Maltby · South Yorkshire
Wall tie replacement in Maltby
For landlords with older housing stock in Maltby, wall ties are worth checking before the cracks appear. A short survey on each elevation gives you a clear record and a priced plan if replacement is needed.
Guide price from£1,700per house inc VAT
- Postcodes
- S66
- Population
- about 18,000
- Area
- South Yorkshire
- Pricing region
- Yorkshire and the Humber
What is the ground like in South Yorkshire?
Maltby, South Yorkshire: about 18,000 residents across postcode districts S66. Nearby places we cover include Dinnington (3 miles), Conisbrough (5 miles) and Rotherham (7 miles).
Parts of South Yorkshire have clay that can shrink near trees in dry spells. Historic coal workings are recorded beneath parts of South Yorkshire, and a coal mining search is worth checking where movement is unexplained. Across South Yorkshire, most homes are brick and stone terraces, colliery housing, inter-war council estates and post-war semis.
Guide prices for wall tie replacement in Maltby
Prices in Maltby are worked out on Yorkshire and the Humber rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.
| Item | Guide price | Per |
|---|---|---|
| Mid-terrace houseest. | £1,700 – £3,300 | per house |
| Semi-detached house | £2,400 – £4,750 | per house |
| Detached houseest. | £3,300 – £6,650 | per house |
| Scaffolding where neededest. | £570 – £1,700 | per elevation |
Methods for wall tie replacement
Remedial tie installation
New stainless ties are drilled through the outer leaf into the inner leaf, then fixed by mechanical expansion or resin, depending on the masonry. They are placed to a set grid across each elevation, with extra ties around openings and at the edges. Holes are made good in matching mortar.
Best for: Walls where the original ties have failed or are missing
Removing old ties and rebedding
On badly cracked elevations the old ties are cut out from the outer face, the joints raked and rebedded, and the brickwork repointed. It is more work than isolation but removes the source of expansion entirely. An engineer or the survey report usually specifies where this is needed.
Best for: Elevations with severe cracking or lifting
From first photo to finished repair
Tie survey
A metal detector locates the existing ties and shows their pattern. Small holes are then drilled at sample points and a borescope passed into the cavity to see the tie condition, type and embedment. The holes are made good afterwards.
Install the new ties
New stainless ties are drilled and fixed to the specified grid, with closer spacing around windows, doors and the roofline. Sample ties can be pull-tested to confirm they are holding in your particular brick and block.
Deal with the old ties and make good
Old ties are isolated or removed where the report calls for it, cracked joints are raked out and repointed, and drilled holes are filled in matching mortar. A written note of tie positions and findings goes in your property file.
Symptoms that point to wall tie replacement
- Horizontal cracks along mortar joints, repeating every few brick courses
- The roof edge or verge lifting slightly above the brickwork
- A house built before the 1980s on an exposed or coastal site
Rules for wall tie replacement in England
Like-for-like repairs such as crack stitching and repointing do not usually need building control approval in England, but anything that changes or strengthens the structure, such as underpinning or rebuilding a wall, does. If the work touches a party wall, the Party Wall etc. Act 1996 may apply.
Frequently asked questions
How much should I budget for wall tie replacement in Maltby?
Guide prices for wall tie replacement in Maltby start from about £1,700 per house, including VAT, on Yorkshire and the Humber rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Can you survey a property in Maltby?
Yes, Maltby is covered, along with postcode districts S66. We also cover nearby Dinnington and Conisbrough.
Why do houses in South Yorkshire crack?
South Yorkshire lies largely on the Coal Measures, with a long history of shallow and deep mining around Barnsley, Rotherham and Doncaster. Sheffield's hillside sites add retaining walls and steep ground to the mix. Only an investigation can say why a particular building has moved.
How do I know if my wall ties have failed?
The clearest sign is horizontal cracking in the mortar joints repeating every few courses, often with a bulge or a lifted roofline. Wire ties can fail with no cracking at all, so a tie survey with a metal detector and borescope is the only reliable check.
Can wall ties be replaced on a rendered house?
Yes, new ties can be fitted through render, with each drill hole made good afterwards. The repairs can show on painted render, so redecoration of the affected elevation is often worth including. Render can also hide the cracking pattern, so a survey matters more.
Related work in Maltby
- Resin injection ground stabilisation
- Underpinning
- Crack stitching
- Gable end wall repairs
- Bowing wall repairs
Wall tie replacement near Maltby
Pick your house type in our quote tool for a Maltby wall tie guide price, then book a survey to confirm what condition the ties are in.