Eroded joints are raked out and repointed in a mortar suited to the brick, often a lime-based mix on older stacks. Spalled or cracked bricks are cut out and replaced with matched reclaimed or new bricks. On many stacks this, with new flaunching, is all that is needed.
Best for: Upright stacks with weathered joints and some damaged bricks
Flaunching and pot resetting
Old cracked flaunching is broken out, pots are lifted and reset or replaced, and new flaunching is formed to a fall so water runs off. Unused flues can be capped with ventilated caps, which keeps rain out while letting the flue breathe.
Best for: Loose pots and cracked mortar at the top of the stack
Do you need approval for chimney stack repairs in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Chimney stack repairs near you in Northamptonshire
Your chimney stack repairs questions
Does the ground around Northampton cause cracking?
Northamptonshire sits largely on Lias clay and Jurassic ironstones and limestones, with historic ironstone quarrying around Corby and Kettering. The clay vales are prone to shrinkage near trees. Historic ironstone working has left disturbed ground in places. Only an investigation on site can say why a particular building has moved.
How much will chimney stack repairs cost in Northamptonshire?
On East Midlands rates, chimney stack repairs starts from about £490 per stack, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
What is chimney flaunching?
Flaunching is the sloped bed of mortar on top of a chimney stack that holds the pots in place and throws rainwater off. When it cracks, water gets into the stack and pots can work loose. Renewing it is one of the most common stack repairs.
Can a leaning stack be straightened?
Not by pushing it back, because the brickwork would crack. A slight lean on a sound stack can be restrained so it moves no further. A pronounced lean is fixed by taking the stack down to sound masonry and rebuilding it plumb.
Is a leaning chimney dangerous?
A leaning chimney can become dangerous, because stacks are heavy and stand high above the roof. A slight, long-standing lean may be stable for now, but a lean that is worsening, or loose bricks and pots, should be looked at quickly. Keep people away from below if anything looks loose.