Beverley · East Riding of Yorkshire
Chimney stack repairs in Beverley
For terraced streets in Beverley, stacks are often shared between neighbours. We plan scaffold access and the work so both sides know what is involved, and we can price the stack as a whole if you want to split the cost.
Guide price from£475per stack inc VAT
- Postcodes
- HU17
- Population
- about 31,000
- Area
- East Riding of Yorkshire
- Pricing region
- Yorkshire and the Humber
Is East Riding of Yorkshire prone to ground movement?
We cover Beverley and its postcode districts HU17, part of East Riding of Yorkshire, with a population of roughly 31,000. We also take enquiries from nearby Hull (8 miles), Bridlington (19 miles) and Goole (21 miles).
Clay soils are found in parts of East Riding of Yorkshire. Ground movement here is more often linked to soils, drains and trees than to mining. What you mostly find across East Riding of Yorkshire: Victorian terraces in Hull, market-town houses in Beverley and Driffield, and post-war estates.
Is it time for chimney stack repairs? Common signs
- Bits of brick, mortar or render landing in the garden or gutter
- Chimney pots that are loose, tilted or cracked at the base
- A stack visibly leaning when you look along the roof ridge
What should you budget for chimney stack repairs in Beverley?
These are guide prices for Beverley, using Yorkshire and the Humber rates and including VAT. Your written quote follows photos or a survey, and is fixed once the repair is specified.
| Item | Guide price | Per |
|---|---|---|
| Repointing, flaunching and minor brick repairs | £475 – £1,900 | per stack |
| Partial or full stack rebuild | £2,850 – £9,500 | per stack |
| Stack restraint or strappingest. | £380 – £1,150 | per stack |
Repair options we may recommend
Stack restraint or strapping
A stack that has leaned slightly but is otherwise sound can be restrained with stainless straps or ties fixed back to the roof structure or the gable. This stops further movement without taking the stack down, and is often combined with repointing.
Best for: Slightly leaning stacks with sound brickwork
Flaunching and pot resetting
Old cracked flaunching is broken out, pots are lifted and reset or replaced, and new flaunching is formed to a fall so water runs off. Unused flues can be capped with ventilated caps, which keeps rain out while letting the flue breathe.
Best for: Loose pots and cracked mortar at the top of the stack
What to expect when we carry out chimney stack repairs
Look from the ground
Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.
Check what is below
We ask whether any chimney breasts have been removed, and check the loft and rooms below for cracking. If a breast has gone without proper support, we recommend an independent chartered structural engineer before any stack work.
Scaffold to the stack
Safe access is set up with a working platform around the stack. On terraces we may need to agree access over a neighbour’s roof, and a council licence is arranged where the scaffold stands on the pavement.
Rules for chimney stack repairs in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Your chimney stack repairs questions
What is the price of chimney stack repairs in Beverley?
Guide prices for chimney stack repairs in Beverley start from about £475 per stack, including VAT, on Yorkshire and the Humber rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you carry out chimney stack repairs in Beverley?
Yes, Beverley is covered, along with postcode districts HU17. We also cover nearby Hull and Bridlington.
Does the ground around Beverley cause cracking?
The Yorkshire Wolds are chalk, while Holderness and Hull sit on glacial till and estuarine clays and silts. Soft alluvial ground near the Humber can settle, and the Holderness coast is one of the fastest-eroding in Europe. Only an investigation can say why a particular building has moved.
Is a leaning chimney dangerous?
A leaning chimney can become dangerous, because stacks are heavy and stand high above the roof. A slight, long-standing lean may be stable for now, but a lean that is worsening, or loose bricks and pots, should be looked at quickly. Keep people away from below if anything looks loose.
Can a leaning stack be straightened?
Not by pushing it back, because the brickwork would crack. A slight lean on a sound stack can be restrained so it moves no further. A pronounced lean is fixed by taking the stack down to sound masonry and rebuilding it plumb.
More repairs we carry out in Beverley
- Brick arch repairs
- Subsidence insurance claim repairs
- Gable end wall repairs
- Retaining wall repairs
- Concrete repairs
Chimney stack repairs near Beverley
Send zoomed photos of the chimney stack at your Beverley home, from the street and the garden, for a free initial assessment.