Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Hull · East Riding of Yorkshire

Chimney stack repairs in Hull

If a pot or a piece of brickwork has fallen from a stack at your Hull property, keep everyone clear of the drop zone. Photograph what you can from the ground, and we will advise on securing the stack and repairing it properly.

Guide price from£475per stack inc VAT

Brick chimney stack being rebuilt with new flaunching on a slate roof
Postcodes
HU1, HU2, HU3, HU4, HU5
Population
about 310,000
Area
East Riding of Yorkshire
Pricing region
Yorkshire and the Humber

What should you know about the ground under Hull?

Hull, East Riding of Yorkshire: about 310,000 residents across postcode districts HU1, HU2, HU3, HU4, HU5. We also take enquiries from nearby Beverley (8 miles), Goole (22 miles) and Bridlington (24 miles).

East Riding of Yorkshire has a mix of ground, with clay in some places and firmer rock in others. Ground movement here is more often linked to soils, drains and trees than to mining. Typical buildings in East Riding of Yorkshire: Victorian terraces in Hull, market-town houses in Beverley and Driffield, and post-war estates.

Which repair method suits a home in Hull?

Repointing and brick repairs

Eroded joints are raked out and repointed in a mortar suited to the brick, often a lime-based mix on older stacks. Spalled or cracked bricks are cut out and replaced with matched reclaimed or new bricks. On many stacks this, with new flaunching, is all that is needed.

Best for: Upright stacks with weathered joints and some damaged bricks

Stack restraint or strapping

A stack that has leaned slightly but is otherwise sound can be restrained with stainless straps or ties fixed back to the roof structure or the gable. This stops further movement without taking the stack down, and is often combined with repointing.

Best for: Slightly leaning stacks with sound brickwork

What happens when we carry out chimney stack repairs in Hull?

  1. Look from the ground

    Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.

  2. Repair, restrain or rebuild

    The agreed work is carried out: repointing, new flaunching and pots, restraint, or taking the stack down and rebuilding it. Lead flashings where the stack meets the roof are checked and renewed if needed.

  3. Weatherproof and clear

    Caps or cowls are fitted where agreed, the roof around the stack is checked for slipped tiles, and debris is cleared from gutters. You receive photos of the finished stack taken from the scaffold, since it is hard to see from the ground.

Signs you may need chimney stack repairs

  • Chimney pots that are loose, tilted or cracked at the base
  • A stack visibly leaning when you look along the roof ridge
  • Cracked or missing flaunching around the top of the stack

How much will chimney stack repairs cost in Hull?

Guide prices below are for homes in Hull, on Yorkshire and the Humber rates and including VAT. A survey or good photos let us turn them into a fixed written price.

Guide prices inc VAT on Yorkshire and the Humber rates. Items marked est. are our estimates.
ItemGuide pricePer
Repointing, flaunching and minor brick repairs£475 – £1,900per stack
Partial or full stack rebuild£2,850 – £9,500per stack
Stack restraint or strappingest.£380 – £1,150per stack

Rules for chimney stack repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Chimney stack repairs in Hull: questions and answers

How much should I budget for chimney stack repairs in Hull?

Guide prices for chimney stack repairs in Hull start from about £475 per stack, including VAT, on Yorkshire and the Humber rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Can you survey a property in Hull?

We do. Hull and the surrounding area are covered, including nearby Beverley and Goole. A free initial assessment from your photos is the first step.

Why do houses in East Riding of Yorkshire crack?

The Yorkshire Wolds are chalk, while Holderness and Hull sit on glacial till and estuarine clays and silts. Soft alluvial ground near the Humber can settle, and the Holderness coast is one of the fastest-eroding in Europe. Only an investigation can say why a particular building has moved.

Why is my chimney stack leaning?

Most leaning stacks are caused by sulphate attack, where chemicals from old flue gases make the mortar expand more on the wetter side, so the stack bends away from the weather. Frost damage and failed pointing can make it worse. A recently leaning stack can also signal problems below.

Is a leaning chimney dangerous?

A leaning chimney can become dangerous, because stacks are heavy and stand high above the roof. A slight, long-standing lean may be stable for now, but a lean that is worsening, or loose bricks and pots, should be looked at quickly. Keep people away from below if anything looks loose.

Related work in Hull

Chimney stack repairs near Hull

Each part of a Hull chimney job, scaffold included, is itemised in our no-obligation written quote so you can see where the cost lies.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote