Gloucestershire · England
Bowing wall repairs in Gloucestershire
Looking for bowing wall repairs in Gloucestershire? Send us photos for a free initial view. Clay soils are found in parts of Gloucestershire, so we look at the ground, drains and nearby trees before recommending anything.
Guide price from£1,050per wall inc VAT
- Area
- Gloucestershire
- Pricing region
- South West
- Ground
- Clay in parts
- Towns listed
- 7
Why does the ground in Gloucestershire matter for bowing wall repairs?
The Severn vale around Gloucester, Cheltenham and Tewkesbury is Lias and Mercia Mudstone clay, the Cotswolds are limestone, and the Forest of Dean has a historic coalfield. Parts of South Gloucestershire around Kingswood also lie on old Coal Measures.
Parts of Gloucestershire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Housing stock in Gloucestershire: Cotswold stone cottages, Regency terraces in Cheltenham, and brick estates around Gloucester.
Bowing wall repairs prices in Gloucestershire
For Gloucestershire we use South West rates. Treat the table as a budget guide, inc VAT; the price you pay is the one on your written quote.
| Item | Guide price | Per |
|---|---|---|
| Lateral restraint for a typical gable | £1,050 – £3,100 | per wall |
| Remedial restraint ties installed | £25 – £60 | per tie |
| Partial rebuild of a badly distorted sectionest. | £3,100 – £8,250 | per section |
How we usually approach bowing wall repairs
Restraint ties into the floor
Stainless restraint ties are drilled through the wall and fixed into the floor joists or into blocking between them. Where joists run parallel, noggins are fitted across several joists so the tie has something solid to hold. A neat plate or a buried fixing is left on the outside face.
Best for: Walls bowing at floor level where joists run alongside
Stitching a delaminating wall
Where the layers of a solid wall have separated, long stainless ties are drilled in from the face and bonded into the inner layer to bind the wall together again. This is often combined with restraint ties, so the wall is both reconnected through its thickness and tied back to the structure.
Best for: Solid walls where the outer layer has pulled away
Partial rebuild
A section that has bowed beyond safe limits, or where bricks have crushed, is propped, taken down and rebuilt plumb with restraint built in. It is the most disruptive option, so it is kept to the area that genuinely needs it.
Best for: Badly distorted sections that cannot be tied back
What happens during bowing wall repairs, step by step?
Assess the bow
We look at where the wall bows, how far it is out of plumb and how the floors and roof meet it. Photographs from your phone held flat against the wall often show the shape clearly before anyone visits.
Decide restrain or rebuild
If the wall is badly out of plumb, has bricks crushing or follows removed internal walls, we recommend an engineer, and can arrange one. Their view sets whether restraint is enough or a section needs rebuilding.
Open up inside
Floorboards or a ceiling strip are lifted along the affected wall to expose the joists. We fit noggins where joists run alongside, and plan furniture moves with you, since this is the most disruptive part of the job.
What to look for before calling about bowing wall repairs
- Horizontal cracking at first-floor or ceiling level
- Internal plaster cracks where a wall meets the ceiling
- Gaps opening between floorboards and the skirting on an outside wall
- Window frames pulling away from the brickwork at the sides
Do you need approval for bowing wall repairs in England?
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Towns in Gloucestershire we cover for bowing wall repairs
Questions about bowing wall repairs in Gloucestershire
Is the ground in Gloucestershire prone to subsidence?
The Severn vale around Gloucester, Cheltenham and Tewkesbury is Lias and Mercia Mudstone clay, the Cotswolds are limestone, and the Forest of Dean has a historic coalfield. Parts of South Gloucestershire around Kingswood also lie on old Coal Measures. Parts of Gloucestershire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Only an investigation on site can say why a particular building has moved.
How much will bowing wall repairs cost in Gloucestershire?
On South West rates, bowing wall repairs starts from about £1,050 per wall, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.
Will I need to move out during bowing wall repairs?
Usually not. Restraint work means lifting some floorboards or a strip of ceiling along one wall, so a room or two is disrupted for a few days. A partial rebuild of an external wall can be more involved, and we will talk it through with you first.
Can a bowing wall be pushed back straight?
Usually not. Masonry rarely returns to plumb without cracking, so the normal aim is to stop further movement and leave the wall where it is. If the bow is too great to accept, that section is rebuilt rather than forced back.
Does a bowing wall need an engineer?
Often it does, especially if the bow is large, growing or linked to removed internal walls or chimney breasts. Small, long-standing bows can sometimes be restrained to a standard detail. Where the repair needs an engineer’s design or sign-off, we can arrange an independent chartered structural engineer.